Nancy Grace Roman Space Telescope coronagraph instrument overview and status

Vanessa P. Bailey, Eduardo Bendek, Brian Monacelli, Caleb W. Baker, Gasia Bedrosian, Eric Cady, Ewan S. Douglas, Tyler D. Groff, S. R. Hildebrandt, N. Jeremy Kasdin, John Krist, Bruce Macintosh, Bertrand Mennesson, Patrick Morrissey, Ilya Poberezhskiy, Hari B. Subedi, Jason Rhodes, Aki Roberge, Marie Ygouf, Robert T. Zellem, Feng Zhao, Neil T. Zimmerman

Abstract

The Nancy Grace Roman Space Telescope Coronagraph Instrument (CGI) is a critical technology demonstrator for NASA's Habitable Worlds Observatory (HWO). With a predicted visible-light flux ratio detection limit of $10^{-8}$ or better, it will be capable of reaching new areas of parameter space for both gas giant exoplanets and circumstellar disks. It is in the final stages of integration and test at the Jet Propulsion Laboratory, with an anticipated delivery to payload integration in the coming year. This paper reviews the instrument systems, observing modes, potential observing applications, and overall progress toward instrument integration and test.

Introduction

Directly imaging an Earth-like planet around a Sun-like star is one of the most significant technical challenges in modern astronomy. It requires the ability to resolve a planet at a contrast ratio of $10^{-10}$ relative to its host star—an analogy often described as spotting a firefly next to a lighthouse from miles away. Current space-based facilities, such as the Hubble Space Telescope (HST) and the James Webb Space Telescope (JWST), are limited to contrast ratios between $10^{-4}$ and $10^{-6}$ in the visible and near-infrared spectrums. The Roman Coronagraph Instrument (CGI) is designed to bridge this "technology gap," serving as a high-stakes stepping stone toward the future Habitable Worlds Observatory.

Bridging the Contrast Gap

CGI aims for a visible-light flux ratio detection limit of $10^{-8}$ or better. While this is still two orders of magnitude away from the $10^{-10}$ required for a true "exo-Earth," it represents a massive leap over current capabilities. By flight-testing extreme-contrast imaging technologies in the harsh environment of space, CGI will significantly "buy down risk" for future missions.

Predicted performance of Roman CGI compared to existing space telescopes and known exoplanets. Instrument curves represent 5-sigma post-processed detection limits.

As shown in the performance comparison, CGI will access a regime of separation and flux ratio previously unreachable by ground-based or existing space-based observatories, enabling the study of self-luminous and reflected-light gas giants.

Instrument Architecture and Methods

To achieve its unprecedented precision, the CGI employs several novel engineering techniques:

  • Active Wavefront Control: The system utilizes two Xinetics 48x48 actuator deformable mirrors (DMs) to correct optical aberrations with picometer-level precision.
  • Advanced Coronagraphy: The instrument uses Hybrid Lyot and Shaped Pupil masks optimized for Roman’s obscured pupil, which includes a large central obscuration and six secondary mirror supports.
  • Dual-Layer Wavefront Sensing:
    • Low-Order (LOWFS): This system uses starlight rejected by the coronagraph mask to provide high-speed (1kHz) tip/tilt control.
  • High-Order (HOWFS): Due to limited onboard processing power, CGI uses a "Ground-in-the-loop" (GITL) architecture. Science images are downlinked, analyzed on the ground to compute DM commands, and then uplinked back to the telescope.
  • Specialized Detectors: The instrument uses Electron Multiplying CCDs (EMCCDs) engineered for radiation resilience. A "gain register overspill" technique was developed to reduce cosmic ray "tails" by more than 2x, improving effective quantum efficiency in the L2 environment.
Detailed layout of the CGI optical bench, illustrating the complex arrangement of off-axis parabolic mirrors (OAPs), deformable mirrors (DMs), and various sensing modules.

Key Engineering Insights

During the integration and testing phase at the Jet Propulsion Laboratory (JPL), several critical insights were gained:

  1. Ground-in-the-loop Necessity: The decision to move high-order wavefront sensing to the ground highlights the constraints of space-rated computing. This architecture allows for more flexible algorithm updates post-launch, ensuring the instrument can adapt to on-orbit conditions.
  2. Compensating for "Dry-out" Astigmatism: The team discovered that the DMs developed native astigmatism, likely due to material dry-out during integration. This was successfully mitigated by deliberately misaligning other mirrors in the optical train to cancel the error, allowing the system to beat its wavefront error requirements.
  3. Radiation Resilience: Engineering the detectors to survive high-energy particles at L2 resulted in a $\sim 3\times$ improvement in effective quantum efficiency compared to standard commercial devices.

Performance Results and Mission Status

CGI is expected to achieve detection limits better than $10^{-8}$ flux ratio at separations of 3–9 $\lambda/D$. End-to-end wavefront error has been measured at $<45$ nm RMS, comfortably meeting the 60 nm requirement. The instrument is currently in the final stages of integration at JPL. A launch is planned for May 2027, followed by a 2,200-hour "Tech Demo Phase" during the first 18 months of operation.

Limitations and Future Outlook

Despite its advanced design, CGI faces inherent constraints. The Roman Space Telescope was not originally designed for coronagraphy, meaning the CGI must work with a challenging, obscured pupil that limits theoretical maximum contrast. Furthermore, ground-based Thermal Vacuum (TVAC) testing cannot fully replicate on-sky performance due to the stability limits of test chambers and gravity sag on the primary mirror. True performance verification, including "dark hole digging" (the process of clearing starlight noise), will only be possible once the telescope reaches the zero-gravity environment of space.

Summary updated

Abstract

The Nancy Grace Roman Space Telescope Coronagraph Instrument is a critical technology demonstrator for NASA’s Habitable Worlds Observatory. With a predicted visible-light flux ratio detection limit of 10<sup>−8</sup> or better, it will be capable of reaching new areas of parameter space for both gas giant exoplanets and circumstellar disks. It is in the final stages of integration and test at the Jet Propulsion Laboratory, with an anticipated delivery to payload integration in the coming year. This paper will review the instrument systems, observing modes, potential observing applications, and overall progress toward instrument integration and test.
BibTeX
@misc{bailey2023nancy,
  author = {Vanessa P. Bailey and Eduardo Bendek and Brian Monacelli and Caleb W. Baker and Gasia Bedrosian and Eric Cady and Ewan S. Douglas and Tyler D. Groff and S. R. Hildebrandt and N. Jeremy Kasdin and John Krist and Bruce Macintosh and Bertrand Mennesson and Patrick Morrissey and Ilya Poberezhskiy and Hari B. Subedi and Jason Rhodes and Aki Roberge and Marie Ygouf and Robert T. Zellem and Feng Zhao and Neil T. Zimmerman},
  title = {{Nancy Grace Roman Space Telescope coronagraph instrument overview and status}},
  year = {2023},
  eprint = {2309.08672},
  archivePrefix = {arXiv},
  url = {https://arxiv.org/abs/2309.08672},
}
Figure