Motion Response of Floating Platform Hoisting Impeller Based on Fully Coupled Model

Xinghua Shi, Wei Zhang, Qingqing Ben, Jing ZhangJournal of Physics Conference Series 2023 · DOI

Abstract

Given the construction efficiency and operation safety of offshore wind turbine hoisting, it is necessary to study the motion response characteristics of a floating platform-hoist coupling system. Using SESAM hydrodynamic calculation software, a fully coupled model of a floating crane ship and fan impeller is established. The accuracy of the calculation model is verified by comparing the numerical simulation results with the pool experimental results. Based on this research, the sensitivity factors of floating crane ship motion are analyzed. The results show that the floating crane should choose the bow-top wave operation to minimize the rolling motion of the hull. The wind speed and the elevation angle of the boom have a great influence on the motion of the floating crane. The larger the wind speed, the greater the motion response of the hull, the smaller the elevation angle of the boom, and the larger the roll value of the hull. The higher the impeller height, the greater the motion displacement of the floating crane, but the influence is different on the hull motion under different working conditions. The results of the simulation analysis can provide a reference and basis for offshore wind turbine hoisting.

Introduction

Installing offshore wind turbines is a high-stakes balancing act. Unlike land-based construction, floating cranes must contend with wind, waves, and currents that cause the ship to move in six degrees of freedom. When a heavy object like a turbine impeller is hoisted, its swinging motion (sloshing) couples with the ship's movement, creating a nonlinear feedback loop that can endanger the crew and equipment. This paper develops and validates a fully coupled numerical model to simulate how a floating crane ship behaves while hoisting a massive wind turbine impeller.

Methodology

The researchers employed a multi-pronged approach to bridge the gap in current crane ship-lifting dynamics research. They used SESAM hydrodynamic software (specifically the SIMO module) to build a time-domain analysis model integrating the hull, the lifting system (cables and boom), and the mooring system.

Computational Theory

The motion equations were derived using the momentum theorem and vector derivation rules, accounting for the coupling forces ($F_{c/s}$) and moments ($M_{c/s}$) exerted by the swinging impeller on the hull. This mathematical framework allows for the simulation of the complex interactions between the floating platform and the suspended load.

Mathematical model of the coupled floating crane and impeller system showing coordinate systems and vector relationships.

Experimental Validation

To ensure the simulation reflected reality, the researchers compared their numerical results against data from a 1:50 scale physical pool model. They focused on Response Amplitude Operators (RAOs)—a transfer function that defines how a ship responds to different wave frequencies. The simulations used the JONSWAP wave spectrum (a standard for North Sea conditions) with a significant wave height of 2.5m, wind speeds up to 12 m/s, and a standard 5-MW reference wind turbine impeller.

Key Results and Validation

The numerical model showed high accuracy, with a maximum error of only 3.05% compared to the physical pool experiments, verifying its reliability for engineering use.

Comparison of numerical and experimental RAO results for surge and roll motions, demonstrating the model's high accuracy.

Sensitivity Analysis

  • Wave Directionality: The study found that wave angle is the most significant factor for stability. Operating in "beam seas" (90° waves) causes the most dramatic sway and surge, whereas "head seas" (0° or 180°) are much more stable.
  • Wind Sensitivity: In a 90° wave direction, increasing wind speed from 6 m/s to 12 m/s more than doubled the maximum displacement of the system (from 1.646m to 4.218m).
  • Boom Configuration: There is a direct sensitivity to the boom's elevation. A smaller elevation angle increases the roll value of the hull because it effectively increases the lever arm through which the load's weight acts on the ship's stability.
  • Height-Dependent Coupling: Increasing the height of the impeller increases the overall motion displacement. For side-lifting, height primarily drives roll; for bow-lifting, it primarily drives pitch.

Conclusion

The researchers concluded that to minimize dangerous rolling, operators should prioritize bow-top wave operations (positioning the ship's bow into the waves) and maintain higher boom elevation angles where possible. While the model is highly accurate for the 5-MW turbine class, future work will need to address the extreme mass ratios of 10-MW and 15-MW "mega-turbines" and explore active heave compensation systems to further mitigate environmental forces.

Summary updated

Abstract

Abstract Given the construction efficiency and operation safety of offshore wind turbine hoisting, it is necessary to study the motion response characteristics of a floating platform-hoist coupling system. Using SESAM hydrodynamic calculation software, a fully coupled model of a floating crane ship and fan impeller is established. The accuracy of the calculation model is verified by comparing the numerical simulation results with the pool experimental results. Based on this research, the sensitivity factors of floating crane ship motion are analyzed. The results show that the floating crane should choose the bow-top wave operation to minimize the rolling motion of the hull. The wind speed and the elevation angle of the boom have a great influence on the motion of the floating crane. The larger the wind speed, the greater the motion response of the hull, the smaller the elevation angle of the boom, and the larger the roll value of the hull. The higher the impeller height, the greater the motion displacement of the floating crane, but the influence is different on the hull motion under different working conditions. The results of the simulation analysis can provide a reference and basis for offshore wind turbine hoisting.
BibTeX
@article{shi2023motion,
  author = {Xinghua Shi and Wei Zhang and Qingqing Ben and Jing Zhang},
  title = {{Motion Response of Floating Platform Hoisting Impeller Based on Fully Coupled Model}},
  journal = {Journal of Physics Conference Series},
  year = {2023},
  doi = {10.1088/1742-6596/2458/1/012041},
}
Figure