Introduction
The International Maritime Organization (IMO) MARPOL Annex VI Tier III regulations mandate an 80% reduction in NOx emissions compared to Tier I for vessels operating in Emission Control Areas (ECAs). While earlier compliance could be achieved through internal engine modifications, Tier III necessitates advanced after-treatment technologies. This paper, originally published in the Journal of the JIME, explores the practical engineering challenges of integrating Selective Catalytic Reduction (SCR) systems into modern ship designs.
Technical Configurations: HP-SCR vs. LP-SCR
Shipbuilders must choose between High-Pressure (HP) and Low-Pressure (LP) SCR configurations. HP-SCR systems are positioned before the turbocharger, benefiting from high exhaust temperatures (approx. 400°C) that facilitate urea decomposition. Conversely, LP-SCR systems are installed after the turbocharger. While LP-SCR is often easier to retrofit or "bolt on," it frequently requires an auxiliary burner to maintain the exhaust temperatures necessary for the catalytic reaction.
Industry Adoption and Survey Results
A survey of 13 Japanese shipyards revealed varying levels of experience with SCR technology. Shipyards reported higher familiarity with installing SCR on auxiliary generators (10 out of 13) compared to main engines (7 out of 13). This discrepancy is largely attributed to the maturity of SCR technology for 4-stroke engines, which are typically used for generators. For generator SCR, the primary modification involves expanding the funnel or engine casing, whereas main engine SCR often requires significant expansion of the engine room itself.
Case Study: Trial Design for a 19,000 DWT Chemical Tanker
To quantify the "outfitting tax" of SCR, the authors performed a trial design for a 19,000 DWT chemical tanker using a DOOSAN LP-SCR system. The integration revealed massive spatial requirements:
- Reactor Dimensions: The LP-SCR reactor alone stood 4.9 meters tall.
- Structural Modifications: To accommodate the equipment, designers had to add an entire extra deck level to the engine room casing and widen the casing by 2 meters in the transverse direction.
- Weight and Balance: Placing heavy reactors high within the engine casing introduces new structural concerns regarding vibration and thermal expansion, requiring robust reinforcement.
Conclusion and Future Outlook
The integration of SCR systems represents a significant challenge for ship outfitting, often requiring substantial structural changes that can impact a vessel's overall dimensions. The authors conclude that future progress depends on the miniaturization of SCR components—specifically reactors and vaporizers—to minimize the impact on cargo volume. Additionally, designers must balance spatial constraints with the need for maintenance access, particularly for catalyst replacement and routine servicing of the urea supply system.
Summary updated