Abstract
This paper investigates the security and reliability of Beyond 5G (B5G) relay networks utilizing wireless energy harvesting. By incorporating realistic hardware impairments—specifically In-phase and Quadrature-phase Imbalance (IQI) and Channel Estimation Errors (CEEs)—alongside a nonlinear energy harvesting model, the research identifies a critical security-reliability trade-off. While hardware imperfections degrade overall reliability, they simultaneously enhance security by complicating signal interception for eavesdroppers.
Introduction
As B5G networks evolve, they face dual challenges: achieving high energy efficiency for massive IoT deployments and ensuring robust security against unauthorized interception. Physical Layer Security (PLS) has emerged as a promising solution, yet traditional models often assume ideal hardware. In practice, Radio Frequency (RF) front-ends suffer from IQI, and perfect channel state information is rarely available. This study bridges the gap between idealized theory and messy reality by analyzing a multi-relay system under these realistic constraints.
System Model and Methods
The proposed model features a source node communicating with a destination via multiple Decode-and-Forward (DF) relays. These relays are wireless-powered, harvesting energy from a dedicated power beacon using a Time-Switching (TS) protocol before data transmission.
Key technical components of the framework include:
- Nonlinear Energy Harvesting: Unlike simpler linear models, this accounts for the saturation effects of real-world harvesting circuits.
- Hardware Impairment Modeling: The authors incorporate asymmetrical IQI at both the transmitter (TX) and receiver (RX) branches.
- Relay Selection Strategies: The study compares three approaches: Optimal Relay Selection (ORS), Suboptimal Relay Selection (SRS), and Random Relay Selection (RRS).
- Analytical Framework: Exact, closed-form expressions for Outage Probability (OP) and Intercept Probability (IP) were derived and validated using extensive Monte Carlo simulations.
Key Insights and Results
The analysis reveals several critical findings regarding the impact of hardware non-idealities on network performance.
The Security-Reliability Trade-off
A primary insight is the "IQI silver lining." While IQI is generally a nuisance that increases the Outage Probability (reducing reliability), it paradoxically improves security. The hardware-induced signal distortions act as a form of natural scrambling, making it more difficult for an eavesdropper to successfully decode intercepted transmissions.
Performance Floors and Diversity
Due to Channel Estimation Errors (CEEs), the system encounters a performance ceiling. Beyond a certain transmit power ($P_B$), increasing power no longer reduces the Outage Probability. This results in a "diversity order" of zero in high-SNR regimes, where the curves flatten out regardless of power increases.
Quantitative Impact
- Reliability: ORS consistently provides the lowest OP compared to SRS and RRS. However, as shown in the results, all schemes eventually hit an "error floor" under non-ideal conditions.
- Security: Intercept Probability is notably lower in non-ideal hardware scenarios compared to idealized models, particularly in high-SNR regions.
- Energy Harvesting: There is a "sweet spot" for the time-allocation factor ($\alpha$). Excessive harvesting time reduces the window for data transmission, while insufficient time leaves relays with inadequate power.
Conclusion and Future Directions
This research underscores the necessity of considering hardware impairments in B5G network design. While these imperfections present challenges for reliability, they offer inherent security benefits that can be leveraged. Future work will extend this framework to include more complex fading models (e.g., Rician or Nakagami-m), scenarios with multiple colluding eavesdroppers, and Multi-Antenna (MIMO) systems to further align theoretical models with the complexities of next-generation wireless environments.
Summary updated