Abstract
The economic feasibility of Vehicle-to-Grid (V2G) technology is subject to a lot of debate due to the battery degradation costs associated with it. In this paper, the daily operational cost of a V2G system is calculated for three different types of Li-ion batteries and one new Li-S battery, and a comparative study is conducted to understand the conditions required to deploy a successful V2G system. Different models are applied in estimating the degradation of batteries with different battery chemistries. The best Li-ion battery for this system is found to be LiFePO4 even though it is the most expensive battery considered. It is also noted that the starting state-of-charge (SOC) relates to the operational costs non-linearly and an optimal starting SOC is calculated for minimizing operational cost. When these Li-ion batteries are replaced by the new double SEI layer Li-S batteries, additional cost benefits of about 17% are expected.
Introduction
Vehicle-to-Grid (V2G) technology promises to turn electric vehicles (EVs) into mobile power plants, potentially stabilizing the grid and providing revenue for owners. However, the hidden cost of battery degradation often makes it an economic gamble. Frequent charging and discharging to support the grid accelerates battery wear. If the cost of this degradation exceeds the savings on a utility bill, the system fails to be economically viable. This study evaluates four battery chemistries to determine which minimizes the total daily operational cost of a residential energy ecosystem comprising a home, solar generation, an EV, and stationary storage.
Methodology and System Architecture
The researchers developed a residential energy management model and employed a Genetic Algorithm (GA) in Matlab to minimize a multi-objective cost function. This function balances electricity purchases, sales back to the grid, and the calculated cost of battery degradation for both the EV and the Home Energy Storage (HES).
The study utilized localized environmental and load data from San Diego, California, alongside Time-of-Use (TOU) electricity tariffs. Key to the methodology was chemistry-specific modeling, applying distinct degradation models for three Li-ion types (LMO, LFP, and NMC) and a theoretical "double SEI layer" Lithium-Sulfur (Li-S) battery based on extrapolated experimental data.
Key Insights and Results
The analysis revealed that durability is more critical than initial unit price. LiFePO4 (LFP), despite being the most expensive chemistry per kWh in this study, yielded the lowest daily operational cost among Li-ion options due to its superior cycle life.
A significant finding was the non-linear relationship between the starting State-of-Charge (SOC) and operational costs. The model identified a "sweet spot" for EV operation to minimize wear while maintaining flexibility.
As shown in the figure above, starting the day at 50% SOC minimizes degradation costs. The comparative daily operational costs (including degradation) were:
- Li-S (Double SEI): $1.642/day
- LiFePO4 (LFP): $1.982/day
- LiMn2O4 (LMO): $1.983/day
- Li(NiMnCo)O2 (NMC): $2.235/day
The theoretical Li-S battery with double solid electrolyte interphase (SEI) layers outperformed the best Li-ion battery by approximately 17%, suggesting it could be a significant breakthrough for V2G applications if commercialized.
Conclusion
The study demonstrates that V2G is economically viable only when managed by intelligent control algorithms; without optimization, costs for an LFP system rose from $1.98 to $2.78. While Li-S batteries show immense promise, their current data is laboratory-based and requires further validation at scale. Future work should explore dynamic driving patterns and varying feed-in tariffs to further define the economic boundaries of residential V2G systems.
Summary updated