Abstract
This paper analyzes the application of a novel Lithium-Sulfur (Li-S) battery with the bilateral solid electrolyte interface to the cruise control of plug-in hybrid electric vehicles (PHEVs). An optimal cruise control strategy based on the dynamic programming algorithm is modified to include battery degradation cost during energy management. The degradation cost of a Lithium-ion Battery is used as a benchmark to analyze the degradation cost of Li-S battery of PHEVs. The comparison results demonstrated that the application of the new Li-S battery significantly reduces the cost of PHEVs.
Introduction
Plug-in Hybrid Electric Vehicles (PHEVs) represent a critical transition technology toward a zero-emission future. However, the widespread adoption of PHEVs is hindered by the high cost and limited lifespan of conventional Lithium-ion batteries (LiBs). LiBs are not only expensive to manufacture but also prone to degradation over time, which significantly impacts the long-term value and performance of the vehicle.
Lithium-Sulfur (Li-S) batteries have emerged as a promising alternative due to sulfur's abundance and a theoretical energy density nearly six times that of current LiBs. Historically, Li-S technology has been plagued by low power output and short cycle life, primarily due to "dendrite growth" and the "shuttle effect." This study evaluates a novel Li-S battery featuring bilateral solid electrolyte interface (SEI) layers designed to mitigate these issues, specifically within the context of PHEV cruise control.
Methodology
The research utilizes a comprehensive simulation framework to compare the novel Li-S battery against standard LiB benchmarks. The vehicle model incorporates an Internal Combustion Engine (ICE), an electric motor, and the battery system.
A key innovation in this study is the modification of the Dynamic Programming (DP) algorithm used for optimal cruise control. The standard cost function was updated to include battery degradation costs, forcing the energy management system to balance fuel economy with battery health. The simulation environment utilized the Urban Dynamometer Driving Schedule (UDDS), with 1,000 concatenated cycles to simulate long-term battery depletion from 100% to 10% State of Charge (SOC).
Battery Chemistry and Stability
The core of the proposed system is the novel Li-S battery with bilateral SEI layers. These protective layers on both the anode and cathode suppress the formation of lithium dendrites and the dissolution of polysulfides (the shuttle effect), which are the primary drivers of capacity loss in traditional Li-S designs.
As shown in Figure 2, the battery demonstrates exceptional stability. The capacity remains remarkably consistent over 2,500 cycles, and the Coulombic efficiency stays near 100%, validating the effectiveness of the bilateral SEI approach in maintaining active material and ensuring long-term reliability.
Results and System Performance
The integration of the Li-S battery into the PHEV powertrain yielded significant improvements in both degradation costs and operational consistency. The study found that the Li-S battery degradation cost is 94.1% lower than that of a standard LiB.
One of the most striking results is the consistency of the electrical range. As illustrated in Figure 3, the SOC curves for the first and last cycles are nearly identical for the Li-S battery. In contrast, benchmark LiB systems showed significant divergence over time, requiring the ICE to provide more power as the battery's capacity faded. By the 1,000th cycle, the Li-S vehicle's ICE only needed to provide 10.45% of total power at an average torque of 66.65 Nm, whereas the degraded LiB vehicle required 12.48% power at a much higher average torque of 116.07 Nm.
Conclusion
The application of bilateral SEI Li-S batteries in PHEVs offers a path toward drastically reducing battery-related costs and improving vehicle longevity. While challenges remain regarding instantaneous power density—potentially requiring hybrid systems with ultracapacitors—and thermal management in extreme conditions, the long-term stability of this technology is a major step forward. Future work will focus on scaling these laboratory-scale successes to full automotive battery packs and exploring real-world thermal stability.
Summary updated