In a conventional liquid battery electrolyte, metal ions (such as $\text{Li}^+$, $\text{Na}^+$, or $\text{Zn}^{2+}$) do not travel alone. Instead, they are enveloped by a dense cloud of solvent molecules, bound tightly by strong ion-dipole interactions. This configuration is known as a solvent-dominated solvation shell.
When this solvated ion complex migrates toward the negative electrode (anode) during charging, the solvent molecules in the inner shell are exposed to extreme reducing potentials. Consequently, these solvent molecules decompose first, forming a surface coating called the Solid Electrolyte Interphase (SEI). Because the raw materials for this layer come from the solvent, the resulting SEI is heavily organic.
Organic-rich SEIs are notoriously fragile, chemically unstable, and poor ionic conductors. Under the severe volume fluctuations that characterize high-capacity anodes—such as lithium metal or silicon—this fragile organic layer easily cracks. Fresh electrolyte continuously rushes into the fissures, decomposes, and consumes active lithium and liquid solvent. This parasitic cycle leads to rapid capacity fade and the growth of needle-like metal dendrites that can short-circuit the battery.
To overcome this limitation, researchers have pioneered a strategy known as solvation shell engineering. By shifting the primary solvation environment from solvent-dominated to anion-dominated, they force salt anions to decompose preferentially, building a radically different, highly stable interface.
Shifting the Balance to Anion-Dominated Shells
The core intuition behind solvation shell engineering is to alter the competitive landscape inside the microscopic fluid sheath surrounding the metal ion. If the coordination strength between the metal ion and the solvent is weakened, or if the local availability of salt anions is increased, anions can crowd out the solvent molecules to enter the inner solvation shell.
This structural shift transforms fully solvated "free" ions into Contact Ion Pairs (CIPs) and larger Aggregates (AGGs), where the salt anion directly coordinates with the metal cation. As Hongyu Liu et al. demonstrated in Solvation structure modulation via dipole–dipole interactions for high-rate lithium metal batteries exceeding 400 Wh kg−1, systematically reducing the coordination affinity of the solvent molecules forces more anions into the inner solvation sheath, fundamentally altering the electrolyte's bulk and interfacial behavior.
Why Anion Decomposition Builds Better Interfaces
When an anion-dominated solvation shell reaches the electrode surface, the chemistry of the resulting SEI changes completely. Salt anions typically possess a lower Lowest Unoccupied Molecular Orbital (LUMO) energy level than standard carbonate or ether solvent molecules. Because a lower LUMO level translates to a higher propensity to accept electrons, the anions decompose preferentially at the electrode interface before the solvent has a chance to react.
Instead of generating fragile organic polymers, the sacrificial decomposition of these coordinated anions yields a dense, inorganic-rich SEI dominated by species such as lithium fluoride ($\text{LiF}$), lithium nitride ($\text{Li}_3\text{N}$), or lithium oxide ($\text{Li}_2\text{O}$).
Zejun Sun et al. highlight this mechanism in Enabling an Inorganic-Rich Interface via Cationic Surfactant for High-Performance Lithium Metal Batteries, noting that an inorganic-dominated interface offers vastly superior mechanical strength to physically suppress dendrite growth. Furthermore, these inorganic species exhibit exceptionally low activation energy for metal-ion transport. This allows ions to diffuse rapidly and uniformly across the interface, promoting smooth, planar metal deposition rather than localized, dendritic clustering.
This mechanical robustness is equally vital for non-metal anodes that experience extreme physical stress. For instance, Shengwei Dong et al. showed in Breaking Solvation Dominance Effect Enabled by Ion–Dipole Interaction Toward Long-Spanlife Silicon Oxide Anodes in Lithium-Ion Batteries that tuning ion-dipole interactions to achieve an anion-dominated state yields an inorganic-rich layer capable of successfully buffering the destructive volume expansion and void formation typical of silicon-based materials.
Chemical Levers for Solvation Engineering
Researchers utilize several distinct chemical strategies to manipulate the composition of the inner solvation shell:
- Weak-Affinity Solvents: By selecting solvents with low dielectric constants or weak dipole moments, the intrinsic thermodynamic drive for the solvent to encapsulate the cation is minimized. Xiaozhe Zhang et al. leveraged this approach in A dicarbonate solvent electrolyte for high performance 5 V-Class Lithium-based batteries, using a dicarbonate formulation with weak solvent-cation interactions to promote CIPs and AGGs. This configuration forces anion decomposition, simultaneously forming protective interphases on both the highly reactive lithium anode and the high-voltage cathode.
- Localized High Concentrations: Rather than increasing salt concentration across the entire bulk electrolyte—which raises cost and viscosity—researchers use Localized High-Concentration Electrolytes (LHCEs). As reviewed by Ao Du et al. in Regulating Lithium Metal Nucleation and Growth for Dendrite Suppression: from Liquid-Electrolyte to Solid-State Batteries, adding an inert, non-coordinating diluent maintains a locally crowded salt-to-solvent ratio. This local crowding ensures that anions remain dominant within the cation's immediate coordination sphere.
- Targeted Additives and Secondary Cations: Introducing specialized additives can directly alter the primary solvation structure or provide highly reactive sacrificial species. Hannah Cho et al. demonstrated in Interconvertible and rejuvenated Lewis acidic electrolyte additive for lean electrolyte lithium sulfur batteries that introducing specific secondary metal cations can modulate the primary lithium solvation shell to favor the formation of a robust, $\text{LiF}$-rich SEI. Similarly, in aqueous battery chemistry, Wenbao Liu demonstrated in Ultra‐Stable Aqueous Zinc Anodes: Enabling High‐Performance Zinc‐Ion Batteries via a ZnSiF6‐Derived Protective Interphase that adding $\text{ZnSiF}_6$ to the electrolyte directs the in-situ generation of a fluorine-rich protective layer, shielding the zinc anode from parasitic water side-reactions.
Immobilizing Anions for Uniform Mass Transfer
Beyond changing the chemical composition of the interface, managing the spatial behavior of anions solves a secondary, equally critical failure mode: concentration polarization.
In a typical liquid electrolyte, when a battery is charged rapidly, cations are quickly depleted at the electrode surface. If anions are free to diffuse away from the electrode, an ion-depletion zone forms. This localized drop in ion concentration creates a severe electrical impedance gradient, which triggers unstable, rapid dendritic growth.
To combat this, researchers have extended the concept of anion engineering to physical immobilization. By anchoring anions to a stationary framework or a quasi-solid matrix, they restrict negative charge mobility while allowing the target metal cations to flow freely.
Xueer Xu et al. demonstrated this effect in Quasi-Solid Electrolyte Interphase Boosting Charge and Mass Transfer for Dendrite-Free Zinc Battery. By anchoring electrolyte anions within the porous defects of a solid framework on the anode, the authors restricted anion movement and significantly increased the cation transference number. This immobilization eliminates concentration polarization at the electrode surface and creates a localized ion reservoir, ensuring a continuous, uniform supply of charge carriers that enables dendrite-free metal deposition even under high-rate operation.