Abstract
While most Vehicle-to-Grid (V2G) research focuses on managing massive fleets to stabilize national power grids, this study shifts the focus to the individual homeowner. By simulating a single household equipped with rooftop solar and a V2G-capable electric vehicle (EV), we demonstrate that a simple energy management strategy can increase household "energy profits" by over 9% while significantly reducing peak demand on the grid. This approach addresses the "chicken and egg" problem of V2G adoption by highlighting immediate, tangible financial benefits for individual users.
Introduction
The transition to renewable energy faces a major hurdle: intermittency. Solar panels produce power when the sun shines, which often misaligns with household electricity demand—a phenomenon known as the "duck curve." V2G technology, which allows EVs to both draw from and push power back to the grid, offers a promising solution for energy storage.
However, existing research often assumes the necessity of large-scale fleet aggregation, raising concerns about data privacy and individual autonomy. This paper tackles the challenge of proving that V2G offers immediate financial benefits to a single household, regardless of neighborhood-wide adoption. By focusing on the household level, the study bypasses social and political hurdles, providing a direct incentive for individual technology adoption.
Methodology and System Model
The researchers developed an "energy management artifact"—a control algorithm—and evaluated it using a MATLAB simulation. The core of the approach is a utility function that balances electricity costs against the satisfaction of mobility needs.
The system model, as illustrated in the figure above, tracks energy flows between the PV installation, the household demand ($D(t)$), the EV battery ($S(t)$), and the distribution grid. Two primary strategies were compared:
- Benchmark Strategy ($s_0$): The EV charges using excess solar power or the grid but never discharges back to the house.
- V2G Strategy ($s_{V2G}$): The EV acts as a residential battery. If household demand exceeds solar production, the EV discharges stored energy to the home, provided the battery remains above a "safety buffer" ($S^{MIN}$) required for mobility ($M(t)$).
The simulation utilized high-fidelity datasets, including 15-minute interval load profiles from the BDEW, real-world solar traces from a 5.58 kWp installation in Bavaria, and mobility patterns from the "Mobility in Germany" study. The EV specifications were based on the Mitsubishi i-MiEV (16 kWh battery).
Key Results
The simulation, conducted over a sample week in August, yielded significant quantitative improvements under the V2G strategy:
- Profit Increase: Household "energy profit" (solar feed-in revenue minus grid procurement costs) increased by 9.15% (€27.17 vs €24.89).
- Grid Independence: Energy purchased from the grid was reduced by 55.83%.
- Reduced Feed-in: Excess solar feed-in to the grid decreased by 14.07%, as more energy was stored and consumed locally.
- Peak Shaving: The EV successfully dampened evening load peaks (6 PM – 8 PM) by discharging stored solar energy when the household returned home.
Discussion and Future Work
The study demonstrates that simple "if-then" logic based on current battery state and PV output is sufficient to generate profit without requiring complex AI or predictive forecasting. Furthermore, the strategy optimized for the homeowner's wallet naturally benefits the utility provider by reducing peak load stress on the distribution grid.
Limitations of the current model include a fixed safety buffer and the exclusion of battery degradation costs. Future work could incorporate predictive modeling to dynamically adjust the mobility buffer based on weather and driving forecasts. Additionally, exploring Plug-in Hybrids (PHEVs) might offer greater flexibility, as the combustion engine provides a safety net that allows for more aggressive battery discharging for household use.
Summary updated