410 Theoretical Study on Aerodynamic Characteristics of Horizontal Axis Wind Turbine : Application of Energy・Momentum-Blade Element Combined Theory to NACA 44xx Aerofoil Blade

Koki Kishinami, Jun Suzuki, Himsar Ambarita, Takahiro Koikeda, Masayuki Fukushi, Hiroshi Ibano, Hiroyuki Sagayama, Yasuhiko ShinyaThe Proceedings of the Symposium on Environmental Engineering 2005 · DOI

This research, presented at the 15th Environmental Engineering General Symposium (2005) by researchers from the Muroran Institute of Technology, provides a rigorous theoretical framework for optimizing Horizontal Axis Wind Turbines (HAWT). By combining traditional momentum and blade element theories with an energy-based approach, the authors offer a detailed look at how blade geometry and count affect aerodynamic efficiency.

TL;DR

The authors propose a "Thrust-Energy" analytical method to evaluate wind turbine performance, proving it superior to standard methods for visualizing energy loss due to drag. Their analysis of NACA 44xx blades identifies the optimal blade count (3 blades) and pitch angles (16–20° root, 2° tip) to balance efficiency, startup torque, and structural safety.

What Problem Does This Paper Address?

Designing an efficient wind turbine is a balancing act between aerodynamics, structural integrity, and cost. While the Blade Element Momentum (BEM) theory is a standard tool, it often treats the system as a "black box" regarding where energy is actually lost.

The authors address the need for a more transparent analytical model that can account for:

  1. Drag Dissipation: Quantifying exactly how much energy is lost to air resistance on the blades.
  2. Geometric Optimization: Determining how variables like blade count, root pitch, and tip pitch interact to affect the power coefficient ($C_p$) and torque.
  3. Scale Effects: Explaining why larger turbines tend to be more efficient than smaller models beyond just having a larger swept area.

Methods

The researchers utilized the Strip Element Method, dividing the turbine blade into small radial sections (strips) and calculating the forces on each. The core novelty lies in the Energy-Momentum-Blade Element Combined Theory. They compared two analytical paths:

  • Thrust-Torque Method: The traditional approach focusing on mechanical forces.
  • Thrust-Energy Method: An approach that evaluates the relationship between the kinetic energy of the flow and the energy absorbed by the blades.

While both methods yield identical final results for power output, the authors argue the Energy Method is superior because it explicitly calculates $L_{dis}$ (dissipation energy due to drag). This allows engineers to see the "cost" of drag as a function of the tip speed ratio ($\lambda$).

Key Insights and Ideas

The "Energy Method" Advantage

By calculating drag dissipation ($C_{pd}$), the authors show that at high rotation speeds (high $\lambda$), the energy lost to drag increases cubically with the relative wind velocity. This explains the sharp drop-off in efficiency at high speeds.

The 3-Blade Compromise

While 2-blade turbines can be slightly more efficient at very high speeds, they suffer from vibration and poor wind-tracking. 5-blade turbines provide massive startup torque but suffer from high drag losses at operational speeds. 3 blades remain the optimal industrial standard for balancing stability and efficiency.

Comparison of power coefficients (Cp) and energy losses for different blade counts.

Pitch Sensitivity

The tip pitch angle is a much more sensitive parameter for performance than the root pitch. A tip pitch of 2° was found to be optimal; even slight increases significantly degrade the power coefficient. Conversely, higher root pitch angles (e.g., 28°) improve startup torque and safety (less thrust force) but result in lower peak efficiency.

Effect of pitch angle on power coefficient (Cp) and drag dissipation (Cpd).

Reynolds Number & Scale

Larger turbines (higher $R_0$) are inherently more efficient. This isn't just because they are bigger, but because they operate at higher Reynolds numbers, where the lift-to-drag ratio of the NACA 44xx aerofoil is physically superior.

Key Results

  • Optimal Pitch: For the tested NACA 44xx blades, a root pitch of 16–20° and a tip pitch of 2° yielded the highest power coefficients.
  • Performance Peak: The power coefficient ($C_p$) typically peaks at a tip speed ratio ($\lambda$) between 4 and 6 for the optimized 3-blade configuration.
  • Wake Behavior: The study visualized wake velocity ($V_w$), finding that optimized blades achieve high energy absorption without causing "backflow" at the tips, which can occur in over-rotated, low-pitch designs.

Limitations and Future Work

  • 2D to 3D Approximation: The model relies on 2D aerofoil data. While the strip element method is robust, it may not fully capture complex 3D flow effects at the very tip or root of the blade.
  • Steady State: The analysis assumes steady wind conditions. Real-world performance involves turbulence and gusting, which would require unsteady aerodynamic modeling.
  • Structural Constraints: The paper focuses on aerodynamics. In practice, the "optimal" aerodynamic blade might be too thin or heavy to be manufactured affordably, a trade-off the authors acknowledge but do not model deeply.

Summary updated

Abstract

The Aerodynamic performance characteristics of a horizontal axis wind turbine (HAWT) using by NACA44xx aerofoil series as known the detail date of C_L C_D were investigated theoretically by an analysis involving a combination of momentum, energy, and blade element theory by means of the strip element method. In this study, two approaches involving combination analysis are made use of, namely, the thrust-torque and thrust-energy methods. Although both approaches yield identical results, the latter is superior for evaluating the relationship of the kinetic energy of the flows on blades. The theoretical characteristics of the HAWT using the different types of the blades such as, blade dia., coard length, twist pitch angle, are discussed by reference to the power torque and thrust coefficient, C_p, C_q, C_T, C_<th>, and the tip speed ratio λ from the point of view of the optimum design and controlling.
BibTeX
@inproceedings{kishinami2005theoretical,
  author = {Koki Kishinami and Jun Suzuki and Himsar Ambarita and Takahiro Koikeda and Masayuki Fukushi and Hiroshi Ibano and Hiroyuki Sagayama and Yasuhiko Shinya},
  title = {{410 Theoretical Study on Aerodynamic Characteristics of Horizontal Axis Wind Turbine : Application of Energy・Momentum-Blade Element Combined Theory to NACA 44xx Aerofoil Blade}},
  booktitle = {The Proceedings of the Symposium on Environmental Engineering},
  year = {2005},
  doi = {10.1299/jsmeenv.2005.15.363},
}
Figure