Signal Partitioning for Integrated Data and Energy Transfer

47 concepts42 papers1 proposal

Every electromagnetic wave carries two things: a shape and a force. The shape can be modulated to encode information, while the oscillating field exerts a physical force on electrons, transferring electrical energy. For decades, wireless communication systems focused entirely on the shape, treating the energy of the radio wave as a minor casualty of propagation loss.

With the explosion of low-power Internet of Things (IoT) devices, wireless sensors, and autonomous drones, a compelling question has emerged: Can we harvest both the data and the energy from the exact same wireless signal?

This idea is known as Simultaneous Wireless Information and Power Transfer (SWIPT), or its optical counterpart, Simultaneous Lightwave Information and Power Transfer (SLIPT). As noted in a foundational survey by Stefano Buzzi et al. in A Survey of Energy-Efficient Techniques for 5G Networks and Challenges Ahead, enabling devices to extract both data and energy from a single transmission is a cornerstone of building self-sustaining, energy-autonomous networks.

The Fundamental Hardware Bottleneck

To understand why this is challenging, we have to look at the physical constraints of receiver hardware. You cannot simply plug a single wire into both a data decoder and a battery charger simultaneously.

An information decoder operates by sampling the delicate voltage variations of an incoming alternating current (AC) signal. It requires high-precision, low-noise linear amplifiers and analog-to-digital converters. Conversely, an energy harvester operates by routing the signal through a rectifying circuit (a rectenna) containing diodes and capacitors to smooth the AC wave into a stable direct current (DC) that can replenish a battery.

As explained by Kun Yang et al. in Data and energy integrated communication networks, standard receiver circuits cannot perform both operations on the same signal stream without destroying the properties required by the other. If you pass the signal through the rectifier first, you obliterate the phase and frequency modulations needed to decode data. If you pass it through the decoder first, the energy is dissipated as heat or consumed by the sampling circuitry, leaving nothing to harvest.

To bypass this physical limitation, researchers use signal partitioning mechanisms to divide the incoming waveform before processing.

Architectural Solutions for Signal Partitioning

Modern receivers split the incoming signal using three primary strategies: time switching, power splitting, or component separation.

Incoming Signal ───► [ Signal Partitioning Mechanism ]
                             │
                             ├───► Energy Harvester (Rectenna) ───► Battery
                             │
                             └───► Information Decoder ───────────► Data Out

Time Switching (TS)

In a time-switching architecture, the receiver alternates between the two functions over time. For a fraction of a time slot, the antenna is connected exclusively to the energy harvester; for the remainder of the slot, it switches to the information decoder. While simple to implement, time switching introduces a strict latency penalty and reduces the continuous data throughput of the system.

Power Splitting (PS)

To achieve true concurrency, a power-splitting architecture uses a passive component (like an asymmetric power divider) to split the incoming signal in the power domain. A fraction of the signal power, denoted as $\rho$, is sent to the energy harvester, while the remaining $1-\rho$ portion goes to the information decoder.

This approach allows simultaneous processing but introduces a fundamental rate-energy trade-off. As analyzed by Chao Shen et al. in Wireless Information and Energy Transfer in Multi-Antenna Interference Channel, allocating more power to energy storage directly degrades the signal-to-noise ratio (SNR) at the data decoder, and vice versa.

Despite this trade-off, Xiao Lu et al. demonstrate in Performance Analysis of Simultaneous Wireless Information and Power Transfer with Ambient RF Energy Harvesting that power splitting provides a highly flexible framework for optimizing real-time device operation based on current battery levels and channel conditions.

Component Separation (Optical/SLIPT)

When moving from radio frequencies to optical wireless communications (such as lasers or Visible Light Communication), signal partitioning can exploit the physical structure of light. An optical signal typically consists of a constant DC bias (used for illumination or to keep a laser stable) with a high-frequency AC signal superimposed on top to carry data.

In this domain, solar panels or specialized photovoltaic receivers act as dual-purpose front-ends. As detailed by Mohanad Obeed et al. in On Optimizing VLC Networks for Downlink Multi-User Transmission: A Survey, the receiver uses a shunt circuit to split the electrical current generated by the panel: the steady DC component is routed to power storage, while the fluctuating AC component is peeled off and sent to a transimpedance amplifier for data recovery. Mingliang Xiong et al. validated this mechanism in Resonant Beam Communications With Photovoltaic Receiver for Optical Data and Power Transfer, proving that a single light beam can safely deliver multi-gigabit data streams alongside several watts of usable power.

Network-Level Dynamics and Benefits

When signal partitioning is deployed across a network, it fundamentally changes how we manage interference, routing, and security.

Self-Powered Relaying

In cooperative wireless networks, distant nodes rely on intermediate relays to forward data. By equipping these relays with power-splitting hardware, they can operate entirely without an external power supply or battery.

Zhiguo Ding 0001 et al. explored this in Power Allocation Strategies in Energy Harvesting Wireless Cooperative Networks, showing that a relay can harvest enough energy from the source's incoming information signal to power its subsequent transmission phase. This creates a self-sustaining loop where the act of sending data provides the physical means to forward it.

Recycling Interference

In traditional wireless design, co-channel interference from neighboring transmitters is a destructive force that must be minimized. However, in a SWIPT-enabled network, interference becomes a valuable asset.

Because an energy harvesting circuit rectifies any incoming electromagnetic energy regardless of its source or phase, it can scavenge power from ambient noise and interfering signals. Caijun Zhong et al. demonstrate in Wireless Information and Power Transfer in Relay Systems with Multiple Antennas and Interference that with proper linear processing and multi-antenna beamforming, high-interference environments can actually boost network performance by providing a denser energy field for power-splitting receivers to harvest.

Enhancing Covert Communication

Signal partitioning also introduces unique security advantages. In adversarial environments, devices often need to communicate covertly to avoid detection by eavesdroppers.

Shaohan Feng et al. show in Achieving Covert Communication in Large-Scale SWIPT-Enabled D2D Networks that power-splitting architectures provide superior communication covertness compared to time-switching methods. Because power splitting allows a receiver to decode information using only a small fraction of the total signal power, the transmitter can operate at much lower, less detectable transmission power levels while still maintaining the receiver's energy balance through ambient scavenging.

Long-Range and Mobile Applications

The principles of integrated data and energy transfer extend naturally to high-mobility and long-range scenarios, such as keeping Unmanned Aerial Vehicles (UAVs) airborne indefinitely.

[ Ground Laser Station ] ───────► ( Free Space Optics Link ) ───────► [ Hovering UAV ]
                                  (Simultaneous Data & Power)                 │
                                                                              ├───► Photovoltaic Panel ──► Propulsion
                                                                              └───► Data Decoder ───────► RF Multicast

Using Free Space Optics (FSO), a ground-based laser can track a hovering UAV to provide both a high-bandwidth backhaul connection and the electrical power required for flight. Muhammad Salman Bashir models this optimization problem in Energy Optimization of a Laser-Powered Hovering-UAV Relay in Optical Wireless Backhaul, calculating how an optical power-splitting architecture must dynamically balance the incoming laser energy between the drone's flight rotors, its internal data decoding circuits, and its re-transmission hardware.

Similarly, Yue Ling et al. demonstrate in Energy-Efficient UAV Multicasting with Simultaneous FSO Backhaul and Power Transfer that optimizing this power-splitting ratio alongside the UAV's flight altitude allows a single laser link to sustain the drone's propulsion while it simultaneously multicasts data to ground users via radio frequencies.

By treating electromagnetic and optical waveforms as unified carriers of data and energy, signal partitioning bridges the gap between communication theory and power electronics, offering a clear path toward perpetual, battery-free networks.

Key Foundational Work

Power Allocation Strategies in Energy Harvesting Wireless Cooperative Networks (2013) — contributed 1 concept elements to this direction.
1P1-H09 Development of Force Sensor System using Passive RFID Tag for Structural Health Monitoring (2008) — contributed 1 concept elements to this direction.
History & citationVersion 1 · 2026-10-04

Current · Permanent link

View frozen version 1

Cite this direction

Latest version (a living page):

@misc{lacuna_simultaneous_wireless_information_and_po_95fb00b5,
  title = {simultaneous wireless information and power transfer},
  author = {{Lacuna}},
  howpublished = {Lacuna research direction},
  year = {2026},
  url = {https://lacuna.tiptreesystems.com/direction/simultaneous-wireless-information-and-power-transfer/rdr_95fb00b542b242569df8ff77171deb00},
  note = {Latest version of a living research direction; cite a version for a fixed text. Accessed 2026-11-21},
}

This exact version (version 1, frozen text):

@misc{lacuna_simultaneous_wireless_information_and_po_95fb00b5_v1,
  title = {simultaneous wireless information and power transfer},
  author = {{Lacuna}},
  howpublished = {Lacuna research direction},
  year = {2026},
  url = {https://lacuna.tiptreesystems.com/direction/simultaneous-wireless-information-and-power-transfer/rdr_95fb00b542b242569df8ff77171deb00/v/1},
  note = {Version 1, frozen 2026-10-04. Accessed 2026-11-21},
}
About

These directions overlap with this one through shared papers.

See something wrong? Report a mistake