In quantum materials, electrons behave not as isolated billiard balls, but as coherent waves. To understand a material's macroscopic properties—like superconductivity or topological insulation—physicists must map out the energy-momentum relationship of these electron waves, a landscape known as the electronic band structure.
Traditionally, mapping momentum space required knocking electrons out of the material using light (Angle-Resolved Photoemission Spectroscopy). However, a powerful alternative technique called Quasiparticle Interference (QPI) mapping allows researchers to reconstruct this momentum-space landscape entirely from the safety of real space, at the atomic scale.
The Pond Analogy: Scattering and Standing Waves
To understand why QPI works, imagine a smooth pond. If you throw a handful of pebbles into the water, ripples expand outward. If these ripples hit a row of wooden posts sticking out of the water, they bounce off and interfere with one another. The incoming waves and the scattered waves combine to form a intricate, stationary pattern of standing waves.
If you took a photograph of these standing waves, you could mathematically deduce the wavelength and speed of the water waves, as well as the positions of the posts.
QPI operates on the exact same principle:
- The Pond: The sea of mobile electrons (quasiparticles) inside a crystal lattice.
- The Posts: Atomic-scale surface defects, such as impurities, step edges, or grain boundaries.
- The Ripples: Spatial oscillations in the electron density caused by quantum interference between incoming and scattered electron waves.
By using a Scanning Tunneling Microscope (STM) to photograph these electronic ripples at the atomic scale, physicists can decode the fundamental quantum properties of the material.
From Tunneling Current to Local Density of States
Before we can analyze the ripples, we must first measure them. An STM operates by bringing an atomically sharp metallic tip incredibly close to a sample surface. When a voltage (bias) is applied, electrons quantum mechanically tunnel across the vacuum gap.
As theoretically demonstrated by Eun-Ah Kim et al., the tunneling rate between a clean probe and a two-dimensional electron system is directly proportional to the Local Density of States (LDOS) of the target layer at that specific location.
[ STM Tip ]
| <- Tunneling Current (I) modulated by Bias Voltage (V)
v
[ Standing Wave Ripples (LDOS) ] --> Measured as dI/dV
[ Crystal Surface with Defects ]
By measuring the differential conductance ($dI/dV$) across a grid of spatial coordinates, scanning tunneling spectroscopy (STS) effectively maps out how the LDOS changes from atom to atom (Xiaodong Zhou et al.; Liwei Liu et al.). To achieve extreme energy resolution, researchers can even use a superconducting tip, which leverages sharp superconducting energy gaps to filter the tunneling signal with sub-millielectronvolt precision (Zengyi Du et al.).
The Fourier Transform Trick: Translating Space to Momentum
A raw STM image shows a complex patchwork of interference ripples in real space ($\mathbf{r}$-space). To translate this into momentum space ($\mathbf{k}$-space), we rely on the physics of elastic scattering.
When an electron wave with an initial momentum vector $\mathbf{k}_i$ hits a defect, it scatters into a new state with momentum $\mathbf{k}_f$. Because the scattering is elastic, the electron's energy does not change, but its direction does. The interference between these two waves creates a standing wave pattern with a spatial wave vector $\mathbf{q}$, defined by the momentum transfer:
$$\mathbf{q} = \mathbf{k}_f - \mathbf{k}_i$$
By taking a two-dimensional spatial map of the $dI/dV$ ripples at a fixed energy $E$ and applying a Fourier Transform, we convert the spatial periodicities into sharp peaks in reciprocal space ($q$-space).
As Seoung‐Hun Kang et al. and Sean Howard et al. demonstrate, if you repeat this process across a sequence of varying bias voltages, you can track how these scattering vectors $\mathbf{q}$ expand, contract, or shift with energy. Guowei Liu highlights how this systematic tracking allows researchers to mathematically invert the $\mathbf{q}$-vectors and fully reconstruct the underlying electronic band structure ($E$ vs. $\mathbf{k}$).
Real-Space Map [dI/dV(r)] Fourier Transform Reciprocal Space Map [QPI(q)]
+-----------------+ +-----------------+
| (~) * (~) | | . |
| (~~~) (~~~) | =======> | . . |
| (~) * (~) | | . |
+-----------------+ +-----------------+
(Ripples around defects *) (Dominant scattering vectors q)
Unlocking Exotic Quantum States
QPI mapping is uniquely powerful because it does not just map simple bands; it reveals the internal quantum "textures" and symmetries of electrons that are invisible to other probes.
1. Visualizing Topological Protection and Fermi Arcs
In topological materials, spin-orbit coupling locks the electron's spin to its momentum. For instance, Hao Zheng et al. utilized QPI to image a Weyl semimetal surface, proving that certain expected scattering ripples were completely missing. Because electrons on opposite sides of the Fermi surface had opposite spins, scattering between them was quantum mechanically forbidden—direct real-space proof of topological protection.
Similarly, QPI imaging allows researchers to confirm the presence of topologically protected edge states within the energy gaps of Dirac semimetal films (Huinan Xia et al.) and map out segmented Fermi surfaces ("Fermi arcs") that persist even in superconducting states (Hanbin Deng et al.).
2. Detecting Broken Symmetries
Because QPI records how electrons scatter off native impurities, it serves as a highly sensitive probe for electronic phase transitions. Xi Liu et al. used QPI to observe electronic symmetry breaking in an iron-based superconductor, revealing a novel "diagonal" nematic order where the electron cloud breaks rotational symmetry at a 45-degree angle to the crystal lattice.
Furthermore, by treating natural structural defects like step edges as boundary sensors, researchers can detect subtle, localized phenomena like broken chiral symmetry (Glenn Wagner et al.) or hybrid topological states (Md Shafayat Hossain et al.).
Grounding Interference in Theory
Interpreting a complex QPI pattern can be challenging because multiple electronic bands can scatter simultaneously, creating a confusing web of overlapping ripples. To resolve this, experimentalists pair their observations with first-principles theoretical modeling.
By calculating the electronic structure using density functional theory, researchers generate simulated scanning tunneling microscopy maps (Miao Gao et al.). As demonstrated by Bingjing Zhang et al., comparing these simulated electronic clouds directly with experimental data allows physicists to confidently determine whether a newly discovered ripple pattern stems from a physical rearrangement of atoms, an underlying magnetic order, or exotic electron-electron interactions.
Key Foundational Work
Surface structures of ternary iron arsenides<mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML" display="inline"><mml:mrow><mml:mi>A</mml:mi><mml:msub><mml:mrow><mml:mtext>Fe</mml:mtext></mml:mrow><mml:mn>2</mml:mn></mml:msub><mml:msub><mml:mrow><mml:mtext>As</mml:mtext></mml:mrow><mml:mn>2</mml:mn></mml:msub></mml:mrow></mml:math>(<mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML" display="inline"><mml:mrow><mml:mi>A</mml:mi><mml:mo>=</mml:mo><mml:mtext>Ba</mml:mtext></mml:mrow></mml:math>, Sr, or Ca) (2010) — contributed 1 concept elements to this direction.
Visualizing nanoscale electronic band alignment at the<mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML" display="inline"><mml:mrow><mml:msub><mml:mrow><mml:mtext>La</mml:mtext></mml:mrow><mml:mrow><mml:mn>2</mml:mn><mml:mo>/</mml:mo><mml:mn>3</mml:mn></mml:mrow></mml:msub><mml:msub><mml:mrow><mml:mtext>Ca</mml:mtext></mml:mrow><mml:mrow><mml:mn>1</mml:mn><mml:mo>/</mml:mo><mml:mn>3</mml:mn></mml:mrow></mml:msub><mml:msub><mml:mrow><mml:mtext>MnO</mml:mtext></mml:mrow><mml:mn>3</mml:mn></mml:msub><mml:mo>/</mml:mo><mml:mtext>Nb</mml:mtext><mml:mo>:</mml:mo><mml:msub><mml:mrow><mml:mtext>SrTiO</mml:mtext></mml:mrow><mml:mn>3</mml:mn></mml:msub></mml:mrow></mml:math>interface (2010) — contributed 1 concept elements to this direction.
The nature of highly anisotropic free-electron-like states in a glycinate monolayer on Cu(100) (2008) — contributed 1 concept elements to this direction.