Visualizing nanoscale electronic band alignment at the<mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML" display="inline"><mml:mrow><mml:msub><mml:mrow><mml:mtext>La</mml:mtext></mml:mrow><mml:mrow><mml:mn>2</mml:mn><mml:mo>/</mml:mo><mml:mn>3</mml:mn></mml:mrow></mml:msub><mml:msub><mml:mrow><mml:mtext>Ca</mml:mtext></mml:mrow><mml:mrow><mml:mn>1</mml:mn><mml:mo>/</mml:mo><mml:mn>3</mml:mn></mml:mrow></mml:msub><mml:msub><mml:mrow><mml:mtext>MnO</mml:mtext></mml:mrow><mml:mn>3</mml:mn></mml:msub><mml:mo>/</mml:mo><mml:mtext>Nb</mml:mtext><mml:mo>:</mml:mo><mml:msub><mml:mrow><mml:mtext>SrTiO</mml:mtext></mml:mrow><mml:mn>3</mml:mn></mml:msub></mml:mrow></mml:math>interface

TeYu Chien, Jian Liu, J. Chakhalian, Nathan P. Guisinger, J. W. FreelandPhysical 2010 · DOI · arXiv

Introduction

Complex oxide heterostructures serve as essential platforms for modern condensed matter physics, hosting exotic electronic states such as interfacial superconductivity and high-mobility electron gases. These properties emerge from the unique interactions at the boundary between two materials. To understand and eventually manipulate these states, researchers must determine the electronic band alignment—specifically, how the allowed energy levels for electrons shift and bend across the interface.

However, measuring these properties at the nanoscale is a significant challenge. Most conventional characterization tools are non-local, providing an average over a large area rather than the high-resolution spatial data needed to see transitions at the atomic boundary. While Cross-sectional Scanning Tunneling Microscopy (XSTM) is the standard for semiconductor analysis, it is difficult to apply to perovskite oxides because these materials lack natural cleavage planes, making it nearly impossible to reveal a clean, flat internal surface for study.

Experimental Methodology

In this study, researchers successfully applied XSTM and Scanning Tunneling Spectroscopy (XSTS) to the interface of a 150 nm $La_{2/3}Ca_{1/3}MnO_3$ (LCMO) thin film grown on a Nb-doped $SrTiO_3$ (Nb:STO) substrate. To overcome the lack of cleavage planes, the team developed a controlled cross-sectional fracturing procedure. By using a precision saw to notch the substrate and applying steady force within an ultra-high vacuum environment, they triggered a conchoidal fracture. While not globally flat, this process produced local, atomically flat regions near the interface suitable for microscopy.

By measuring the tunneling current as a function of voltage (dI/dV curves), the researchers mapped the Local Density of States (LDOS). This allowed them to identify the Conduction Band Minimum (CBM) and Valence Band Maximum (VBM) point-by-point across the heterojunction.

Topographic and Mechanical Observations

Topographic STM images revealed distinct differences between the film and the substrate. The LCMO film appeared "rumpled" with a roughness of approximately 0.4 nm (roughly one unit cell), whereas the STO substrate remained smoother at 0.2 nm. This rumpling is attributed to strain relaxation. Because the LCMO film is grown under tensile strain from the substrate, the material relaxes into a slightly rougher state once the internal surface is exposed by the fracture.

Electronic Band Mapping and Insights

The spectroscopic data provided a direct visualization of the electronic transition across the interface:

  • Conduction Band Alignment: Surprisingly, the conduction bands of LCMO and Nb:STO were found to be almost perfectly aligned. This continuity suggests that the Fermi levels in both materials reside at nearly the same energy relative to their conduction band edges.
  • Valence Band Discontinuity: Unlike the conduction bands, the valence bands exhibited an abrupt shift. By mapping the LDOS at a negative bias (-2.5 V), the researchers created a high-contrast electronic map that clearly distinguished the film from the substrate based on their differing valence structures.
  • Sharp Interfacial Transition: The study found that any "band bending"—the gradual curving of energy levels due to charge transfer—is confined to a region narrower than 10 nm. This confirms that these complex oxide interfaces are electronically sharp on a very small scale, challenging previous macroscopic models that assumed more gradual transitions.

Conclusion and Future Directions

This research demonstrates that XSTM/S is a powerful tool for directly measuring the electronic properties of complex oxide interfaces. By successfully fracturing non-cleavable perovskites, the authors provided direct proof of conduction band alignment and identified the narrow spatial extent of electronic shifts.

While the current spatial resolution was somewhat limited by debris from the fracturing process adhering to the STM tip, future work will focus on refining surface preparation. Potential applications for this technique include the direct study of interfacial superconductivity, the mapping of local magnetic properties using spin-polarized tips, and real-time observation of band shifts under external electrical bias.

Summary updated

Abstract

Cross-sectional scanning tunneling microscopy and spectroscopy (XSTM/S) were used to map out the band alignment across the complex oxide interface of ${\text{La}}_{2/3}{\text{Ca}}_{1/3}{\text{MnO}}_{3}/\text{Nb}$-doped ${\text{SrTiO}}_{3}$. By a controlled cross-sectional fracturing procedure, unit-cell high steps persist near the interface between the thin film and the substrate in the noncleavable perovskite materials. The abrupt changes in the mechanical and electronic properties were visualized directly by XSTM/S. Using changes in the density of states as probe by STM, the electronic band alignment across the heterointerface was mapped out providing an approach to directly measure the electronic properties at complex oxide interfaces.
BibTeX
@inproceedings{chien2010visualizing,
  author = {TeYu Chien and Jian Liu and J. Chakhalian and Nathan P. Guisinger and J. W. Freeland},
  title = {{Visualizing nanoscale electronic band alignment at the<mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML" display="inline"><mml:mrow><mml:msub><mml:mrow><mml:mtext>La</mml:mtext></mml:mrow><mml:mrow><mml:mn>2</mml:mn><mml:mo>/</mml:mo><mml:mn>3</mml:mn></mml:mrow></mml:msub><mml:msub><mml:mrow><mml:mtext>Ca</mml:mtext></mml:mrow><mml:mrow><mml:mn>1</mml:mn><mml:mo>/</mml:mo><mml:mn>3</mml:mn></mml:mrow></mml:msub><mml:msub><mml:mrow><mml:mtext>MnO</mml:mtext></mml:mrow><mml:mn>3</mml:mn></mml:msub><mml:mo>/</mml:mo><mml:mtext>Nb</mml:mtext><mml:mo>:</mml:mo><mml:msub><mml:mrow><mml:mtext>SrTiO</mml:mtext></mml:mrow><mml:mn>3</mml:mn></mml:msub></mml:mrow></mml:math>interface}},
  booktitle = {Physical},
  year = {2010},
  doi = {10.1103/physrevb.82.041101},
}
Figure