Practical Successive Interference Cancellation for Resource Constrained Hardware

You are reading version 1 of this direction, frozen 2026-10-04. The latest version is version 2.

Version 1 of 2146 papers164 conceptsfrozen 2026-10-04

In the evolution toward 5G and 6G, wireless networks are moving away from Orthogonal Multiple Access (OMA)—where users are neatly separated into distinct time or frequency slots—toward Non-Orthogonal Multiple Access (NOMA). As Yonghui Li and Zhiguo Ding argue in Resource Management in Non-orthogonal Multiple Access Systems, this shift allows multiple users to share the same resource simultaneously, dramatically increasing spectral efficiency and connectivity density.

However, this theoretical leap comes with a steep "computational tax." To recover individual signals from a superimposed mess, receivers must use Successive Interference Cancellation (SIC). The core research direction across these 124 papers focuses on bridging the gap between the high theoretical capacity of non-orthogonal schemes and the severe hardware, energy, and latency constraints of real-world devices.

The Mechanism of Successive Interference Cancellation

The intuition behind SIC is "peeling the onion." In a NOMA system, a base station transmits a combined signal where different users are assigned different power levels based on their channel conditions.

  1. Decode the Strongest: The receiver first decodes the strongest signal (usually intended for the user with the worst channel).
  2. Subtract: It then subtracts this decoded signal from the total received waveform.
  3. Repeat: It repeats this process for the next strongest signal until it reaches its own data.

While elegant, this process is inherently sequential. As Mina Baghani and Saeedeh Parsaeefard note in Dynamic Non-Orthogonal Multiple Access (NOMA) and Orthogonal Multiple Access (OMA) in 5G Wireless Networks, the computational overhead of SIC can often outweigh the spectral gains, especially when users have high minimum rate requirements or strict latency bounds.

The Hardware Complexity Bottleneck

The primary barrier to deploying NOMA is that SIC is computationally expensive and sensitive to error propagation. If the first "layer" is decoded incorrectly, every subsequent layer is corrupted.

Strategies for Practical Implementation

To make non-orthogonal transmission viable, researchers are developing "hardware-aware" strategies that simplify the decoding process or offload the burden.

1. Joint Optimization and Clustering

Instead of forcing all users into a single NOMA pool, researchers use optimization to group users intelligently. Quoc-Viet Pham uses Harris Hawk Optimization to balance drone placement and user grouping, ensuring that the SIC complexity at each receiver remains manageable. Similarly, Erkai Chen and Meixia Tao propose joint base station clustering and beamforming to handle backhaul constraints in Joint Base Station Clustering and Beamforming.

2. Hybrid and Semi-NOMA Schemes

Recognizing that "pure" NOMA isn't always optimal, researchers like Xidong Mu have introduced Semi-NOMA. This approach splits data streams across shared and orthogonal bands, allowing the system to benefit from non-orthogonal gains without requiring every device to perform full-scale SIC (Heterogeneous Semantic and Bit Communications: A Semi-NOMA Scheme).

3. Dedicated Hardware and Low-Complexity Algorithms

The gap between theory and silicon is being closed by custom hardware. Florian Bucheli and Gian Marti demonstrated a 22nm ASIC capable of real-time multi-user MIMO interference cancellation, proving that nonlinear algorithms can be implemented at high data rates if the architecture is sufficiently specialized (A Jammer-Mitigating 267 Mb/s 3.78 mm2 583 mW 32⨉8 Multi-User MIMO Receiver).

Future Directions: RSMA and Integrated Sensing

The field is currently moving toward Rate-Splitting Multiple Access (RSMA). As Zhaohui Yang and Mingzhe Chen demonstrate, RSMA provides a more flexible framework than NOMA by splitting messages into common and private parts, which can achieve higher data rates with more robust interference management (Optimization of Rate Allocation and Power Control for RSMA).

Furthermore, researchers like Yuanwei Liu are applying SIC principles to Integrated Sensing and Communication (ISAC). By treating radar sensing signals as "virtual" communication layers that can be subtracted, 6G devices can sense their environment and communicate simultaneously without one service drowning out the other (NOMA Inspired Interference Cancellation for ISAC).

Papers in this version

Showing 60 of 146 papers.

History & citationVersion 2 · 2026-10-04

Current · Permanent link

  1. Version 2 (latest) · 2026-10-04 · 138 papers
  2. Version 1 · 2026-10-04 · 146 papers
Cite this direction

Latest version (a living page):

@misc{lacuna_interference_cancellation_overhead_1c7fead4,
  title = {interference cancellation overhead},
  author = {{Lacuna}},
  howpublished = {Lacuna research direction},
  year = {2026},
  url = {https://lacuna.tiptreesystems.com/direction/interference-cancellation-overhead/rdr_1c7fead4a6434be9af804df1793470ae},
  note = {Latest version of a living research direction; cite a version for a fixed text. Accessed 2026-11-19},
}

This exact version (version 1, frozen text):

@misc{lacuna_practical_successive_interference_cancel_1c7fead4_v1,
  title = {Practical Successive Interference Cancellation for Resource Constrained Hardware},
  author = {{Lacuna}},
  howpublished = {Lacuna research direction},
  year = {2026},
  url = {https://lacuna.tiptreesystems.com/direction/practical-successive-interference-cancellation-for-resource-constrained-hardware/rdr_1c7fead4a6434be9af804df1793470ae/v/1},
  note = {Version 1, frozen 2026-10-04. Accessed 2026-11-19},
}