In a traditional wireless network, a device's distance from a base station determines how much power it must expend to communicate. In a Wireless Powered Communication Network (WPCN), distance doesn't just increase the cost of communication—it simultaneously decreases the budget.
This phenomenon, widely termed the double near-far problem, creates a severe performance cliff for edge devices. Researchers are currently developing a suite of architectural and algorithmic solutions to bridge this gap, moving from simple resource scheduling to reconfigurable hardware that "follows" the user.
The Compounded Penalty of Distance
The intuition behind the double near-far problem is a matter of multiplication. In a WPCN, a device must first harvest energy from a Radio Frequency (RF) signal sent by a Power Station (PS) before it can transmit its own data.
As Xiao Lu, Dusit Niyato, and colleagues explain in Wireless Networks with RF Energy Harvesting: A Contemporary Survey, a distant node suffers twice:
- Downlink Depletion: It receives a significantly weaker charging signal due to path loss.
- Uplink Obstruction: It requires higher transmission power to overcome that same path loss when sending data back.
If path loss follows a squared distance relationship ($d^2$), the effective throughput of a wirelessly powered device scales roughly with $1/d^4$. This "compounded disadvantage," as noted by Mohammad Gharbieh and Hesham ElSawy in Grant-Free Opportunistic Uplink Transmission in Wireless-powered IoT, makes it nearly impossible for edge devices to maintain connectivity without intervention.
Balancing the Scales through Resource Allocation
The first line of defense against this unfairness is joint optimization of time and power. In a "harvest-then-transmit" protocol, the network must decide how much time to allocate to charging versus communication.
Fang Wei Li and Haibo Zhang demonstrate in Research on wireless Powered Communication Networks Sum Rate Maximization based on time Reversal OFDM that by treating multipath interference as a tool rather than a nuisance—using Time Reversal (TR) techniques—networks can focus energy more efficiently.
To ensure fairness, researchers like Dongyeong Song and Jungwoo Lee propose algorithms that maximize total throughput only after meeting minimum Quality of Service (QoS) guarantees for the weakest nodes (Sum-Throughput Maximization With QoS Constraints for Cooperative WPCNs). Similarly, Hang Yu and Yiwei Li argue that Medium Access Control (MAC) protocols must incorporate proportional fairness to prevent distant nodes from being permanently excluded from the channel (Channel Access Methods for RF-Powered IoT Networks: A Survey).
Spatial Solutions: RIS and Beamforming
When software optimization isn't enough, researchers turn to spatial manipulation. The goal is to "bend" the wireless environment to favor the disadvantaged.
- Intelligent Surfaces: Guangyu Zhu and Xidong Mu explore the use of STAR-RIS (Simultaneously Transmitting and Reflecting Reconfigurable Intelligent Surfaces). These surfaces can reflect energy toward one user while transmitting it through to another, effectively "erasing" the distance penalty by creating high-gain paths for edge users (Enhancing User Fairness in Wireless Powered Communication Networks with STAR-RIS).
- Massive MIMO: Yong Zeng 0001 and Rui Zhang 0006 propose retrodirective beamforming. In this setup, devices send "beacons" that allow the base station to focus energy precisely where it is needed. To solve the near-far problem, they suggest an iterative approach where near-field devices intentionally reduce their beacon strength, forcing the system to redistribute its beamforming focus toward distant receivers (Retrodirective Multi-User Wireless Power Transfer with Massive MIMO).
Moving the Hardware: Pinching Antenna Systems
Perhaps the most radical approach to the double near-far problem is the Pinching Antenna System (PAS). If the user cannot move closer to the antenna, the antenna moves closer to the user.
In work by Yixuan Li, Ming Zeng, and Yuanwei Liu, antennas move along dielectric waveguides to maintain a constant line-of-sight (LoS) with IoT devices (Sum Rate Maximization for Wireless Powered Pinching-Antenna Systems). By mechanically reconfiguring the antenna's position, the system can bypass the probabilistic blockages and extreme path loss that typically kill high-frequency signals (Spatially Adaptive SWIPT with Pinching Antenna under Probabilistic LoS Blockage).
As Kunrui Cao and George K. Karagiannidis analyze in Performance Analysis of Wireless-Powered Pinching Antenna Systems, this technology effectively trades internal waveguide loss for free-space path loss, providing a more stable energy and data link for spatially distributed sensors.
Cooperative Energy Recycling
Finally, some researchers suggest that devices should help each other. Haohao Qin and Dong Li introduce Cooperative Energy Recycling (CER), where IoT devices harvest energy not just from the base station, but also from the ambient radio signals of their peers (Fairness-Aware Computation Offloading in Wireless-Powered MEC Systems with Cooperative Energy Recycling). This creates a community-based energy ecosystem that prevents edge devices from falling into "localized service failures" due to their distance from the primary source.