Internet of MIMO Things: UAV-Assisted Wireless-Powered Networks for Future Smart Cities

Oktay Cetinkaya, Domenico Balsamo, Geoff V. MerrettIEEE Internet Things Mag 2020 · DOI

Abstract

The expansion of the Internet of Things (IoT) in smart cities faces a significant "battery wall," where manual maintenance of millions of sensor batteries is unsustainable. This paper proposes the Internet of MIMO Things (IoMIMO), a self-sufficient network architecture that integrates Hybrid Access Points (HAPs) and Unmanned Aerial Vehicles (UAVs) to coordinate energy and data delivery. By utilizing MIMO-based energy beamforming and Simultaneous Wireless Information and Power Transfer (SWIPT), the framework aims to create a perpetual IoT ecosystem.

Introduction: The Battery Wall

Traditional IoT deployments are limited by energy constraints. Relying solely on ambient Energy Harvesting (EH) is often insufficient for high-duty-cycle devices, while the "doubly-near-far" problem exacerbates energy depletion for nodes distant from base stations. The IoMIMO framework addresses these bottlenecks by treating energy and data as a single, coordinated resource.

The IoMIMO Framework

The architecture relies on specialized components to ensure continuous operation:

  • Hybrid Access Points (HAPs): These serve as the network backbone, combining energy providers and data gateways. They utilize MIMO technology for "energy beamforming," focusing wireless power on specific devices.
  • UAVs as Mobile Relays: UAVs act as mobile energy couriers and data gateways, reaching "darkened" areas where fixed infrastructure is unavailable.
  • SWIPT: This technique allows the simultaneous transmission of data and energy on the same radio waveform, maximizing spectral and energy efficiency.
Network scenario illustrating energy and data flows between HAPs, UAVs, and various sensor nodes.

Device Taxonomy and Operational Modes

The paper classifies seven device types, ranging from passive backscattering sensors to active EH-powered nodes. These devices interact through five distinct operation modes, as detailed in the operations matrix below:

  1. WPT: Wireless Power Transfer.
  2. SWIPT: Simultaneous Wireless Information and Power Transfer.
  3. w-pComm: Wireless-powered communication.
  4. Inverse w-pComm: Data transmission from a gateway to a powered node.
  5. wComm: Standard wireless communication.
Operations Matrix defining compatibility between device types and network operation modes.

Results and Applications

The theoretical evaluation demonstrates that the IoMIMO architecture can support diverse smart city applications, such as agricultural monitoring and air quality sensing, by providing a "perpetual" operation model. The use of UAVs significantly reduces the need for complex multi-hop routing, lowering the overall network energy overhead.

Conclusion

While the IoMIMO framework offers a promising path toward battery-free smart cities, future work must address 3D channel modeling in urban environments, UAV flight path optimization, and regulatory limits on wireless power transfer.

Summary updated

BibTeX
@article{cetinkaya2020internet,
  author = {Oktay Cetinkaya and Domenico Balsamo and Geoff V. Merrett},
  title = {{Internet of MIMO Things: UAV-Assisted Wireless-Powered Networks for Future Smart Cities}},
  journal = {IEEE Internet Things Mag.},
  year = {2020},
  doi = {10.1109/iotm.0001.1900064},
}
Figure