In the pursuit of 6G speeds, wireless communication is moving toward the Terahertz (THz) band and extremely large antenna arrays. However, as bandwidth increases, a fundamental physical assumption of radio engineering begins to break down. This phenomenon, known as beam squint (or the beam split effect), causes a signal’s physical direction to shift depending on its frequency. In wideband systems, a beam intended for a single receiver can "smear" across space like a rainbow, leading to massive signal loss.
The Mismatch Between Phase and Time
To understand why beams squint, we must look at how antennas steer signals. In a traditional phased array, we steer a beam by introducing a specific phase shift at each antenna element. The goal is to ensure that the electromagnetic waves from all antennas arrive at the receiver in perfect sync (constructive interference).
The mathematical catch is that the phase shift ($\Delta \phi$) required to steer a beam in a specific direction depends on the frequency ($f$) and the time delay ($\tau$): $$\Delta \phi = 2\pi f \tau$$
Standard hardware uses analog phase shifters, which apply a constant phase shift across the entire signal. This works perfectly for narrowband signals where the frequency range is small. But in wideband systems, the signal contains a broad range of frequencies. If the phase shift $\Delta \phi$ is fixed, the resulting time delay $\tau$ must vary inversely with the frequency.
As Linglong Dai and Jingbo Tan demonstrate in Delay-Phase Precoding for Wideband THz Massive MIMO, this creates a "THz rainbow." The center frequency might point directly at the user, but the upper and lower edges of the signal bandwidth will squint toward different spatial directions. In ultra-massive MIMO systems, this misalignment can result in an array gain loss of over 80%, effectively severing the high-speed link.
From Steering to Focusing: The Near-Field Challenge
The problem becomes even more complex as we move into the near-field. In traditional far-field communications, we treat radio waves as flat planes (planar waves) and focus only on the angle of transmission. In the near-field—a region that expands significantly as antenna arrays grow larger—waves are spherical. This allows for beamfocusing, where the signal is targeted at a specific 3D coordinate rather than just a direction.
Researchers like Yuanwei Liu and Zhaolin Wang have shown that beam squint in the near-field doesn't just shift the angle; it shifts the focal point in 3D space. In Near-Field Communications: What Will Be Different?, they explain that different frequency components of a signal will focus at different distances and angles. Without compensation, the "spotlight" of the beam becomes a blurry streak, failing to concentrate energy on the intended receiver.
Hardware Solutions: True-Time Delayers
The most direct way to solve beam squint is to replace or augment phase shifters with True-Time Delayers (TTDs). Unlike phase shifters, TTDs provide a constant time delay regardless of frequency. This naturally satisfies the $\Delta \phi = 2\pi f \tau$ relationship, ensuring that all frequency components align in the same spatial direction.
However, TTDs are hardware-intensive. To make them practical, researchers are developing hybrid architectures. In TTD Configurations for Near-Field Beamforming: Parallel, Serial, or Hybrid?, Zhaolin Wang proposes serial and hybrid TTD designs that significantly reduce the required maximum delay, making it possible to implement these systems with existing technology. Other approaches, such as Delay-Phase Precoding (DPP), use a small number of TTDs to "pre-steer" groups of antennas, creating frequency-dependent beams that counteract the squint effect.
Algorithmic and Structural Innovations
Beyond hardware, the research community is exploring how to manage beam squint through signal processing and novel antenna structures:
- Intelligent Surfaces: Technologies like Stacked Intelligent Metasurfaces (SIM) and Reconfigurable Intelligent Surfaces (RIS) are being designed to perform wave-domain processing. As noted by Chao Xu in Stacked Intelligent Metasurface-Aided MIMO Transceiver Design, these surfaces must be carefully optimized to maintain stable links across wide bandwidths.
- Movable Antennas: A novel approach proposed by Yanze Zhu and Qingqing Wu involves physically moving antenna elements. By dynamically adjusting the geometry of the array, the system can maximize signal gain across the entire spectrum, as detailed in Suppressing Beam Squint Effect For Near-Field Wideband Communication Through Movable Antennas.
- Deep Learning: Traditional channel estimation fails when beams squint because the "spatial signature" of the channel changes with frequency. Caijun Zhong and colleagues developed SBLNet, a deep learning framework that uses convolutional layers to capture correlations across the angular and frequency domains, effectively "learning" to compensate for squint during signal processing.
Turning a Bug into a Feature
Interestingly, some researchers are looking to exploit beam squint rather than just suppress it. In Integrated Location Sensing and Communication for Ultra-Massive MIMO With Hybrid-Field Beam-Squint Effect, Zhen Gao and Xingyu Zhou demonstrate that the frequency-dependent nature of squinted beams can actually provide more information for localization. Because each frequency "sees" the environment from a slightly different perspective, the beam squint effect can be used to achieve sub-decimeter sensing accuracy, turning a major source of distortion into a powerful tool for 6G sensing.