Jerk Limited Trajectory Generation for Autonomous Systems

This direction is split into other directions: polynomial trajectory generation. Its last version stays readable and citable here.

Version 1 of 1161 papers197 conceptsfrozen 2026-10-04

In robotics, the shortest path between two points is rarely a straight line. While a line is geometrically optimal, it is physically violent. Moving a robotic actuator or a vehicle along a path with sharp corners requires instantaneous changes in velocity and acceleration—demanding infinite force and causing mechanical vibrations, wear, and instability.

To achieve fluid, "human-like" motion, researchers focus on higher-order trajectory optimization. By constraining and minimizing derivatives like jerk (the rate of change of acceleration) and snap (the rate of change of jerk), we can generate paths that are not only smooth but also respect the underlying physics of the machine.

The Necessity of Continuity

Early robotics relied on simple point-to-point movements. However, as Richard A. Lewis and Antal K. Bejczy observed in Planning Considerations for a Roving Robot with Arm, using high-degree polynomials to define these paths often led to "mathematical artifacts" like wandering or overshoot.

The solution was to enforce $C^2$ continuity—ensuring that position, velocity, and acceleration remain continuous throughout the movement. Richard Paul demonstrated in Trajectory Control of a Computer Arm that third-degree (cubic) polynomials could eliminate sudden mechanical jerks, allowing a 6-DOF arm to move with a grace that "independent joint" control could not achieve.

Minimum Jerk and Biological Plausibility

Why do we specifically target "jerk"? The intuition comes from how humans move. In A Computational Mechanism to Account for Averaged Modified Hand Trajectories, Ealan A. Henis and Tamar Flash argued that the human brain optimizes for a minimum-jerk profile. By minimizing the third derivative of position, the motor system ensures kinematic smoothness, which is essential for both biological efficiency and robotic safety.

In modern applications, this principle is used to bridge the gap between high-level planning and low-level execution:

  • Surgical Precision: Minho Hwang and colleagues used jerk-minimized trajectories in Superhuman Surgical Peg Transfer to achieve speeds that outperform expert surgeons while maintaining the stability required for delicate tasks.
  • Human Interaction: In rehabilitation robotics, Jiajun Xu showed that minimum-jerk models reduce mechanical jerk during real-time path adjustments, making physical interaction more comfortable and safer for patients (A rehabilitation robot control framework).

Beyond Jerk: Minimum Snap for Aerial Flight

For quadrotors, jerk is not enough. Because the orientation of a drone is coupled with its acceleration, the motors essentially control the fourth derivative of position, known as snap.

In Airways: Optimization-Based Planning of Quadrotor Trajectories, Tobias Nägeli and Otmar Hilliges formulated trajectory generation as an optimization problem that minimizes snap. This ensures that the resulting flight paths are physically feasible for the drone's motors to track at high speeds. This approach is now standard in agile flight; for instance, Elia Kaufmann and Davide Scaramuzza used similar trajectory generators to enable Deep Drone Racing, allowing autonomous drones to navigate complex gates without exceeding their physical limits.

Mathematical Mechanisms for Smoothness

To generate these trajectories, researchers typically use one of three mathematical frameworks:

  1. Higher-Order Polynomials: Quintic (5th-order) polynomials are frequently used because they provide enough degrees of freedom to specify position, velocity, and acceleration at both the start and end of a segment. This is seen in high-precision tasks like SARS-CoV-2 diagnostic robotics and autonomous vehicle testing.
  2. S-Curve Convolution: A computationally elegant method involves the successive convolution of rectangular pulses. By iteratively applying a convolution operator to a constant velocity command, a system can automatically generate "S-curve" profiles that strictly respect acceleration and jerk limits.
  3. Quadratic Programming (QP): For complex environments with obstacles, trajectory generation is often framed as a QP problem. This allows the system to minimize jerk or snap as the primary objective while treating physical limits (velocity, acceleration) and obstacle avoidance as hard constraints. Balakumar Sundaralingam and Adam Fishman recently demonstrated that these optimizations can be parallelized on GPUs via cuRobo, generating collision-free, minimum-jerk paths in under 50 milliseconds.

The Impact of Smoothness

Prioritizing higher-order derivatives transforms how robots operate. As noted by Ben M. Chen, jerk-limited generation replaces inefficient "stop-and-go" navigation with continuous, fluid motion (Complex system and intelligent control). Whether it is suppressing vibrations in high-speed machining or ensuring the steady flux of a piston pump, the goal remains the same: aligning the mathematical path with the physical reality of the machine.

Papers in this version

Showing 60 of 161 papers.

History & citationVersion 1 · 2026-10-04

Split into other directions · Permanent link

View frozen version 1

Cite this direction

Latest version (a living page):

@misc{lacuna_jerk_limited_trajectory_generation_for_a_547f6080,
  title = {Jerk Limited Trajectory Generation for Autonomous Systems},
  author = {{Lacuna}},
  howpublished = {Lacuna research direction},
  year = {2026},
  url = {https://lacuna.tiptreesystems.com/direction/jerk-limited-trajectory-generation-for-autonomous-systems/rdr_547f6080ad124990b3fac0d998473a57},
  note = {Latest version of a living research direction; cite a version for a fixed text. Accessed 2026-11-21},
}

This exact version (version 1, frozen text):

@misc{lacuna_jerk_limited_trajectory_generation_for_a_547f6080_v1,
  title = {Jerk Limited Trajectory Generation for Autonomous Systems},
  author = {{Lacuna}},
  howpublished = {Lacuna research direction},
  year = {2026},
  url = {https://lacuna.tiptreesystems.com/direction/jerk-limited-trajectory-generation-for-autonomous-systems/rdr_547f6080ad124990b3fac0d998473a57/v/1},
  note = {Version 1, frozen 2026-10-04. Accessed 2026-11-21},
}