The 25% Internal Quantum Efficiency Bottleneck
In conventional organic light-emitting diodes (OLEDs), standard fluorescent emitters face a fundamental statistical limitation during electrical excitation. When holes and electrons recombine to form excitons, they are generated in a 1:3 ratio of singlets to triplets. As explained by Zhaoning Li et al. in 1,3,4-Oxadiazole-based Deep Blue Thermally Activated Delayed Fluorescence Emitters for Organic Light Emitting Diodes and David Wheeler et al. in Carbazole-substituted benzobisoxazoles: near-UV fluorescent emitters and ambipolar hosts for organic light-emitting diodes, standard fluorescent materials can only harvest the 25% of excitons that form in the singlet state to emit light.
The remaining 75% of excitons form non-radiative triplet states. Because transitions from these triplet states are spin-forbidden, they cannot naturally be converted into light and are instead wasted as non-radiative heat (Robert Pollice et al. in Ultrafast Computational Screening of Molecules with Inverted Singlet–Triplet Energy Gaps Using the Pariser–Parr–Pople Semiempirical Quantum Chemistry Method; Iryna Danyliv et al. in Effects of the nature of donor substituents on the photophysical and electroluminescence properties of derivatives of perfluorobiphenyl: donor–acceptor versus donor–acceptor–donor type AIEE/TADF emitters). Overcoming this 25% internal quantum efficiency (IQE) cap is the primary challenge for designing high-efficiency organic electronics without relying on expensive heavy-metal phosphors (Xianhao Lv et al. in Highly efficient non-doped blue fluorescent OLEDs with low efficiency roll-off based on hybridized local and charge transfer excited state emitters).
Blending Two Excited States: The HLCT Mechanism
To bypass this statistical limit, researchers utilize a molecular design strategy called the Hybridized Local and Charge Transfer (HLCT) state. The core intuition behind an HLCT state is to integrate two distinct excited-state characters into a single, dual-character molecular architecture:
- Locally Excited (LE) state character: This component provides high radiative transition rates and narrow emission spectra, which are essential for maintaining color purity (Xianhao Lv et al. in Highly efficient non-doped blue fluorescent OLEDs with low efficiency roll-off based on hybridized local and charge transfer excited state emitters).
- Charge Transfer (CT) state character: This component facilitates the harvesting and conversion of non-radiative triplet excitons (Tengyue Li et al. in Highly efficient white organic light-emitting diodes based on balanced bipolar-transporting blue hybridized local charge transfer fluorophores).
As Runze Wang et al. demonstrate in Highly efficient pure organic near-ultraviolet (NUV) electro-fluorescent materials with high electron mobility and improved hole mobility, this hybridization overcomes the traditional trade-off between the high efficiency of charge transfer states and the narrow emission spectra of local excitation states. By combining these properties, HLCT emitters achieve high exciton utilization while maintaining the narrow emission spectra required for high-definition display standards.
Triplet Harvesting via the Hot Exciton Channel
How does the HLCT state convert non-radiative triplets into harvestable light? The mechanism operates through a process known as high-lying reverse intersystem crossing (RISC), or a "hot exciton" channel.
Instead of attempting to convert triplets from the lowest-energy triplet state ($T_1$), the dual-character HLCT state opens up a pathway from upper-level, high-energy triplet states directly to singlet states (Xianhao Lv et al. in Highly efficient non-doped blue fluorescent OLEDs with low efficiency roll-off based on hybridized local and charge transfer excited state emitters). As described by Yuanji Ye et al. in Color-Tunable Hot-Exciton Organic Glassy Supramolecular Scintillators Enabled by Host-Guest Co-Melting, this hot-exciton pathway allows for the simultaneous harvesting of both singlet and triplet excitons through high-lying energy levels. By converting non-radiative triplet states into radiative singlet states via this high-lying RISC channel, the internal quantum efficiency of fluorescent materials can significantly exceed the traditional 25% limit (Tengyue Li et al. in Highly efficient white organic light-emitting diodes based on balanced bipolar-transporting blue hybridized local charge transfer fluorophores; Tengyue Li et al. in Highly efficient and negligible efficiency roll-off non-doped blue electroluminescence with a synergistic effect of fast-balanced carrier transport and appropriate hybridized excited states).
High Efficiency and Low Roll-Off in Devices
The practical value of the HLCT mechanism lies in its ability to deliver high efficiency without compromising device stability or color purity at high brightness.
For example, Xianhao Lv et al. developed a blue-emitting molecule, TPAAnPI, that leverages the HLCT excited state to build non-doped blue OLEDs. The device achieved an external quantum efficiency (EQE) of 11.47% alongside remarkably low efficiency roll-off at high brightness. Similarly, Tengyue Li et al. in Highly efficient and negligible efficiency roll-off non-doped blue electroluminescence with a synergistic effect of fast-balanced carrier transport and appropriate hybridized excited states showed that tuning molecular bonding sites optimizes the excited state characteristics and carrier transport, yielding an EQE of 11.7% in non-doped blue devices with zero efficiency roll-off at high brightness.
The mechanism has also been successfully applied to multi-color systems. In Highly efficient white organic light-emitting diodes based on balanced bipolar-transporting blue hybridized local charge transfer fluorophores, the authors utilized a blue HLCT fluorophore (TPACFOXZ) to construct a hybrid white OLED, achieving a maximum EQE of 27.1% with low efficiency roll-off. By combining high radiative transition rates with efficient high-lying triplet conversion, the HLCT framework provides a robust solution to the efficiency limitations of organic fluorescent materials.
Key Foundational Work
Highly efficient non-doped blue fluorescent OLEDs with low efficiency roll-off based on hybridized local and charge transfer excited state emitters (2020) — contributed 5 concept elements to this direction.
1,3,4-Oxadiazole-based Deep Blue Thermally Activated Delayed Fluorescence Emitters for Organic Light Emitting Diodes (2019) — contributed 1 concept elements to this direction.