Highly efficient non-doped blue fluorescent OLEDs with low efficiency roll-off based on hybridized local and charge transfer excited state emitters

Xianhao Lv, Mizhen Sun, Lei Xu, Runzhe Wang, Huayi Zhou, Yuyu Pan, Shitong Zhang, Qikun Sun, Shanfeng Xue, Wenjun YangChemical 2020 · DOI

Abstract

Designing a donor-acceptor (D-A) molecule with a hybridized local and charge transfer (HLCT) excited state is a very effective strategy for producing an organic light-emitting diode (OLED) with a high exciton utilization efficiency and external quantum efficiency. Herein, a novel twisting D-π-A fluorescent molecule (triphenylamine-anthracene-phenanthroimidazole; TPAAnPI) is designed and synthesized. The excited state properties of the TPAAnPI investigated through photophysical experiments and density functional theory (DFT) analysis reveal that its fluorescence is due to the HLCT excited state. The optimized non-doped blue OLED using TPAAnPI as a light-emitting layer exhibits a novel blue emission with an electroluminescence (EL) peak at 470 nm, corresponding to the Commission International de L'Eclairage (CIE) coordinates of (0.15, 0.22). A fabricated device termed Device II exhibits a maximum current efficiency of 18.09 cd A⁻¹, power efficiency of 12.35 lm W⁻¹, luminescence of ≈29 900 cd cm⁻², and external quantum efficiency (EQE) of 11.47%, corresponding to a high exciton utilization efficiency of 91%. Its EQE remains as high as 9.70% at a luminescence of 1000 cd m⁻² with a low efficiency roll-off of 15%. These results are among the best for HLCT blue-emitting materials involved in non-doped blue fluorescent OLEDs. The performance of Device II highlights a great industrial application potential for the TPAAnPI molecule.

Introduction

Organic Light-Emitting Diodes (OLEDs) have revolutionized display technology, yet achieving high-performance blue emission remains a significant hurdle. While red and green emitters have achieved near-theoretical efficiency limits, blue materials often suffer from wide intrinsic band gaps, leading to high charge injection barriers and unbalanced carrier transport. Conventional high-efficiency solutions, such as phosphorescent OLEDs or Thermally Activated Delayed Fluorescence (TADF) materials, typically require "doping"—dispersing the emitter into a host matrix—to prevent quenching. This increases manufacturing complexity and cost. Furthermore, these devices often experience "efficiency roll-off," where performance degrades significantly at higher brightness levels.

This paper addresses these challenges by introducing TPAAnPI, a novel blue-emitting molecule designed with a "hybridized local and charge transfer" (HLCT) excited state. This design allows for highly efficient, non-doped blue OLEDs that maintain performance even at high current densities.

Synthesis and Molecular Design

The researchers synthesized a donor–$\pi$–acceptor (D–$\pi$–A) molecule, TPAAnPI, which incorporates triphenylamine (TPA) as the donor, an anthracene core as the conjugated bridge, and phenanthroimidazole (PI) as the acceptor.

Synthesis scheme of the TPAAnPI molecule.

The synthesis was carried out via Suzuki coupling reactions. The resulting molecule features a twisted geometry, specifically at the 9,10-substitution on the anthracene core. This structural twisting is a critical design choice for non-doped devices, as it prevents molecules from packing too closely in solid films, thereby avoiding "aggregation-caused quenching" (ACQ). Thermal characterization showed the material to be exceptionally robust, with a decomposition temperature ($T_d$) of 492 °C and a glass-transition temperature ($T_g$) of 213 °C, ensuring stability during industrial vacuum deposition processes.

Photophysical Properties and the HLCT Mechanism

The core innovation of TPAAnPI lies in its HLCT excited state. This state effectively merges the characteristics of a Locally Excited (LE) state—which provides high radiative rates and pure color—with a Charge Transfer (CT) state, which facilitates the conversion of non-emissive triplet excitons into emissive singlets.

Transient photoluminescence decay curves in different solvents.

To confirm the HLCT nature, the team performed solvatochromic experiments, observing how emission properties shifted in solvents of varying polarity. Transient photoluminescence decay curves (shown above) provided further insight into the excited state dynamics. Computational analysis using Density Functional Theory (DFT) identified a high-lying triplet-to-singlet conversion channel ($T_{12} \rightarrow S_3$), which explains how the material achieves an Exciton Utilization Efficiency (EUE) of 91%, far exceeding the 25% limit of traditional fluorescent materials.

Device Performance and Results

The researchers fabricated multi-layer OLEDs using vacuum deposition. An optimized configuration, designated as Device II, demonstrated remarkable performance for a non-doped blue fluorescent OLED:

  • External Quantum Efficiency (EQE): Reached a maximum of 11.47%.
  • Efficiency Roll-off: Maintained an EQE of 9.70% at 1000 cd m⁻², representing a low roll-off of only 15%.
  • Luminance: Achieved a high maximum brightness of approximately 29,900 cd cm⁻².
  • Color Purity: Produced a stable blue emission with a peak at 470 nm and CIE coordinates of (0.15, 0.22).

These metrics place TPAAnPI among the top-performing HLCT blue-emitting materials reported to date for non-doped applications.

Conclusion and Future Outlook

The development of TPAAnPI demonstrates that the HLCT strategy is a powerful tool for creating high-efficiency, low-roll-off blue OLEDs without the need for complex doping processes. While the current CIE y-coordinate of 0.22 is slightly higher than the "deep blue" required for some ultra-high-definition standards, future molecular tuning could shift the emission toward shorter wavelengths. Additionally, while the efficiency results are promising, future studies on long-term operational stability will be essential for commercial adoption. Nevertheless, the high EUE and low roll-off highlight the significant industrial potential of this molecular design.

Summary updated

Abstract

Designing a donor-acceptor (D-A) molecule with a hybridized local and charge transfer (HLCT) excited state is a very effective strategy for producing an organic light-emitting diode (OLED) with a high exciton utilization efficiency and external quantum efficiency. Herein, a novel twisting D-π-A fluorescent molecule (triphenylamine-anthracene-phenanthroimidazole; TPAAnPI) is designed and synthesized. The excited state properties of the TPAAnPI investigated through photophysical experiments and density functional theory (DFT) analysis reveal that its fluorescence is due to the HLCT excited state. The optimized non-doped blue OLED using TPAAnPI as a light-emitting layer exhibits a novel blue emission with an electroluminescence (EL) peak at 470 nm, corresponding to the Commission International de L'Eclairage (CIE) coordinates of (0.15, 0.22). A fabricated device termed Device II exhibits a maximum current efficiency of 18.09 cd A<sup>-1</sup>, power efficiency of 12.35 lm W<sup>-1</sup>, luminescence of ≈29 900 cd cm<sup>-2</sup>, and external quantum efficiency (EQE) of 11.47%, corresponding to a high exciton utilization efficiency of 91%. Its EQE remains as high as 9.70% at a luminescence of 1000 cd m<sup>-2</sup> with a low efficiency roll-off of 15%. These results are among the best for HLCT blue-emitting materials involved in non-doped blue fluorescent OLEDs. The performance of Device II highlights a great industrial application potential for the TPAAnPI molecule.
BibTeX
@inproceedings{lv2020highly,
  author = {Xianhao Lv and Mizhen Sun and Lei Xu and Runzhe Wang and Huayi Zhou and Yuyu Pan and Shitong Zhang and Qikun Sun and Shanfeng Xue and Wenjun Yang},
  title = {{Highly efficient non-doped blue fluorescent OLEDs with low efficiency roll-off based on hybridized local and charge transfer excited state emitters}},
  booktitle = {Chemical},
  year = {2020},
  doi = {10.1039/d0sc01341b},
}
Figure