Carbazole-substituted benzobisoxazoles: near-UV fluorescent emitters and ambipolar hosts for organic light-emitting diodes

David Wheeler, Lloyd Fisher, Pascal Friederich, Chris Cunningham, Angelar K. Muthike, Alán Aspuru‐Guzik, Theodore Goodson, Malika Jeffries‐ELJournal of Materials Chemistry C 2022 · DOI

Abstract

The design of organic light emitting diode (OLED) materials with the potential for exhibiting thermally-activated delayed fluorescence (TADF) is reported.

Introduction

Developing efficient organic light-emitting diodes (OLEDs) that emit in the deep-blue or near-UV spectrum remains a significant challenge in materials science. Traditional purely organic fluorescent emitters are typically limited to an internal quantum efficiency (IQE) of 25% because they can only harvest "singlet" excitons, while the remaining 75% ("triplets") are lost as heat.

To reach 100% efficiency, researchers aim to design materials that exhibit Thermally Activated Delayed Fluorescence (TADF), which allows triplet excitons to convert back into light-emitting singlets. However, designing these molecules is a "Goldilocks" problem: one must spatially separate the electron-rich (donor) and electron-poor (acceptor) parts of the molecule to minimize the energy gap between states ($\Delta E_{ST}$), but separating them too much often reduces the molecule's overall brightness.

Methodology

The research team employed a "theory-to-bench" approach, starting with computational modeling. Using Density Functional Theory (DFT), they designed six donor-acceptor-donor (DAD) architectures based on the benzobisoxazole (BBO) core. They varied the BBO core isomer (cis vs. trans) and the attachment points of the carbazole "pendants" (meta vs. para positions) to predict electronic properties.

Molecular design showing the 4,8-axis and 2,6-axis substitution patterns on the benzobisoxazole core.

Following design, the team developed a scalable, three-step synthetic route (SNAr, boronic ester formation, and Suzuki-Miyaura coupling) that is highly practical as it does not require strictly inert atmospheres. The resulting materials (C1–C6) were characterized using advanced spectroscopy and tested in solution-processed OLED devices both as light-emitting dopants and as hosts.

Key Insights: Conjugation and Ambipolarity

A critical finding was the trade-off between conjugation and brightness. The researchers found that meta-conjugation successfully isolated the molecular orbitals—a prerequisite for TADF—but it also suppressed the overall photoluminescence quantum yield (PLQY). Conversely, para-conjugation boosted brightness but increased the energy gap, favoring standard fluorescence.

Calculated HOMO and LUMO energy levels and spatial distributions for compounds C1–C6.

The BBO core is naturally electron-deficient (acceptor), while carbazole is electron-rich (donor). Combining them creates "ambipolar" materials that can transport both holes and electrons effectively. As shown in the orbital distributions, this balance makes them exceptional host materials for balancing charge flow within a device. Furthermore, small changes in the BBO core (switching from cis to trans) significantly impacted the LUMO levels, providing a powerful knob for tuning electronic performance.

Experimental Results

While the materials functioned as high-efficiency fluorescent emitters rather than the intended TADF materials, they demonstrated exceptional performance in several metrics:

  • Near-UV Purity: As emitters, the compounds produced sharp near-UV light with excellent color coordinates ($CIE_y < 0.06$), critical for high-definition display standards.
  • Outperforming Industry Standards: When used as hosts for other emitters, the BBO-based materials achieved lower operating voltages and higher efficiencies than the industry-standard host, mCP. For example, host C4 achieved a maximum EQE of 0.864% in a preliminary setup, significantly better than the mCP control (0.049%).
  • High Brightness: Solution-state PLQY reached as high as 68%, demonstrating that these are robust emitters even without the TADF effect.

Conclusion and Future Work

The primary limitation was that despite computational predictions, the materials remained primarily fluorescent in experimental testing. The authors attribute this to competitive rates of different decay pathways. Future work will focus on optimizing these materials for thermal evaporation to improve film quality and exploring their use as "sensitizers" in hyperfluorescence systems to bypass the 25% efficiency limit of standard fluorescence.

Summary updated

Abstract

The design of organic light emitting diode (OLED) materials with the potential for exhibiting thermally-activated delayed fluorescence (TADF) is reported.
BibTeX
@article{wheeler2022carbazole,
  author = {David Wheeler and Lloyd Fisher and Pascal Friederich and Chris Cunningham and Angelar K. Muthike and Alán Aspuru‐Guzik and Theodore Goodson and Malika Jeffries‐EL},
  title = {{Carbazole-substituted benzobisoxazoles: near-UV fluorescent emitters and ambipolar hosts for organic light-emitting diodes}},
  journal = {Journal of Materials Chemistry C},
  year = {2022},
  doi = {10.1039/d2tc03190f},
}
Figure