Voltage controlled iontronic switches: a computational method to predict electrowetting in hydrophobically gated nanopores

Gonçalo Paulo, Alberto Gubbiotti, Giovanni Di Muccio, Alberto Giacomello

This paper, recently published by researchers at Sapienza Università di Roma, provides a theoretical and computational roadmap for designing the next generation of "iontronic" devices—electronic systems that use ions instead of electrons to process information, much like the human brain.

TL;DR

The authors developed a predictive framework using Molecular Dynamics to show how external voltage controls the "wetting" of hydrophobic nanopores. By treating these pores as voltage-gated switches that flip between conductive (wet) and non-conductive (dry) states, they demonstrate a path toward creating artificial memristors for neuromorphic computing.

What Problem Does This Paper Address?

Biological ion channels are the ultimate signal processors, but they are incredibly difficult to replicate artificially. They rely on complex protein movements and allosteric regulation that are hard to engineer into synthetic materials.

A simpler alternative is hydrophobic gating. In a very small, water-repelling (hydrophobic) pore, a tiny vapor bubble can spontaneously form, blocking the flow of ions—effectively turning the switch "off." While we know that voltage can force water into these pores (a process called electrowetting), we haven't had a precise theoretical way to predict the energy required for this transition across different voltages without running massive, computationally expensive simulations for every single scenario.

Methods

The researchers combined high-level physics with atomistic simulations:

  1. Restrained Molecular Dynamics (RMD): They simulated a 1.4 nm wide cylindrical pore and used RMD to "force" the pore to contain a specific number of water molecules ($N$). This allowed them to map the free energy landscape—the "effort" required to move from a dry state to a wet state.
  2. Statistical Mechanics Framework: They derived a second-order Taylor expansion to describe how free energy changes with voltage ($\Phi$). This involved two key coefficients:
  3. $P_1$: Related to the average dipole moment of water in the pore.
  4. $P_2$: Related to the fluctuations of that dipole (essentially the "capacitance" of the pore).
  5. Phenomenological Modeling: To make the model more practical, they developed an analytical formula (a sigmoid function) that describes how these coefficients change as the pore fills up, allowing them to predict the behavior of the pore at any voltage.

Datasets

The study relies on custom-generated atomistic simulation data rather than external datasets.

  • System: A cylindrical nanopore (1.4 nm diameter, 2.8 nm length) carved into a Lennard-Jones solid.
  • Fluid: SPC/E water model.
  • Conditions: 310 K (body temperature) and 1 atm of pressure, controlled via virtual pistons.

Key Insights and Ideas

  • The Capacitance Analogy: The researchers found that the pore behaves like a microscopic capacitor. Because water has a high dielectric constant and vapor has a low one, the energy stored in the system changes dramatically as the pore wets. This "dielectric contrast" is what drives the gating.
  • Symmetry and Squaring: In a symmetric, uncharged pore, the first-order effect ($P_1$) is negligible at zero voltage. This means the probability of the pore wetting depends primarily on the square of the voltage, making the switch "polarity-blind" in its simplest form.
  • Gating Inversion: The most striking insight is the "inversion" of stability. At 0V, the pore is naturally dry (off). At high voltages (~1.5V), the landscape flips, and the pore becomes naturally wet (on).
  • Predictive Efficiency: Instead of simulating dozens of voltages, researchers can now calculate coefficients at just one or two points and accurately reconstruct the entire energy landscape for a wide range of voltages.

Key Results

  • Non-linear Scaling: Voltage has a massive, non-linear impact on stability. Applying 0.5V barely nudges the energy barrier ($<5 k_BT$), but 1.5V crashes it by over $30 k_BT$, making wetting inevitable.
  • Massive Rate Swings: The transition rates between "on" and "off" states can span 12 orders of magnitude. At 0V, the pore dries in the GHz range (nanoseconds) but stays dry for seconds. At 1.5V, the behavior completely reverses.
  • Accuracy: Their analytical model (Eq. 24) predicted free energy profiles with an error of less than $2 k_BT$, which is remarkably close to the "ground truth" of full molecular simulations.

Limitations and Future Work

  • Pure Water vs. Electrolytes: The current study used pure water. In real-world iontronics, the presence of ions (salt) will add another layer of complexity to the electrowetting physics.
  • Geometry Specificity: The phenomenological formula used to fit the data is currently specific to this pore's shape and size. The authors acknowledge it isn't yet "dimensionally coherent" or universal.
  • Equilibrium Assumption: The theory assumes the system is at equilibrium. Future work will need to account for the "active" state where ions are actively flowing through the pore, creating a steady-state current.

This work moves us closer to "neuromorphic iontronics"—building computers that don't just mimic the brain's logic, but actually use the same fluidic physics to think.

Summary updated

Abstract

Reliable and controllable switches are crucial in nanofluidics and iontronics.Ion channels found in nature serve as a rich source of inspiration due to their intricate mechanisms modulated by stimuli like pressure, temperature, chemical species, and voltage.The artificial replication of the properties of these channels is challenging due to their complex chemistry, limited stability range, and intricate moving parts, allosterically modulated.Nonetheless, we can harness some of the gating mechanisms of ion channels for nanofluidic and iontronic purposes.This theoretical and computational study explores the use of electrowetting in simple hydrophobic nanopores to control their conductance using an external applied voltage.We employ restrained molecular dynamics to calculate the free energy required for wetting a model nanopore under different voltages.Utilizing a simple theory, we generate free energy profiles across a wide voltage range.We also computed transition rates between conductive and non-conductive states, showing their voltage dependence and how this behavior can impair memory to the system, resembling the memristor behavior voltage-gated channels in the brain.The proposed framework provides a promising avenue for designing and controlling hydrophobic nanopores via electrowetting, enabling potential applications in neuromorphic iontronics.
BibTeX
@article{paulo2024voltage,
  author = {Gonçalo Paulo and Alberto Gubbiotti and Giovanni Di Muccio and Alberto Giacomello},
  title = {{Voltage controlled iontronic switches: a computational method to predict electrowetting in hydrophobically gated nanopores}},
  journal = {International Journal of Smart and Nano Materials},
  year = {2024},
  doi = {10.1080/19475411.2023.2300332},
}
Figure