Thermally Drawn Bioelectric Catheters: Enabling Proprioceptive Endovascular Navigation

Alex Ranne, Heiko Maier, Jinshi Zhao, Songli Moey, Ayhan Aktas, Manik Chana, Burak Temelkuran, Nassir Navab, Ferdinando Rodriguez y BaenaarXiv 2025 · DOI · arXiv

Abstract

To navigate medical instruments safely and accurately inside a patient's vascular tree, combining X-ray fluoroscopy with intermittent contrast injections is the gold standard. However, prolonged exposure to ionizing radiation poses health risks, necessitates the use of cumbersome lead vests for the clinicians, and contrast injections can lead to acute kidney injury in patients. Bioelectric Navigation, a non-fluoroscopic tracking modality, aims to provide an alternative. It uses weak electric currents to detect local anatomical features in the vasculature and localize instruments without x-ray imaging. In this work, we advance Bioelectric Navigation on two frontiers. Firstly, we introduce a new class of bespokely designed electrode catheters. They are fabricated using 3D printing, thermal drawing, and laser micro-machining. Specifically, we manufacture a 6 Fr catheter incorporating 16 electrodes, a guidewire channel and an additional sensor compartment. We thoroughly assess the catheter's mechanical and electrical properties. Secondly, we introduce an algorithm to localize the catheter along the centerline of a vascular phantom, for the first time fusing electric detection of vascular geometry with electric distance estimation. We report both tracking accuracy and usability evaluated by an expert endovascular surgeon, demonstrating the strong potential of this technology for integration into the existing clinical workflow.

Introduction: Moving Beyond Fluoroscopy

Minimally invasive endovascular surgery (MIES) is the standard of care for treating complex vascular conditions such as abdominal aortic aneurysms. However, the current "gold standard" for navigation—X-ray fluoroscopy combined with contrast dye injections—presents significant clinical challenges. Cumulative ionizing radiation exposure poses long-term cancer risks for both patients and surgical teams, while nephrotoxic contrast agents can lead to acute kidney injury. Furthermore, X-rays only visualize the instruments clearly; the vessels themselves remain invisible without intermittent dye "snapshots."

Bioelectric Navigation (BN) offers a promising alternative by using weak electric currents to "feel" the vessel geometry. This work introduces a new class of bespoke electrode catheters and a robust localization algorithm, moving BN closer to clinical reality.

Hardware Innovation: The Thermal Drawing Pipeline

Traditional catheter manufacturing often struggles to integrate high-density electronics into small-diameter tubes. The researchers addressed this by adapting thermal drawing, a technique typically used in fiber optics.

The process begins with a 3D-printed preform (approximately 4 cm in diameter) that defines the catheter's complex internal architecture, including 16 wire channels and a central lumen. This preform is then heated and stretched in a drawing tower, reducing its diameter to a 6 French (2 mm) fiber while perfectly preserving the internal geometry. A single 17 cm preform can yield over 20 meters of catheter body.

The manufacturing and navigation pipeline: (A-B) Clinical application and sensing principle; (C-D) 3D printing the preform; (E) Thermal drawing process; (F) Final catheter cross-section and microscope image.

Following the draw, laser micromachining is used to expose the internal copper wires at specific intervals. Platinum ring electrodes are then laser-spot-welded to these points, creating a high-density sensing array.

Proprioceptive Navigation and the devDTW Algorithm

The core of this technology is "proprioceptive" navigation. As the catheter moves through the vasculature, the impedance measured between its electrodes changes in inverse proportion to the vessel's cross-sectional area.

Sensing Principle: The catheter generates an electric field; changes in local impedance allow the system to "feel" anatomical features like aneurysms.

To translate these raw signals into precise locations, the team developed the deviation-based Dynamic Time Warping (devDTW) algorithm. This software fuses geometric sensing with distance estimation. Unlike standard matching algorithms, devDTW compares live signals against a database of simulated trajectories that account for "off-center" catheter paths. A key innovation is the use of "anchor regions"—areas with high signal variance, such as the neck of an aneurysm—to stabilize tracking in otherwise "flat" signal zones.

Results and Clinical Feasibility

The system was validated using both simple geometric phantoms and anatomically realistic silicon models of abdominal aortic aneurysms. Key findings include:

  • Tracking Accuracy: The system achieved a real-time tracking accuracy of 8.3 mm RMS error.
  • Surgical Precision: In trials with an experienced endovascular surgeon, the use of "anchor-based" navigation allowed for target accuracy of 3 mm RMS when navigating to the renal arteries.
  • Reduced Cognitive Load: NASA-TLX surveys indicated that the refined devDTW algorithm significantly reduced the effort and frustration experienced by the surgeon compared to baseline methods.

Conclusion

By combining advanced fiber fabrication techniques with intelligent signal processing, this work demonstrates a viable path toward radiation-free endovascular navigation. The ability to mass-produce complex, multi-electrode catheters through thermal drawing, paired with the robust devDTW algorithm, provides a foundation for safer, more precise minimally invasive surgeries. Future work will focus on automating the assembly process and validating the system in live tissue environments.

Summary updated

Abstract

To navigate medical instruments safely and accurately inside a patient's vascular tree, combining X-ray fluoroscopy with intermittent contrast injections is the gold standard. However, prolonged exposure to ionizing radiation poses health risks, necessitates the use of cumbersome lead vests for the clinicians, and contrast injections can lead to acute kidney injury in patients. Bioelectric Navigation, a non-fluoroscopic tracking modality, aims to provide an alternative. It uses weak electric currents to detect local anatomical features in the vasculature and localize instruments without x-ray imaging. In this work, we advance Bioelectric Navigation on two frontiers. Firstly, we introduce a new class of bespokely designed electrode catheters. They are fabricated using 3D printing, thermal drawing, and laser micro-machining. Specifically, we manufacture a 6 Fr catheter incorporating 16 electrodes, a guidewire channel and an additional sensor compartment. We thoroughly assess the catheter's mechanical and electrical properties. Secondly, we introduce an algorithm to localize the catheter along the centerline of a vascular phantom, for the first time fusing electric detection of vascular geometry with electric distance estimation. We report both tracking accuracy and usability evaluated by an expert endovascular surgeon, demonstrating the strong potential of this technology for integration into the existing clinical workflow.
BibTeX
@misc{ranne2025thermally,
  author = {Alex Ranne and Heiko Maier and Jinshi Zhao and Songli Moey and Ayhan Aktas and Manik Chana and Burak Temelkuran and Nassir Navab and Ferdinando Rodriguez y Baena},
  title = {{Thermally Drawn Bioelectric Catheters: Enabling Proprioceptive Endovascular Navigation}},
  year = {2025},
  eprint = {2504.19326},
  archivePrefix = {arXiv},
  url = {https://arxiv.org/abs/2504.19326},
  howpublished = {arXiv},
}
Figure