Abstract
This study evaluates a novel semi-metallic gasket designed for high-pressure and high-temperature maritime engine piping. The gasket utilizes a 1.6mm thick wing-shaped stainless steel body integrated with expanded graphite seals. Performance was validated through Finite Element Analysis (FEA) under extreme conditions (600°C, 35 MPa). Results indicate that the design maintains a contact pressure exceeding internal fluid pressure, ensuring effective leakage prevention while offering significant manufacturing and installation advantages over traditional spiral-wound gaskets.
Introduction
Static seals in ship engine piping must maintain integrity under severe thermal and mechanical stress. Traditional spiral-wound gaskets, while effective, are thick (3.2mm) and costly to produce. This paper presents a thinner, 1.6mm semi-metallic alternative that simplifies manufacturing through press forming and improves installation via a unique wing-shaped geometry.
Design Innovation
The proposed gasket features a wing-shaped body that allows for universal fitment across various flange diameters. This design also provides a physical handle for technicians, reducing the risk of misalignment during manual installation in confined engine room spaces.
Methodology
The research combined experimental material characterization with numerical simulation. Tensile tests on expanded graphite sheets established the mechanical properties required for accurate modeling. A 3D assembly of the flange, gasket, and bolts was analyzed using Ansys Workbench 13.0 to simulate real-world operating conditions.
Thermal-structural coupling was employed to simulate heat transfer from 600°C internal fluids and the resulting thermal stresses. Structural analysis incorporated an internal pressure of 35 MPa and a bolt preload of 33,600N to assess deformation and sealing effectiveness.
Results and Discussion
Thermal simulations revealed a stable temperature gradient, with the gasket reaching near-fluid temperatures while the outer flange dissipated heat to the environment. Structural results confirmed that the contact pressure at the graphite seal interface remained consistently above the 35 MPa internal pressure, satisfying the fundamental requirement for leak prevention. The assembly demonstrated high structural integrity, with no components reaching yield points under the combined thermal and mechanical loads.
Conclusion
The 1.6mm semi-metallic gasket with graphite seals provides a robust and cost-effective solution for maritime piping. Its optimized geometry ensures a reliable seal under extreme conditions while simplifying the installation process, making it a viable alternative to standard industrial gaskets.
Summary updated