Abstract: This paper presents an efficient use of telecom-based photonics technologies in terahertz communications systems, which include high-speed wireless communications in 300-GHz and 600-GHz bands. System concepts, key devices and system demonstrations are described.
Introduction
As the industry moves toward "Beyond 5G" and 6G standards, the demand for wireless data rates is skyrocketing toward 100 Gbit/s and even 1 Tbit/s. Traditional electronic components based on microwaves and millimeter waves struggle at these speeds due to limited bandwidth and high signal loss.
The "Terahertz Gap" (roughly 100 GHz to 10 THz) offers massive untapped bandwidth, but generating and modulating these ultra-high-frequency waves using pure electronics is extremely difficult. Photonics-assisted systems bridge this gap by leveraging the inherent wide bandwidth of light to drive wireless communication.
Photonics-Assisted System Architecture
The core of the proposed system architecture uses light as the primary medium for signal generation and processing. A key technique is photomixing, where two laser beams with slightly different wavelengths (λ₁, λ₂) are mixed in a high-speed photodiode. The resulting "beat frequency" between these wavelengths corresponds to the desired THz frequency.
By simply changing the wavelength of one laser, the wireless carrier frequency can be shifted across hundreds of gigahertz, providing unparalleled frequency tuning ease compared to electronic oscillators. This flexibility allows researchers to target specific atmospheric "windows" of low attenuation, such as those around 300 GHz and 600 GHz.
Key Devices: The UTC-PD
The "heart" of the transmitter is the Uni-Traveling-Carrier Photodiode (UTC-PD). This specialized device converts the optical beat signal into a THz wireless wave with high efficiency and output power. On the receiving end, technologies like Resonant Tunneling Diodes (RTD) provide high-sensitivity, compact detection at room temperature.
For higher frequency bands like 600 GHz, novel heterodyne receivers are used to convert the received THz signal back into the optical domain. This allows for high-precision optical filtering to remove noise that electronic filters cannot handle, such as suppressing carrier leakage that might interfere with the baseband signal.
Experimental Results and Demonstrations
The research, published in Laser Review (May 2022), demonstrated significant milestones in THz communication performance:
- Ultra-High Speeds: Transmission speeds of 64 Gbit/s were achieved using QPSK modulation in the 300 GHz band, with 100 Gbit/s feasible using 16QAM.
- 8K Video Streaming: The system successfully transmitted uncompressed 8K-UHD video at a total rate of 48 Gbit/s (using two 24 Gbit/s channels).
- Mobile Integration: In a practical test, a THz transmitter was mounted on a small drone, transmitting high-definition video to a ground station.
- Wide Bandwidth: In the 600 GHz band, the system achieved a fractional bandwidth exceeding 50%, covering a 340 GHz wide operating range.
Limitations and Future Outlook
While photonics enables high-speed links, several hurdles remain for widespread consumer adoption. Most current demonstrations are point-to-point; future systems will require beamforming and beam-steering to maintain connections with moving devices. Additionally, THz waves are sensitive to atmospheric moisture and rain, which limits their effective range. Finally, shrinking complex optical setups (lasers, amplifiers) into mass-producible, low-cost chips is the next major engineering challenge.
Summary updated