Photonic Pre-Coding for MIMO System in Satellite-Terrestrial Communication

Tao Lin, Haiyang Yu, Shanghong Zhao, Jian Guo Liu, Kun Zhang, Wei Jiang, Guodong Wang, He Li, Xuan LiIEEE Access 2020 · DOI

Introduction

As global demand for high-speed data continues to surge, satellite communication systems are evolving to support 5G and 6G networks. To meet these requirements, researchers are looking toward higher frequency bands, such as the Ka-band (~30 GHz), which offer significantly more bandwidth than traditional lower-frequency allocations. To further maximize spectral efficiency, Multiple-Input Multiple-Output (MIMO) technology is employed, allowing for the simultaneous transmission of multiple data streams.

However, satellite-to-ground links face unique challenges. The Earth's atmosphere introduces significant distortion, including turbulence and scintillation, which can severely degrade signal quality. Traditionally, these issues are addressed using Digital Signal Processing (DSP) at the receiver or transmitter.

Overcoming the Electronic Bottleneck

While electronic DSP is effective at lower frequencies, it becomes a major bottleneck as data rates climb into the multi-gigabit range. High-speed electronic circuits are power-hungry, generate substantial heat, and struggle to process the massive bandwidths required for Ka-band MIMO systems.

To address this, researchers have proposed a paradigm shift: performing signal pre-coding directly in the optical domain. By using light to "do the math," the system can bypass the speed and power limitations of traditional electronics. This approach implements the Zero Force (ZF) algorithm—a technique that "pre-distorts" the signal to counteract the predicted atmospheric interference—using photonic components.

Proposed Photonic Architecture

The core of the innovation lies in an all-optical pre-coding structure that physically maps mathematical operations onto the properties of light.

Schematic of the proposed all-optical pre-coding MIMO system.

As shown in the architecture above, the system begins with a Laser Diode (LD) providing the optical carrier. The signal is split and processed through several key stages:

  • DP-BPSK Modulator: A dual-polarization binary phase-shift keying modulator prepares the microwave signals in the optical domain.
  • Polarization Modulator (PolM): This component is used to precisely align and manipulate the phases of the optical signals.
  • Pre-coding Section: This is the "optical computer" of the system. It utilizes Optical Time Delays (OTDs), optical attenuators, and polarization beam splitters/combiners (PBS/PBC) to represent the coefficients of the inverse channel matrix ($H^{-1}$).

By adjusting these physical parameters, the system ensures that the signal leaving the satellite is intentionally "mangled." When this signal passes through the atmosphere, the natural distortion effectively "un-mangles" it, resulting in a clean, high-fidelity signal at the ground station.

Performance and Results

The proposed system was validated using rigorous mathematical channel models (including ITU-R and Karasawa models) and verified through Optisystem simulations of a 2x2 MIMO link at 30 GHz.

Key performance metrics include:

  • Reliability: The system achieved a Bit Error Rate (BER) of approximately $2.13 \times 10^{-7}$, significantly better than the $10^{-6}$ threshold typically required for robust satellite links.
  • High Throughput: The simulation demonstrated successful data transmission at rates up to 7 Gbit/s per channel.
  • Frequency Agility: Unlike rigid electronic circuits, the photonic architecture is inherently wideband. It demonstrated stable performance across a range from 30 GHz to 38 GHz with minimal adjustments.

Visual analysis of eye diagrams at the receiver confirmed the effectiveness of the pre-coding, showing clear, open "eyes" despite the simulated atmospheric turbulence.

Conclusion and Future Outlook

Photonic pre-coding offers a promising path toward ultra-high-speed, energy-efficient satellite communications. By shifting the computational burden from power-hungry electronics to high-speed optical components, this technology can unlock the full potential of the Ka-band and beyond.

Future research will focus on improving the system's resilience to severe weather conditions, such as heavy rain, and exploring adaptive photonic structures that can dynamically respond to changing atmospheric states. Additionally, scaling the architecture to support massive MIMO configurations remains a key engineering challenge for next-generation satellite payloads.

Summary updated

BibTeX
@article{lin2020photonic,
  author = {Tao Lin and Haiyang Yu and Shanghong Zhao and Jian Guo Liu and Kun Zhang and Wei Jiang and Guodong Wang and He Li and Xuan Li},
  title = {{Photonic Pre-Coding for MIMO System in Satellite-Terrestrial Communication}},
  journal = {IEEE Access},
  year = {2020},
  doi = {10.1109/access.2020.2976871},
}
Figure