Storage and Caching: Synthesis of Flow-based Microfluidic Biochips
Lists
Only you see this
Abstract
Flow-based microfluidic biochips are widely used in lab- on-a-chip experiments. In these chips, devices such as mixers and detectors connected by micro-channels execute specific operations. Intermediate fluid samples are saved in storage temporarily until target devices become avail- able. However, if the storage unit does not have enough capacity, fluid samples must wait in devices, reducing their efficiency and thus increasing the overall execution time. Consequently, storage and caching of fluid samples in such microfluidic chips must be considered during synthesis to balance execution efficiency and chip area.
BibTeX
@inproceedings{tseng2015storage,
author = {Tsun-Ming Tseng and Bing Li and Tsung-Yi Ho and Ulf Schlichtmann},
title = {{Storage and Caching: Synthesis of Flow-based Microfluidic Biochips}},
booktitle = {IEEE Des. Test},
year = {2015},
doi = {10.1109/mdat.2015.2492473},
}| Transport or Store? Synthesizing Flow-based Microfluidic Biochips using Distributed Channel Storage | arXiv · 2017 |
| Reliability-Aware Synthesis With Dynamic Device Mapping and Fluid Routing for Flow-Based Microfluidic Biochips | IEEE TCAD · 2016 |
| Columba 2.0: A Co-Layout Synthesis Tool for Continuous-Flow Microfluidic Biochips | IEEE TCAD · 2018 |
| Design Automation for Digital Microfluidic Biochips | Ipsj Trans. Syst. LSI Des. Methodol · 2014 |
| Mixer-Based Washing Methods for Programmable Microfluidic Devices | IEICE Trans. Fundam. Electron. Commun. Comput. Sci · 2022 |
| Automated Routing of Droplets for DNA Storage on a Digital Microfluidics Platform | arXiv · 2022 |