Abstract
Non-orthogonal multiple access (NOMA) and millimeter wave (mmWave) are two key enabling technologies for the fifth-generation (5G) mobile networks and beyond. In this paper, we consider mmWave NOMA systems with max-min fairness constraints. Existing beamforming designs aiming at maximizing spectrum efficiency (SE) are often unsuitable for NOMA systems prioritizing fairness. Furthermore, previous work mostly depends on full knowledge of instantaneous channel state information (ICSI), which is difficult to obtain accurately in mmWave systems. To address this, we propose a heuristic hybrid beamforming design based on a statistical CSI (SCSI) user grouping strategy. Simulation results show that our proposed algorithms outperform previous methods in terms of user fairness.
Introduction
As 5G-Advanced and 6G networks evolve, the integration of Millimeter Wave (mmWave) and Non-Orthogonal Multiple Access (NOMA) becomes essential. mmWave provides massive bandwidth, while NOMA allows multiple users to share resources simultaneously. However, this combination faces two significant hurdles: the high overhead of tracking fast-fading Instantaneous CSI (ICSI) and the "Fairness Gap," where sum-rate maximization often leaves weak users with zero resources. This paper introduces a framework that prioritizes "max-min fairness"—ensuring the users with the worst connections receive reliable service—by leveraging long-term Statistical CSI (SCSI).
System Architecture and Methodology
The proposed solution utilizes a three-stage approach based on stable, long-term channel statistics rather than volatile instantaneous data.
User Grouping and Analog Beamforming
Users are grouped using a modified Agglomerative Nesting (AGNES) clustering algorithm based on Correlation Matrix Distance (CMD). This groups users whose channels share similar spatial directions. For the analog stage, we propose Statistical Analog Beamforming (SAB). Instead of pointing a narrow beam at a single cluster head, SAB uses the average covariance of the entire group to create a wider beam that covers all users within a cluster, providing a baseline gain for subsequent power allocation.
Digital Beamforming and Power Allocation
To suppress inter-cluster interference, two digital beamforming designs are explored: a standard Zero Forcing (ZF) approach and an extended Signal-to-Leakage-plus-Noise Ratio (SLNR) metric. The SLNR approach is particularly effective as it balances maximizing a group's signal while minimizing interference leaked to other groups. Finally, to solve the non-convex max-min power allocation problem, we apply a Quadratic Transform (QT) and a bisection search method to find optimal power levels efficiently.
Performance Evaluation
The framework was evaluated using Monte Carlo simulations with a Base Station equipped with 64 antennas and 4 RF chains. The channel model incorporated 6 multipath components per user, with users randomly distributed across a 180-degree sector.
As shown in the figure above, the proposed SCSI-based algorithms (specifically AGNES+SAB+SLNR) significantly outperform "cluster-head" designs and K-means approaches. By designing the analog beam to represent the cluster average, the system maintains a higher minimum data rate even at lower power levels.
Furthermore, the stability of the system is evident when increasing the number of users (K). While all methods see a decrease in per-user rate as the system becomes more crowded, the proposed SCSI-based methods maintain a more consistent and higher minimum rate compared to traditional ICSI-based methods, proving their robustness in overloaded scenarios.
Conclusion
This research demonstrates that long-term statistical CSI is a viable and efficient alternative to ICSI for high-performance mmWave NOMA. While the iterative power allocation adds some computational complexity, the reduction in feedback overhead and the significant gains in user fairness make it a compelling strategy for future networks. Future work will address the challenges of high-mobility environments and hardware quantization errors in hybrid beamforming architectures.
Summary updated