Abstract
We consider the stability of transonic contact discontinuity for the two-dimensional steady compressible Euler flows in a finitely long nozzle. This is the first work on the mixed-type problem of transonic flows across a contact discontinuity as a free boundary in nozzles. We start with the Euler-Lagrangian transformation to straighten the contact discontinuity in the new coordinates. However, the upper nozzle wall in the subsonic region depending on the mass flux becomes a free boundary after the transformation. Then we develop new ideas and techniques to solve the free-boundary problem in three steps: (1) we fix the free boundary and generate a new iteration scheme to solve the corresponding fixed boundary value problem of the hyperbolic-elliptic mixed type by building some powerful estimates for both the first-order hyperbolic equation and a second-order nonlinear elliptic equation in a Lipschitz domain; (2) we update the new free boundary by constructing a mapping that has a fixed point; (3) we establish via the inverse Lagrangian coordinates transformation that the original free interface problem admits a unique piecewise smooth transonic solution near the background state, which consists of a smooth subsonic flow and a smooth supersonic flow with a contact discontinuity.
Introduction: The Transonic Challenge
In fluid dynamics, a "contact discontinuity" is an interface where fluid properties like density and temperature jump abruptly, while pressure and velocity remain continuous. When this interface exists in a "transonic" state—separating a layer of subsonic flow from a layer of supersonic flow—the mathematical complexity increases significantly. Subsonic flows are governed by elliptic equations, where information travels in all directions, while supersonic flows are governed by hyperbolic equations, where information travels along specific characteristic paths.
Prior to this work, the stability of a transonic contact discontinuity as a free boundary in a nozzle remained an open question. The authors aim to prove that if a steady, uniform background flow (as shown in Figure 1) is slightly perturbed, the resulting interface between the subsonic and supersonic layers remains stable and predictable.
Methodology: Tackling the Free Boundary
The core of the problem lies in the fact that the location of the interface is unknown and must be solved as part of the flow—a "free boundary" problem. The authors employ a three-step mathematical strategy:
- Euler-Lagrangian Transformation: They use a coordinate shift to "straighten" the wiggly contact discontinuity into a fixed line. This transformation, however, turns the upper nozzle wall into a free boundary in the new coordinates.
- Fixed-Boundary Iteration: By first fixing this new boundary, they solve the resulting mixed hyperbolic-elliptic PDE. They use Riemann invariants to diagonalize the supersonic equations and stream functions to reduce the subsonic equations to a nonlinear second-order elliptic form.
- Fixed-Point Mapping: Finally, they update the boundary's position based on mass flux, proving that this iterative process converges to a unique fixed point.
As illustrated in Figure 2, the perturbed state involves complex geometries for both the nozzle walls ($\Gamma_+, \Gamma_-$) and the internal contact discontinuity ($\Gamma_{cd}$).
Key Insights and Results
A critical insight of this research is characteristic coupling: the contact discontinuity acts as a characteristic from the supersonic side, meaning the supersonic flow's behavior is intrinsically tied to the shape of the interface, which is itself determined by the subsonic flow's pressure.
Major Findings:
- Existence and Uniqueness: For any given transonic incoming flow that is a small perturbation of a uniform state, there exists a unique, piecewise smooth solution.
- Structural Stability: The solution consists of a smooth subsonic flow and a smooth supersonic flow separated by a stable contact discontinuity that does not develop kinks or singularities.
- Regularity: The authors established $C^{2, \alpha}$ regularity estimates, ensuring the solution remains smooth even near the nozzle corners.
Conclusion and Future Directions
This work provides the first rigorous mathematical proof for the stability of transonic contact discontinuities in 2D nozzles. While the proof is currently limited to finite nozzle lengths and small perturbations in 2D, it lays the groundwork for future studies into 3D axisymmetric flows and larger-scale transonic instabilities in engineering applications.
Summary updated