Abstract
Rapid emergence of smart mobility necessitates high-volume bursty data transmission over a single link between a target vehicle and its designated edge computing-enabled Base Station (BS) or Roadside Unit (RSU), which must be completed within a short time period when the vehicle traverses the coverage area. However, in bandwidth-limited scenarios, conventional communication systems face a fundamental throughput ceiling at each single vehicle. This limitation persists even when all time-frequency resources are allocated to a single vehicle, as the underlying channel lacks sufficient spatial diversity to support higher data rates. To break this throughput ceiling, in this paper, we propose a novel reflection-enhanced transmission framework by strategically employing dedicated specular reflecting surfaces along roadways to proactively augment the transmission environments. This setup concentrates dispersed signals from multiple directions toward a target vehicle, analogous to the light-focusing effect of a concave magnifying lens, thereby enhancing the spatial diversity and achievable rank of an individual channel. This allows a BS to allocate more transmission layers to one single user, consequently significantly raising the throughput ceiling for individual vehicles. Moreover, we also introduce dynamic virtualization methods for reflecting panel patch groups, compatible with existing communication systems, to flexibly manage interference with other coexisting users. Furthermore, collaborative rotation among multiple reflecting panels is introduced to enhance signal concentration. Finally, the schematic effectiveness is rigorously validated through 3GPP-compliant system-level simulations, demonstrating significant throughput boosts.
Introduction
Modern smart mobility applications, such as real-time high-definition (HD) map updates and sensor data sharing for autonomous driving, require massive, bursty data exchanges. These exchanges must often occur within the few seconds a vehicle remains within range of a specific Base Station (BS) or Roadside Unit (RSU).
Existing 5G systems face a "throughput ceiling" for individual users. Even when a BS allocates all available frequency resources to a single vehicle, the physical environment may only provide a single dominant line-of-sight path. In MIMO (Multiple-Input Multiple-Output) terms, this results in a "low rank" channel, preventing the system from sending multiple parallel data streams. Essentially, while the "pipe" is wide, the "flow" is restricted by a lack of spatial diversity.
The Reflection-Enhanced Transmission Framework (RETF)
To address this, we propose the Reflection-Enhanced Transmission Framework (RETF). Instead of relying on complex Intelligent Reflecting Surfaces (IRS) that require active electronic phase control, this framework utilizes Dedicated Specular Reflective Surfaces (DSRS)—low-cost, rotatable metallic plates. By strategically placing these surfaces along roadways, the system proactively augments the wireless environment to create artificial multipath components.
Key technical components include:
- Virtual RPP Groups (VRGs): The system organizes small reflecting patches into logical groups, allowing the BS to "virtualize" the roadside environment and activate only the patches needed for a specific target vehicle.
- State-Switching Mechanism (SSM): To prevent reflections from interfering with other "Sensitive Users" (SUs) on the road, panels physically rotate away when not in use.
- Rotational Collaborative Team (RCT): Multiple groups of panels work together to focus signals on a single vehicle, much like a magnifying glass focuses sunlight, significantly boosting the channel rank.
System Architecture and Optimization
The proposed RPP-DGV system integrates with conventional communication networks to manage these resources dynamically. It utilizes real-time Channel State Information (CSI) and user distributions to reorganize virtual groups.
A Greedy Stepwise Search Algorithm (GSSA) is employed to optimize these virtual groups in real-time as traffic patterns change. Furthermore, an Alternating Neighbor Selection (ANS) method coordinates the mechanical rotation of panels, ensuring that as a vehicle moves, the next set of panels is pre-positioned and ready for transmission, thereby mitigating mechanical latency.
Performance Evaluation
The framework was validated through 3GPP-compliant System-Level Simulations (SLS). The results demonstrated dramatic improvements over conventional 5G setups:
- Channel Rank Boost: The average channel rank increased from 1.38 to 2.25, enabling more parallel data layers.
- Spectral Efficiency (SE) Gains: SE increased by 56.3% in center regions and up to 118.3% in edge regions when utilizing a team of 8 virtual groups.
- Minimal Interference: Despite the added reflections, the average SE loss for other users on the road was kept below 3%.
Conclusion and Future Work
By treating the wireless environment as a programmable component rather than a static bottleneck, the RETF successfully shatters the throughput limits of vehicular links. Future research will focus on addressing mechanical wear and tear, exploring 3D deployment strategies (e.g., on building walls), and conducting real-world hardware trials to account for environmental factors like weather and alignment errors.
Summary updated