Abstract
Adversarial training (i.e., training on adversarially perturbed input data) is a well-studied method for making neural networks robust to potential adversarial attacks during inference. However, the improved robustness does not come for free but rather is accompanied by a decrease in overall model accuracy and performance. Recent work has shown that, in practical robot learning applications, the effects of adversarial training do not pose a fair trade-off but inflict a net loss when measured in holistic robot performance. This work revisits the robustness-accuracy trade-off in robot learning by systematically analyzing if recent advances in robust training methods and theory in conjunction with adversarial robot learning, are capable of making adversarial training suitable for real-world robot applications. We evaluate three different robot learning tasks ranging from autonomous driving in a high-fidelity environment amenable to sim-to-real deployment to mobile robot navigation and gesture recognition. Our results demonstrate that, while these techniques make incremental improvements on the trade-off on a relative scale, the negative impact on the nominal accuracy caused by adversarial training still outweighs the improved robustness by an order of magnitude. We conclude that although progress is happening, further advances in robust learning methods are necessary before they can benefit robot learning tasks in practice.
Introduction: The Robustness-Accuracy Dilemma
In deep learning, there is a notorious "robustness-accuracy tradeoff": training a model to be resistant to adversarial attacks—tiny, intentional perturbations to input data—usually causes its accuracy on normal, "clean" data to drop.
In robotics, this tradeoff is particularly painful. A 5% drop in accuracy on a standard benchmark is a statistic; a 5% drop in a self-driving car’s ability to detect a lane can be a catastrophe. Previous research suggested that adversarial training (AT) was a "net loss" for robots. This paper investigates whether modern "tricks of the trade"—such as massive models, new architectures like Vision Transformers, and better optimization—can finally make adversarial training a "fair trade" for robotics today.
Methods: Modernizing Adversarial Training
The authors systematically test five modern advancements to see if they can mitigate the performance hit caused by adversarial training:
- Overparameterization: Using much larger models (e.g., increasing parameters from 440k to 7.7M) to provide the capacity needed for both accuracy and robustness.
- Vision Transformers (ViTs): Testing if attention-based architectures are inherently more robust than traditional Convolutional Neural Networks (CNNs).
- Smooth Activations: Replacing standard ReLU with SiLU (Sigmoid-weighted Linear Unit) to avoid "kinks" in the loss landscape that attackers exploit.
- Adversarial Weight Perturbation (AWP): Injecting noise into the network's weights during training to find more stable, "flatter" minima.
- Hyperparameter Tuning: Increasing weight decay to improve generalization in robust models.
Experimental Setup
The study evaluates these methods across three distinct robotic tasks:
- End-to-End Driving (VISTA Simulator): A high-fidelity simulator where a car predicts road curvature from images, tested across summer, winter, autumn, and night conditions.
- Visual Gesture Recognition: A real-world dataset of 2,029 images used to control a mobile robot via three classes (idle, enable, disable).
- Robot Follow Dataset (LiDAR): 541-dimensional laser range scans for mobile robot navigation, testing "Certified Safety-Domain Training."
Key Insights: Narrowing the Gap
- The "Net Loss" Still Dominates: Even with the best modern techniques, the drop in nominal (clean) accuracy is roughly 10 times larger than the gain in robustness. For a robot, this means trading a high probability of failing in normal conditions for a slightly lower probability of failing under a rare, specific attack.
- Adversarial Training vs. Distribution Shift: Interestingly, adversarial training often hurt the robot's ability to handle natural changes in the environment (like switching from summer to autumn). The models became so focused on defending against pixel-level noise that they lost the ability to generalize to new lighting or weather.
- The Power of Combinations: No single trick solved the problem. The most promising results came from combining multiple independent approaches—specifically, using a Large Vision Transformer paired with Adversarial Weight Perturbation (AWP).
Key Results
- Driving Performance: Standard models (no AT) drove 200/200 test runs perfectly. Models with adversarial training, even the "improved" ones, struggled to complete the same runs safely as the "attack budget" increased.
- Gesture Recognition: A standard ResNet50 achieved 93.5% accuracy. Applying strong adversarial training crashed that accuracy to 41.4%. Even with AWP, it only recovered to 67.7%—still far below the 90% threshold required for reliable robot operation.
- ViT Superiority: In the gesture task, the ViT-Large + AWP model was the standout, achieving a robust validation accuracy of 89.7% while maintaining a test accuracy of 88.9%. This was the closest any model came to a "fair trade."
Conclusion
The primary limitation is that even the "best" robust models in this study still fall short of the performance of standard models in everyday, non-adversarial scenarios. While the field is moving in the right direction, adversarial training is still not a "plug-and-play" solution for robotics. Future work should explore integrating advanced data augmentation (like MixUp) and developing training objectives that prioritize holistic robot performance metrics, such as time-to-collision, rather than just per-frame classification accuracy.
Reference: Lechner, M., Amini, A., Rus, D., & Henzinger, T. A. (2023). Revisiting the Adversarial Robustness-Accuracy Tradeoff in Robot Learning. IEEE Robotics and Automation Letters, 8(3), 1595-1602.
Summary updated