Abstract
As wind turbine capacities scale beyond 5 Megawatts (MW), traditional low-voltage (LV) electrical systems face significant challenges due to high currents, necessitating expensive and heavy cable bundles. This study evaluates the transition to a medium-voltage (10.5kV) doubly-fed electrical system. Comparative analysis shows that increasing stator voltage drastically reduces cable costs and resistive line losses. For a 5.5MW turbine on a 140m tower, the medium-voltage (MV) approach yields a ~60% reduction in cable costs and significantly improves overall economic efficiency, despite higher initial equipment costs.
Introduction
The global wind power industry is rapidly scaling single-unit capacities to 5.X–8.X MW to lower the levelized cost of energy (LCOE). Historically, onshore turbines have utilized low-voltage electrical systems (690V or 1140V). However, the physical relationship between power, current, and voltage ($P = I \times V$) dictates that maintaining low voltage at high power levels results in extremely high currents. Transporting this current down 100+ meter towers requires massive quantities of copper or aluminum cabling, leading to increased material costs, construction complexity, and significant resistive heat losses. This paper investigates stepping up generator stator voltage to 10.5kV as a solution to these bottlenecks.
Methodology
The researchers performed a techno-economic comparison between a standard 1140V LV system and a proposed 10.5kV MV doubly-fed system. In the MV configuration, the stator voltage is increased to 10.5kV while the rotor remains at 1140V.
The study utilized a 5.5MW turbine case study to calculate cable requirements, material costs (copper vs. aluminum), and equipment costs for MV-rated generators, converters, switchgear, and transformers. Additionally, AC line losses were modeled for a 6.0MW turbine, accounting for DC resistance, skin effect, and proximity effect.
Key Results
The transition to medium voltage offers several strategic advantages. For the 5.5MW turbine case study, stator current was reduced from 3046A in the LV system to 331A in the MV system. This reduction has a direct impact on capital expenditure: for a 140m tower using copper cables, costs fell from 101 'w' (approximately 1,010,000 RMB) to 41 'w', representing a 60% saving. Although MV equipment added 28 'w' in costs, the net system cost for a 140m copper-cabled turbine decreased by 32 'w'. Furthermore, operational efficiency improved significantly; for a 6.0MW unit, line losses were reduced from 26.73 kW (LV) to 4.3 kW (MV).
Discussion and Conclusion
The study demonstrates that medium-voltage electrical systems are both technically feasible and economically superior for large megawatt wind turbines. The economic benefits are amplified as tower heights increase, as the savings on cable length significantly outweigh the additional costs of MV-rated electrical components. While results are sensitive to commodity price volatility, the MV approach provides a clear path for scaling onshore turbines. Future research should investigate 35kV direct-output systems to accommodate the 15MW–20MW capacities expected in the next generation of offshore wind developments.
Summary updated