Research on the Development Characteristics and Stages of Cracks in Dongjiahe River Using Tilt Photogrammetry Technology

Lei LiangJournal of Geoscience and Environment Protection 2025 · DOI

Abstract: Cracks are important migration channels and storage spaces for oil and gas, and the peripheral cracks in the Ordos Basin have developed extensively after multiple tectonic movements. Using unmanned aerial vehicle oblique photogrammetry technology to obtain field outcrop image data and establish a three-dimensional model for observation, the NEE and NNW fractures are the most developed in the Yanchang Formation of the study area, while the NW and NNE fractures are slightly developed, all of which are high angle vertical fractures and belong to regional structural fractures. The NNW oriented cracks are restricted by the NEE oriented cracks and developed in the late stage. Combined with the analysis of regional geological background, fracture intersection relationship and tectonic stress field, it is considered that there are two stages of fractures in Dongjiahe, namely, the late Indosinian and Yanshanian.

Introduction

In the Ordos Basin—a major hub for oil and gas in China—the Triassic Yanchang Formation is characterized by "tight" rock with very low porosity and permeability. In these types of reservoirs, natural structural fractures are the primary migration channels and storage spaces for hydrocarbons; without them, extracting oil and gas is incredibly difficult. Understanding the orientation, density, and formation history of these fractures is critical for planning waterflooding and well-pattern deployments.

Study Area and Geological Setting

The research focuses on the Dongjiahe Yanhe section outcrop in Yanchang County, situated within the Ordos Basin. Historically, mapping these fractures required geologists to conduct manual field surveys on rugged outcrops, which is labor-intensive, dangerous, and limited in scale. This study overcomes these limitations by employing digital outcrop technology to analyze the Yishan slope and surrounding tectonic units.

Tectonic units of the Ordos Basin and the location of the study area.

Methodology

To safely and comprehensively analyze the rock faces, the study employed UAV Oblique (Tilt) Photogrammetry.

  • Data Acquisition: A multi-rotor UAV was equipped with a five-lens camera system (one orthophoto lens and four tilted lenses). This setup ensures that both flat terrain and vertical cliff facades are captured in high detail. Ground control points were utilized to ensure geographical accuracy.
  • 3D Reconstruction: The raw images were processed using ContextCapture software. The pipeline involved image feature extraction, dense point cloud reconstruction, and texture mapping to build a highly accurate, photorealistic 3D model of the outcrop.
  • Geological Analysis: Researchers measured fracture strike, dip angle, length, and density directly on the 3D model. They then used crosscutting relationships (observing which cracks intersect or terminate against others) combined with historical tectonic stress field data to deduce the chronological stages of fracture formation.

Fracture Characteristics

The fractures in the Yanchang Formation are predominantly high-angle vertical cracks, perpendicular to the rock layers, forming a distinct "checkerboard" pattern. They are generally devoid of mineral filling, making them excellent conduits for fluids. The study identified two dominant orientations:

  • NEE (North-East-East) fractures: These are the primary, older fractures. They are straight and smooth, extending up to 14.08m (though mostly 0.5 to 5.4m), with a density of 4 to 5 fractures per meter.
  • NNW (North-North-West) fractures: These are secondary, younger fractures. They are shorter, irregularly distributed, and constrained by the NEE fractures. They are more densely packed at 8 to 9 fractures per meter.

Overall fracture spacing is very tight, ranging from 0.1 to 0.5 meters, which significantly enhances the reservoir's effective permeability.

Tectonic Evolution and Stages

By analyzing how fractures intersect, the study established a clear chronology. Because the NNW-oriented cracks are physically restricted (cut off) by the NEE-oriented cracks, the NEE cracks must have formed first. These orientations map directly to known historical tectonic events:

  1. Late Indosinian Movement: Formed the early NEE fractures under NE-SW compression.
  2. Yanshanian Movement: Formed the later NNW fractures under NW-SE compression caused by the collision of the Pacific and Eurasian plates.

Conclusion

UAV tilt photogrammetry effectively digitizes geological field work, allowing for high-precision analysis of inaccessible cliff faces. The study conclusively divides the fracture development in the Dongjiahe section into two stages, providing essential data for optimizing well placement and waterflooding strategies in the Yanchang Formation's tight reservoirs.

Summary updated

Abstract

Cracks are important migration channels and storage spaces for oil and gas, and the peripheral cracks in the Ordos Basin have developed extensively after multiple tectonic movements. Using unmanned aerial vehicle oblique photogrammetry technology to obtain field outcrop image data and establish a three-dimensional model for observation, the NEE and NNW fractures are the most developed in the Yanchang Formation of the study area, while the NW and NNE fractures are slightly developed, all of which are high angle vertical fractures and belong to regional structural fractures. The NNW oriented cracks are restricted by the NEE oriented cracks and developed in the late stage. Combined with the analysis of regional geological background, fracture intersection relationship and tectonic stress field, it is considered that there are two stages of fractures in Dongjiahe, namely, the late Indosinian and Yanshanian.
BibTeX
@article{liang2025research,
  author = {Lei Liang},
  title = {{Research on the Development Characteristics and Stages of Cracks in Dongjiahe River Using Tilt Photogrammetry Technology}},
  journal = {Journal of Geoscience and Environment Protection},
  year = {2025},
  doi = {10.4236/gep.2025.132003},
}
Figure