Abstract
This study evaluates the deteriorating tap water quality in Kherson, Ukraine, revealing that over-exploitation of the Upper Sarmatian aquifer and aging infrastructure have led to significant chemical imbalances. Through hydrochemical analysis of 12 districts, the research finds that many areas suffer from excessive mineralization and hardness, exceeding national safety standards. The paper quantifies these deviations and proposes strategic shifts in water management to mitigate health risks.
Introduction
Kherson has relied on the Upper Sarmatian aquifer for its water supply since the 19th century. However, the system is currently facing a "perfect storm" of hydrogeological and infrastructure failures. Approximately 76% of the city's artesian wells have exceeded their 24-year regulatory lifespan. Furthermore, intensive pumping has created "depression cones" in the water table. This pressure imbalance draws in pollutants—such as ammonia, nitrates, and petroleum products—from upper, contaminated soil layers and adjacent geological horizons. This paper seeks to quantify the chemical impact of these factors on the water actually reaching consumers' taps.
Methods
The researchers employed standard hydrochemical analysis techniques to evaluate samples from 12 distinct districts and suburban areas. Key methods included:
- Titration: Used to determine total alkalinity (neutralization with hydrochloric acid) and chloride levels (Mohr’s method using silver nitrate).
- Complexometry: Utilized Trilon B and metallochromic indicators (Eriochrome Black T and Murexide) to measure total hardness and specific Calcium/Magnesium concentrations.
- Potentiometry: Employed pH meters for precise acidity measurements.
- Volumetric Analysis: Used for sulfate determination via barium chloride precipitation.
- Mathematical Summation: Total mineralization was calculated using the formula $\sum u = \sum k + \sum a$ (the sum of all detected cations and anions).
Results were compared against Ukrainian State Standards (DSTU 7525:2014) and WHO recommendations, as detailed in Figure 1.
Results and Discussion
The study generated a primary dataset consisting of water quality measurements from 12 locations, including city districts like KhBK, Tavriiskyi, and Shumenskyi, as well as suburbs like Kindiyka and Oleshky. The quantitative findings show significant deviations from safety norms across several parameters (see Figure 2).
Key Findings:
- Mineralization: While the optimal range is 0.2–0.5 g/L, levels in the Shumenskyi district reached 1.5 g/L.
- Hardness: The norm is 1.5–7.0 mmol/dm³. The Tavriiskyi district measured a staggering 13 mmol/dm³, nearly double the upper limit.
- Chlorides: In the Shumenskyi district, chloride levels hit 641 mg/dm³, far exceeding the 250 mg/dm³ limit.
- Geographic Inequality: Water quality is not uniform. The "Ostriv" (Island) district provides the highest quality water, while the Shumenskyi and Tavriiskyi districts face the highest risks.
The "depression" risk is a critical insight: over-extraction is a self-reinforcing problem. As the water level drops, the resulting vacuum pulls in pollutants from surface waters and deeper saline layers. High mineralization is not just an aesthetic issue but a physiological one, potentially contributing to cardiovascular and digestive system disorders over long-term exposure.
Conclusion
The tap water in many Kherson districts fails to meet safety standards due to geological stress and infrastructure decay. The authors propose a strategic shift in the city's water management: moving primary water intake to the left bank of the Dnieper region, where cleaner, more abundant reserves are available. They also call for the establishment of a permanent, real-time "hydrosphere monitoring" system to track these changes dynamically.
Summary updated