TL;DR
This paper introduces "Read, Revise, Repeat" (R3), a novel human-in-the-loop system that enables iterative text revision by allowing LLMs to suggest edits and humans to accept or reject them. R3 aims to improve writing quality and efficiency by mimicking the natural, iterative process of human revision, achieving comparable acceptance rates to human edits at early stages.
What Problem Does This Paper Address?
Writing is an inherently iterative process, where authors refine their work through multiple passes. While Large Language Models (LLMs) have shown promise in text revision, they are typically limited to "one-shot" or non-iterative revisions. This means they generate a single set of edits without incorporating feedback or engaging in a back-and-forth refinement process. Applying these models directly to iterative revision can lead to "noisy" edits that require significant human effort to correct. The paper addresses the need for LLM-based systems that can effectively collaborate with human writers in an iterative manner, making the revision process more efficient, productive, and less cognitively demanding.
Methods
The core of the R3 system is a human-in-the-loop iterative text revision process. The system comprises two main components:
- Edit Intention Identification Models: These models predict whether a sentence needs revision and, if so, categorize the edit intention into one of four types: FLUENCY, COHERENCE, CLARITY, and STYLE. This is a two-step prediction process for each sentence.
- Text Revision Generation Model: This model, fine-tuned from a pre-trained LLM (PEGASUS), takes a source sentence and its predicted edit intention to generate a revised sentence.
The iterative process works as follows:
- The system receives a source document.
- At each revision depth (iteration), the text revision system generates a set of suggested edits with their corresponding intentions.
- A human user reviews these suggestions and chooses to accept or reject them.
- Accepted edits are incorporated into the document, and this revised document becomes the input for the next revision depth.
- This cycle continues until no further edits are suggested or a maximum revision depth is reached.
The system also includes a user interface that guides users through the process of reviewing and accepting/rejecting edits.
Datasets
- Training Data: The paper utilized a newly collected text revision dataset across three domains: ArXiv, Wikipedia, and Wikinews. This dataset is larger than previous ones, containing approximately 44,270 unique documents and over 292,929 edits (sentence pairs). This data was used to train both the edit intention identification models and the text revision generation model.
- Human Evaluation Data: For human evaluation, 10 documents were randomly sampled from each domain in the test set, with a maximum revision depth of 3.
Key Insights and Ideas
- Mimicking Human Iteration is Key: The paper strongly suggests that replicating the iterative nature of human writing is crucial for effective LLM-assisted revision, moving beyond one-shot approaches.
- Human Feedback Improves Quality and Efficiency: The human-in-the-loop component significantly improves revision quality and reduces the number of iterations and edits needed to achieve a good result.
- Early Iterations are Promising: R3 demonstrates comparable acceptance rates to human edits at early revision depths, indicating its potential for practical use.
- Style Edits are a Strength: While the system's CLARITY edits are frequent, their acceptance rate is lower, suggesting room for improvement. Conversely, R3 shows a surprising ability to generate favorable STYLE edits, which are less common in human revisions.
- User Experience Matters: Qualitative feedback highlights that while the system is useful, UI design and the need for users to still "check the text themselves" are areas for future improvement.
Key Results
- Acceptance Rates: R3 achieved comparable acceptance rates to ground-truth human revisions at revision depth 1 (51.66% vs. 49.15%) and depth 2 (62.06% vs. 67.02%).
- Revision Quality: Human evaluation showed that R3 (SYSTEM-HUMAN) produced better overall quality scores for final revised documents with fewer iterations and edits compared to the SYSTEM-ONLY approach.
- Edit Intentions: FLUENCY edits were most frequently accepted in human-generated revisions. For system-generated edits, CLARITY edits were most frequent but had a lower acceptance rate (58.73%), while STYLE edits, though less frequent in human revisions, were generated more by R3 and had a high acceptance rate (64.6%).
- User Feedback: Users rated the system as convenient (3.66/5) but were neutral on productivity (3.00/5) due to lack of domain knowledge. Satisfaction and retention scores were slightly negative, attributed to UI gaps.
Limitations and Future Work
- Performance Degradation at Deeper Depths: The acceptance rate decreases at revision depth 3. This is attributed to the models being trained on static human revision data, while at test time, they must predict based on potentially different distributions of system-generated revisions.
- UI Improvements: User feedback indicated a need for better UI design, such as addressing misaligned diffs and suboptimal presentation of word-level edits.
- Advanced Interaction: The current user role is limited to accepting/rejecting edits. Future work could explore more advanced interaction interfaces, like asking users to rewrite machine-revised text.
- Larger-Scale Studies: The authors suggest conducting larger user studies to derive more statistically significant insights into optimal revision depths and edit suggestion strategies, and to investigate user behavior with their own texts versus third-party texts.
- Improving Specific Edit Intentions: Further work is needed to improve the system's ability to generate high-quality CLARITY edits.
- More Powerful Generation Models: Developing more powerful text revision generation models is suggested to improve edit quality.
Summary updated