Abstract
Cement is an inexpensive and relatively easily manageable material that is used as a last barrier for nuclear waste disposal. Under these conditions, the cement is in contact with low radiation doses, but there is a distinct possibility of being contaminated with radioactive products. Of particular concern is the medium lived half-life product $^{90}$Sr (28.8 years) due to its ability to replace Ca. $^{90}$Sr undergoes $\beta$-decay to $^{90}$Y which, in turn, $\beta$-decays to stable $^{90}$Zr. In this work, we discuss systematically the chain of non-equilibrium processes that result as a consequence of $\beta$-decay events in cement. We first use density functional-based methods to study the consequences of the sudden increase of the nuclear charge from $Z$ to $Z+1$, a possible induced ionization and the perturbation of the surrounding electronic charge. Secondly, we use molecular dynamics simulations to study the recoil of the daughter nucleus. Finally, we discuss the damage caused by the ionization cascade produced during the propagation of the $\beta$-electron and the resulting chemical and structural perturbation.
Introduction
Cement serves as a critical containment barrier in nuclear waste disposal strategies. Among the various fission products, Strontium-90 ($^{90}$Sr) is particularly problematic due to its chemical similarity to calcium, allowing it to substitute for Ca atoms in the mineral structure of cement—specifically within the Calcium-Silicate-Hydrate (C-S-H) phase. With a half-life of 28.8 years, $^{90}$Sr poses a long-term risk to the structural integrity of the waste barrier as it decays through a two-step process into Yttrium-90 ($^{90}$Y) and finally stable Zirconium-90 ($^{90}$Zr).
This study employs first-principles simulations to investigate the immediate and long-term consequences of these decay events, ranging from attosecond-scale electronic rearrangements to picosecond-scale structural displacements.
Methodology
To capture the complex non-equilibrium dynamics of radioactive decay, the researchers utilized a suite of advanced simulation techniques:
- rt-TDDFT (Real-time Time-Dependent Density Functional Theory): Used to observe the electronic response in the first few femtoseconds following the sudden change in nuclear charge ($Z \rightarrow Z+1$).
- Ehrenfest Dynamics: Calculated the transient forces exerted on neighboring atoms during the electronic upheaval.
- Molecular Dynamics (MD): Simulated the physical "recoil" of the daughter nucleus to determine if it remains stable or is displaced from its lattice site.
- Hybrid Functional Calculations (M06-2X): Identified the localization of "excess" electrons and holes generated by the $\beta$-electron cascade.
Key Insights
Rapid Electronic Neutralization
In isolated atoms or gases, radioactive decay often causes "shake-off" ionization, where the atom loses multiple electrons due to the sudden change in potential. However, simulations within the condensed phase of cement reveal a different behavior. The surrounding C-S-H matrix is sufficiently electron-rich to rapidly neutralize the newly formed daughter nucleus.
As shown in the charge evolution simulations, the valence charge around the decay site undergoes rapid oscillations before stabilizing near ground-state values in less than 1 femtosecond (approx. 1000 attoseconds). This suggests that the electronic environment "heals" almost instantly, mitigating the risk of long-term electronic instability.
Structural Displacement and Recoil
While the electronic shock is quickly absorbed, the mechanical impact of the decay is more significant. The first decay step ($^{90}$Sr $\rightarrow$ $^{90}$Y) imparts a recoil energy of approximately 5 eV, which is generally insufficient to displace the atom from its lattice site. However, the second step ($^{90}$Y $\rightarrow$ $^{90}$Zr) delivers a 20 eV "kick." At this energy level, the Zirconium atom can be knocked out of its original site and migrate into the interlayer diffusion channels of the cement, potentially leading to local structural degradation.
The Hydrogen Gas Challenge
As the high-energy $\beta$-electron travels through the cement, it generates a cascade of secondary electrons. These electrons tend to localize on water molecules and hydroxyl groups within the interlayer regions. The resulting chemical reactions produce hydrogen gas ($H_2$). Over decades of storage, the accumulation of $H_2$ can build significant internal pressure, posing a risk of micro-fractures that could compromise the containment barrier.
Conclusion
This first-principles investigation highlights that while cement is electronically resilient to the immediate shock of $^{90}$Sr decay, the cumulative mechanical and chemical effects—specifically nuclear recoil and radiolytic hydrogen production—pose the primary long-term risks. Understanding these microscopic processes is essential for improving the design and safety assessment of nuclear waste disposal systems.
Summary updated