Price Comparison and Analysis of Alternative Fuels for Indian Cement Industry

Aditya Thakur, Rahul VermaIARJSET 2022 · DOI

Abstract

This paper evaluates the selection of alternative fuels for the Indian cement industry, which currently relies heavily on petroleum coke (pet coke) for firing kilns. While pet coke is cost-effective and energy-dense, its combustion results in significant harmful emissions. Using the UMA cement factory in Udhampur, Jammu and Kashmir as a case study, this research establishes a baseline energy requirement of 120 kg of pet coke per tonne of cement produced. Four alternative fuels—producer gas, natural gas, biogas, and green hydrogen—were analyzed based on energy requirements, market pricing, and $CO_2$ emissions. The study provides a detailed price analysis and graphical comparison of emissions, identifying natural gas as a highly viable immediate alternative.

Introduction

The cement industry is a cornerstone of India’s infrastructure development but remains a major contributor to environmental degradation, accounting for approximately 7% of global carbon emissions. In India, cement kilns predominantly utilize pet coke due to its high calorific value and low market price. However, the environmental cost is steep: pet coke combustion releases high levels of $CO_2$, sulfur dioxide ($SO_2$), and particulate matter, exacerbating air quality issues.

This research seeks to identify a sustainable transition path by evaluating fuels that can maintain the high-temperature requirements (1400°C) of cement kilns while reducing the carbon footprint without undermining economic viability.

Methodology

The study utilized operational data from the UMA cement factory to determine the energy baseline. Producing one tonne of cement requires approximately $4.8 \times 10^4$ Kcal of energy. The manufacturing process, specifically the clinker production phase where fuel is consumed, is illustrated in the process flow below.

Process flow for clinker manufacturing in a cement plant.

Using this baseline, the researchers calculated the mass of alternative fuels required to provide equivalent energy. The "Specific $CO_2$ emission" ($E_{CO2}$) for each fuel was calculated using a mathematical model factoring in carbon content, energy density, and molecular weights. Market pricing data and standard calorific values from the "Engineering ToolBox" were used to conduct a comparative cost analysis.

Key Insights and Fuel Analysis

The Efficiency of Natural Gas

While natural gas has a higher price per kilogram (Rs. 60) compared to pet coke (Rs. 30), its superior calorific value means that 66.7% less fuel mass is required to achieve the same thermal output. This results in a net reduction in fuel costs per tonne of cement.

The Potential of Green Hydrogen

Green hydrogen represents the ultimate "zero-emission" goal. However, at current market rates, it increases fuel costs by approximately 25% over pet coke. The study suggests that as production costs for green hydrogen are projected to fall by 2030, it will become increasingly competitive.

Biogas as a Decentralized Solution

Biogas offers a 29.7% cost reduction compared to pet coke and significantly lower emissions. It is particularly well-suited for rural or decentralized plants with consistent access to organic waste streams.

Comparative Results

The following table summarizes the requirements and impacts of each fuel to produce one tonne of cement:

Fuel Mass Required Total Fuel Cost $CO_2$ Emissions
Pet Coke (Baseline) 120 kg Rs. 3,600 ~380 kg
Natural Gas 40 kg Rs. 2,400 ~110 kg
Biogas 115 kg Rs. 2,530 ~230 kg
Green Hydrogen 16 kg Rs. 4,800 0 kg
Producer Gas 400 kg Rs. 6,000 ~200 kg

Natural gas emerged as the most effective immediate substitute, offering a 33.3% reduction in fuel costs alongside a substantial decrease in carbon emissions.

Conclusion and Future Directions

The analysis demonstrates that transitioning away from pet coke is not only environmentally necessary but economically feasible. Natural gas currently provides the best balance of cost-savings and emission reductions. However, this study focuses primarily on operational fuel costs. Future research should address the capital expenditure (CAPEX) required for kiln retrofitting and the logistical infrastructure needed to transport alternative fuels to remote industrial sites. Additionally, as green hydrogen technology matures, its role as a primary fuel source warrants further technical investigation regarding high-temperature kiln stability.

Summary updated

Abstract

This paper involves selection of alternative fuels for Indian cement industries. Currently pet coke is the major fuel used to fire cement kilns. Its characteristic of being cheap and its appreciable combustion efficiency does not overlook the harmful emission produced during its combustion. In this paper, a case of UMA cement factory located in Udhampur, Jammu and Kashmir is considered. Survey conducted in this cement factory reported that a total of 120 kg of pet coke is used in order to produce one tonne of cement. On the basis of energy requirement for the combustion, four alternative fuels were selected meticulously. This study involves price analysis of each alternative fuel along with pet coke and is detailed analysis is provided tabularly. Moreover, CO2 emission of each fuel in producing one tonne of cement is also calculated in this paper and is provided graphically in this paper.
BibTeX
@inproceedings{thakur2022price,
  author = {Aditya Thakur and Rahul Verma},
  title = {{Price Comparison and Analysis of Alternative Fuels for Indian Cement Industry}},
  booktitle = {IARJSET},
  year = {2022},
  doi = {10.17148/iarjset.2022.9154},
}
Figure