Passive Beamforming Design for Reconfigurable Intelligent Surface Enabled Integrated Sensing and Communication

Xiaojun Yuan, Zhe Xing, Rui Wang, Xiaojun Yuan 0002

Introduction

Integrated Sensing and Communication (ISAC) is a cornerstone of 6G, aiming to unify data transmission and environmental radar sensing within shared hardware and spectral resources. However, traditional ISAC research often relies on the "point target" simplification, treating objects as infinitesimal points. In reality, targets possess physical cross-sections that significantly influence signal scattering. Furthermore, high-frequency signals like mmWave suffer from severe blockage. This paper addresses these challenges by leveraging Reconfigurable Intelligent Surfaces (RIS) to create virtual line-of-sight (LoS) paths and accounting for the actual physical size of targets.

System Architecture and the "Double Path Loss" Challenge

The proposed system utilizes an RIS—a "smart mirror" of reflecting elements—to facilitate communication with a User Equipment (UE) and sensing of a target (e.g., a drone) that may be obscured from the Base Station (BS).

Figure 1: RIS-aided ISAC system model illustrating the transmission, reflection, and echo paths between the BS, RIS, target, and UE.

As shown in Figure 1, sensing via an RIS involves a "double reflection" path (BS → RIS → Target → RIS → BS), which leads to massive signal attenuation. To overcome this, the authors optimize both active beamforming at the Base Station and passive phase shifts at the RIS. A key innovation is the introduction of Ultimate Detection Resolution (UDR), a metric representing the minimum scattering surface area required for a target to be detectable, moving beyond simple SNR-based metrics.

Methods: Joint Beamforming and Temporal Strategy

The authors develop a physics-based model to characterize RIS reflections, integrating illumination power over the target's scattering surface area to derive detection probability. They propose an Alternative Optimization (AO) framework to solve the non-convex problem of maximizing communication quality while guaranteeing target detection.

Figure 4: The proposed ISAC strategy showing the time-slotted sensing directions (left) and the spatial beamforming toward the UE and multiple sensing directions (right).

The sensing strategy, illustrated in Figure 4, involves a time-slotted approach. While UE communication is maintained toward $\Psi_U$ throughout the ISAC duration $T$, the RIS scans different sensing directions $\Psi_s(q)$ in successive time slots. This allows the system to search for targets across a wider angular spread. The RIS phase shifts are optimized using a Successive Convex Approximation (SCA) algorithm, employing the Charnes-Cooper transformation and first-order Taylor expansions to handle complex constraints.

Key Results and Insights

Numerical simulations demonstrate that accounting for target size is crucial. In scenarios with practical target dimensions, the proposed design maintains a 90% detection probability. In contrast, traditional point-target models fail significantly, with detection probabilities dropping as low as $10^{-5}$ because they focus energy too narrowly, failing to account for the target's actual scattering behavior.

Furthermore, the study highlights the scaling benefits of RIS: increasing the number of elements ($N$) from 25 to 100 can boost echo strength by 20 dB, making RIS a highly energy-efficient "green" technology for 6G sensing. The system reveals a fundamental three-way trade-off between communication rate, sensing probability, and the duration of the sensing slots.

Conclusion

By moving beyond the point-target fallacy and utilizing RIS to bypass blockages, this research provides a robust framework for practical ISAC deployment. Future work will extend this model to multi-user and high-mobility scenarios, further bridging the gap between theoretical ISAC and real-world 6G environments.

Summary updated

BibTeX
@article{yuan2023passive,
  author = {Xiaojun Yuan and Zhe Xing and Rui Wang and Xiaojun Yuan},
  title = {{Passive Beamforming Design for Reconfigurable Intelligent Surface Enabled Integrated Sensing and Communication}},
  journal = {IEEE Trans. Communications},
  year = {2023},
  doi = {10.1109/tcomm.2023.3244246},
}
Figure