Online Power Control Optimization for Wireless Transmission with Energy Harvesting and Storage

Fatemeh Amirnavaei, Min Dong

Abstract

We consider wireless transmission over fading channel powered by energy harvesting and storage devices. Assuming a finite battery storage capacity, we design an online power control strategy aiming at maximizing the long-term time-averaged transmission rate under battery operational constraints for energy harvesting. We first formulate the stochastic optimization problem, and then develop techniques to transform this problem and employ techniques from Lyapunov optimization to design the online power control solution. In particular, we propose an approach to handle unbounded channel fade which cannot by directly dealt with by Lyapunov framework. Our proposed algorithm determines the transmission power based only on the current energy state of the battery and channel fade conditions, without requiring any knowledge of the statistics of energy arrivals and fading channels. Our online power control solution is a three-stage closed-form solution depending on the battery energy level. It not only provides strategic energy conservation through the battery energy control, but also reveals an opportunistic transmission style based on fading condition, both of which improve the long-term time-averaged transmission rate. We further characterize the performance bound of our proposed algorithm to the optimal solution with a general fading distribution. Simulation results demonstrate a significant performance gain of our proposed online algorithm over alternative online approaches.

Introduction

In the push for "green" communications, energy harvesting (EH) from sources like solar or wind is a promising way to power remote sensors or base stations. However, EH introduces two major layers of randomness: the energy source itself is intermittent, and the wireless channel fades over time. Most existing solutions either rely on "offline" optimization—assuming perfect knowledge of future energy and channel states—or require complex statistical models of these processes, which are difficult to obtain in dynamic environments. Furthermore, many models ignore realistic battery constraints, such as finite capacity and maximum charging/discharging rates. This paper bridges the gap by designing a practical, statistical-knowledge-free controller that handles these real-world constraints.

System Model

The system consists of a wireless transmitter equipped with an energy harvesting device and a finite-capacity battery. The transmitter sends data over a fading channel to a receiver.

System model of an energy-harvesting wireless transmitter with finite battery storage.

As shown in the figure, energy $E_a(t)$ is harvested and stored in a battery with current level $E_b(t)$ and maximum capacity $E_{max}$. The transmitter (T) uses the stored energy to transmit signals over a channel with gain $\gamma(t)$ to the receiver (R). The objective is to maximize the long-term average transmission rate by dynamically adjusting the transmission power based on the battery state and channel conditions.

Proposed Methodology

The researchers leverage the Lyapunov optimization framework, typically used to stabilize network queues, to manage the battery state. They transform the long-term rate maximization problem into a "drift-plus-cost" minimization problem.

Key technical steps include:

  • Virtual Queues: A virtual queue tracks the battery's state of charge relative to a target level. Maintaining stability in this virtual queue ensures the physical battery never overcharges or depletes.
  • Problem Relaxation: Strict per-slot battery constraints are relaxed into long-term averages to make the optimization tractable. The authors then prove that the resulting solution still satisfies strict per-slot limits.
  • Handling Unbounded Fading: Standard Lyapunov techniques often struggle with unbounded variables like Rayleigh fading. The authors introduce a novel "outage" mechanism and a time-averaged battery tracking method to maintain stability even during extreme channel events.
  • Closed-Form Solution: The resulting algorithm is computationally efficient, following a three-stage logic: if the battery is low, stop transmission; if it's high, transmit at max power; if it's in the middle, use a "water-filling" style power level based on the current channel gain.

Performance Evaluation

The algorithm was evaluated using numerical simulations with energy arrivals modeled as a compound Poisson process and channel fading modeled as Rayleigh fading. The proposed strategy was compared against several benchmarks, including a greedy approach, power halving, and Energy Adaptive Water-Filling (EAWF).

Key Results and Insights

  • Performance Gain: The proposed algorithm achieved a 70% higher average rate than the greedy approach and outperformed EAWF and power halving by 30% to 50%.
  • Battery Size Efficiency: Performance saturates quickly as battery size increases, suggesting that near-optimal transmission rates can be achieved even with relatively small, cost-effective batteries.
  • Zero-Knowledge Requirement: The transmitter does not need to know the statistics (e.g., average solar intensity or fading levels) of the environment; it only requires the current battery level and channel state.
  • Scalability: The logic extends to MISO (Multiple-Input Single-Output) beamforming, where multiple antennas focus the signal to improve efficiency.

Conclusion and Future Work

This work provides a robust, real-time power control strategy for energy-harvesting wireless systems. While highly effective, the current model assumes perfect Channel State Information (CSI) and ignores static circuit power consumption. Future research could incorporate the energy costs of channel estimation and electronics, as well as extend the framework to multi-user scenarios where users compete for shared resources.

Summary updated

Abstract

We consider wireless transmission over fading channel powered by energy harvesting and storage devices. Assuming a finite battery storage capacity, we design an online power control strategy aiming at maximizing the long-term time-averaged transmission rate under battery operational constraints for energy harvesting. We first formulate the stochastic optimization problem, and then develop techniques to transform this problem and employ techniques from Lyapunov optimization to design the online power control solution. In particular, we propose an approach to handle unbounded channel fade which cannot by directly dealt with by Lyapunov framework. Our proposed algorithm determines the transmission power based only on the current energy state of the battery and channel fade conditions,without requiring any knowledge of the statistics of energy arrivals and fading channels. Our online power control solution is a three-stage closed-form solution depending on the battery energy level. It not only provides strategic energy conservation through the battery energy control, but also reveals an opportunistic transmission style based on fading condition, both of which improve the long-term time-averaged transmission rate. We further characterize the performance bound of our proposed algorithm to the optimal solution with a general fading distribution. Simulation results demonstrate a significant performance gain of our proposed online algorithm over alternative online approaches.
BibTeX
@article{amirnavaei2016online,
  author = {Fatemeh Amirnavaei and Min Dong},
  title = {{Online Power Control Optimization for Wireless Transmission with Energy Harvesting and Storage}},
  journal = {IEEE Trans. Wireless Communications},
  year = {2016},
  url = {https://openreview.net/forum?id=vDFv73L6im},
}
Figure