On the Performance of Dual-Hop Systems over Mixed FSO/mmWave Fading Channels

Yan Zhang, Jiayi Zhang, Liang Yang, Bo Ai, Mohamed-Slim Alouini

Abstract

This paper investigates the performance of dual-hop communication systems integrating Free-Space Optical (FSO) backhaul with millimeter-wave (mmWave) access networks. By modeling the FSO link using the Gamma-Gamma distribution and the mmWave link via the Fluctuating Two-Ray (FTR) model, we derive novel closed-form expressions for outage probability, average bit error probability, and effective capacity. Our analysis, validated by Monte Carlo simulations, provides insights into the impact of atmospheric turbulence, pointing errors, and relaying protocols on system reliability and quality of service for 5G/6G networks.

Introduction

The evolution toward 5G and 6G networks necessitates the deployment of dense "small cells" utilizing mmWave technology to meet massive data rate demands. However, the high cost and physical constraints of traditional optical fiber backhauling present significant deployment challenges. Free-Space Optical (FSO) links offer a cost-effective, high-bandwidth alternative for these backhaul connections.

Despite their potential, FSO links are highly susceptible to atmospheric turbulence and pointing errors caused by structural vibrations or thermal expansion. Simultaneously, mmWave signals face complex fading in urban environments. This study addresses the need for a unified mathematical framework to analyze mixed FSO/mmWave systems, accounting for the specific physical characteristics of both propagation media.

System Model and Methodology

The system under consideration is a dual-hop relay network where data is transmitted from a source (S) to a relay (R) over an FSO link, and subsequently from the relay to a destination (D) over a mmWave link.

System model of the dual-hop mixed FSO/mmWave communication link.

Channel Modeling

The FSO link is modeled using the Gamma-Gamma distribution, which effectively captures both small-scale and large-scale atmospheric turbulence, alongside pointing error impairments. For the mmWave link, the Fluctuating Two-Ray (FTR) model is employed. The FTR model is chosen for its superior fit to experimental 28 GHz data compared to traditional Rayleigh or Rician models, making it highly relevant for modern urban deployments.

Relaying and Analysis

The study evaluates two primary relaying protocols:

  • Amplify-and-Forward (AF): The relay amplifies the received signal before retransmission.
  • Decode-and-Forward (DF): The relay decodes, re-encodes, and retransmits the data.

To derive exact performance metrics, the authors utilize complex bivariate Fox’s H-functions. High-SNR asymptotic analysis is also performed to extract diversity gain formulas, providing immediate practical engineering insights.

Performance Analysis and Key Results

The analytical framework yielded several critical insights into the behavior of hybrid systems:

  1. Diversity Order: The system's diversity gain is constrained by the "weakest link" in the chain. For AF relaying, the diversity order is determined by $\min(2, \xi^2/r, \alpha/r, \beta/r)$, where $\xi$ represents pointing errors and $\alpha, \beta$ are turbulence parameters.
  2. Detection Modes: Heterodyne detection significantly outperforms Intensity Modulation/Direct Detection (IM/DD) in mitigating atmospheric turbulence, albeit at the cost of increased implementation complexity.
  3. Relay Performance: While DF relaying is generally superior at low SNR, AF relaying can achieve higher ergodic capacity at high SNR under specific channel conditions.
  4. Effective Capacity: The analysis of effective capacity is particularly relevant for real-time applications, as it incorporates delay constraints and Quality of Service (QoS) requirements.

The derived closed-form expressions were validated via Monte Carlo simulations, showing perfect alignment across various turbulence and pointing error scenarios. The series-based solutions using Fox’s H-functions were found to converge rapidly, typically within 30–40 terms to achieve high accuracy.

Conclusion and Future Work

This work provides a robust mathematical toolset for the design and optimization of hybrid FSO/mmWave networks. By accurately modeling the unique fading characteristics of both links, the proposed framework enables engineers to predict system performance under realistic atmospheric and urban conditions. Future research will explore the impact of co-channel interference in dense deployments and the influence of hardware impairments, such as phase noise, on system reliability.

Summary updated

BibTeX
@article{zhang2020performance,
  author = {Yan Zhang and Jiayi Zhang and Liang Yang and Bo Ai and Mohamed-Slim Alouini},
  title = {{On the Performance of Dual-Hop Systems over Mixed FSO/mmWave Fading Channels}},
  journal = {IEEE Open J. Commun. Soc.},
  year = {2020},
  url = {https://openreview.net/forum?id=glc7RL6F6a},
}
Figure