Abstract
Reconfigurable Intelligent Surface (RIS) technology, composed of programmable actuators, is a promising solution for manipulating Electromagnetic (EM) wavefronts to enhance wireless network performance. However, configuring reflection coefficients for multi-user scenarios remains a significant challenge. This paper proposes an efficient, analytical reconfiguration technique for multi-beam radiation patterns, bypassing time-consuming optimization. We analyze performance in indoor and outdoor environments, demonstrating substantial gains in channel capacity and system throughput—exceeding an order of magnitude in outdoor scenarios. These results suggest that multi-user RIS can significantly empower next-generation wireless networks.
Introduction: The Blockage Problem in 5G and Beyond
As wireless communication migrates toward millimeter-wave (mmWave) and sub-THz frequencies for 5G-Advanced and 6G, signals become extremely susceptible to "blockage." Physical obstacles like walls or moving vehicles can completely sever high-frequency connections. Reconfigurable Intelligent Surfaces (RIS)—arrays of sub-wavelength "unit cells"—offer a solution by acting as smart mirrors that reflect signals around obstacles, creating a "virtual line-of-sight."
While RIS research has traditionally focused on single transmitter-receiver pairs, scaling to multiple users introduces significant hurdles:
- Computational Complexity: Real-time mobile tracking requires faster configuration than iterative optimization algorithms can provide.
- Hardware Efficiency: Controlling both amplitude and phase increases cost and power consumption.
- Latency Trade-offs: Standard multiplexing techniques like Time Division Multiplexing (TDM) often introduce unacceptable delays.
Proposed Method: Analytical Phase-Only Metasurface Coding
The authors introduce a Phase-Only Metasurface Coding technique that relies on an analytical model rather than iterative optimization. This approach addresses the multi-user challenge through several key principles:
- Superposition Principle: Required phase profiles for individual users are calculated and aggregated into a single RIS configuration.
- Energy Conservation: By using phase-only control, the RIS avoids the internal energy absorption inherent in amplitude-shaping methods, redistributing the total impinging energy into desired directions.
- Direct Mapping: Instead of searching a massive solution space (e.g., $4^{100}$ possibilities), a direct formula maps the required phase gradient to the unit cells, enabling sub-millisecond reconfiguration.
Performance Evaluation and Results
The system was evaluated using 3GPP-standardized channel models (TR 38.901) for two primary scenarios:
- Indoor Office: A Small Cell Base Station (SCBS) blocked by a wall. The RIS achieved a peak data rate of ~2.2 Gbps, with significant gains for users within 1–2 meters of the surface.
- Urban Micro (UMi): An outdoor scenario where a Macro Cell Base Station (MCBS) lacks line-of-sight to users.
Key Findings
- Throughput Gains: In outdoor scenarios with 7 users, the RIS-enabled system provided more than one order of magnitude higher channel capacity compared to a baseline macro-cell-only system.
- Directivity Advantages: The phase-only method consistently outperformed amplitude-phase methods in terms of directivity (dBi) because it avoids power losses from amplitude modulation.
- Latency Compliance: The analytical nature of the configuration allows the RIS to meet the strict sub-millisecond latency requirements of 5G/6G standards.
Conclusion and Future Directions
This work demonstrates that analytically configured, phase-only RIS can effectively serve multiple users simultaneously with high efficiency. Future research will focus on moving beyond broadcast modes to support multi-stream MIMO (multicast/unicast) and developing mathematical models for near-field (Fresnel zone) interactions as RIS deployments grow in size and proximity to users.
Summary updated