On the Enabling of Multi-Receiver Communications With Reconfigurable Intelligent Surfaces

Hamidreza Taghvaee, Akshay Jain, Sergi Abadal, Gabriele Gradoni, Eduard Alarcón, Albert Cabellos‐Aparicio

TL;DR

Researchers have developed a new analytical method to configure Reconfigurable Intelligent Surfaces (RIS) for multi-user communication using phase-only control. By ditching complex optimization algorithms and power-hungry amplitude adjustments, this approach enables real-time, high-throughput beamforming that significantly outperforms traditional macro-cell setups in blocked environments.

What Problem Does This Paper Address?

As we move toward 5G-Advanced and 6G, we are increasingly relying on millimeter-wave (mmWave) frequencies. While these bands offer massive bandwidth, they have a major weakness: they are easily blocked by walls, trees, or even people. If you lose Line-of-Sight (LoS), your connection often drops.

Reconfigurable Intelligent Surfaces (RIS)—essentially "smart mirrors" made of thousands of tiny antennas (unit cells)—can solve this by reflecting signals toward users in "blind spots." However, serving multiple users at once is difficult. Current methods either:

  1. Time-slice the signal (TDM): This creates lag (latency) that violates 5G standards.
  2. Split the surface (SDM): This weakens the signal's focus (directivity).
  3. Complex Optimization: Finding the perfect "reflection map" for multiple beams using math solvers is too slow for mobile users.
  4. Amplitude & Phase Control: This requires expensive hardware that often "dims" the signal to shape it, wasting energy.

Methods

The authors propose an analytical reconfiguration technique that focuses exclusively on the phase of the reflected wave.

  • The Superposition Principle: Instead of running a heavy optimization algorithm, they use a closed-form mathematical model. They calculate the required phase profile for each individual user and then "superimpose" them.
  • Energy Conservation Logic: Standard multi-beam theory suggests you need to control both the phase and the amplitude (strength) of the reflection. However, the authors argue that in a lossless system, the total energy must be conserved. They derive an analytical coefficient that allows the RIS to approximate multi-beam radiation using only phase shifts.
  • Hardware-Friendly: Because it only requires phase control, the system can be built with simpler, cheaper unit cells (e.g., using varactors or PIN diodes) rather than complex components that attempt to attenuate signal strength at the surface level.

Datasets

The paper relies on standardized simulation environments rather than static datasets. They used:

  • 3GPP TR 38.901 Models: The industry standard for 5G channel modeling.
  • Indoor Office Scenario: A small cell base station (SCBS) blocked by a wall, where the RIS acts as a bridge to users.
  • Urban Micro (UMi) Scenario: A macro cell base station (MCBS) in a dense city where buildings block the direct path.
  • CST Microwave Studio: Used for full-wave electromagnetic simulations to validate the unit cell behavior.

Key Insights and Ideas

  • Amplitude Control is a "Power Trap": One of the most surprising findings is that "Phase-only" RIS can actually outperform "Amplitude + Phase" RIS. Why? Because to control amplitude, a surface usually has to absorb or "waste" some of the incoming signal. By using phase-only control, the RIS reflects the maximum possible energy, leading to higher directivity as the number of users increases.
  • The Proximity Boost: The RIS is most effective when users are relatively close to it (within 1–10 meters). In these "near-to-mid-field" zones, the RIS can provide a massive jump in Signal-to-Noise Ratio (SNR).
  • Analytical > Iterative: By using a formula instead of an optimization loop, the surface can be reconfigured in microseconds—fast enough to track a moving car or a walking person without dropping the beam.

Key Results

  • Throughput Gains: In the Urban Micro scenario, the RIS-enabled system provided more than an order of magnitude higher channel capacity compared to a standard macro cell base station when serving 7 users.
  • Indoor Performance: For users within 1–2 meters of the RIS, the system achieved data rates of at least 0.5 Gbps, with peak rates hitting ~2.2 Gbps.
  • Efficiency: The phase-only method showed a "considerable increase" in system throughput over the combined amplitude-phase method, especially as the number of users (and thus the number of required beams) grew.

Limitations and Future Work

  • Lossless Assumption: The analytical model assumes perfectly reflective (lossless) unit cells. In the real world, materials have inherent resistance that will slightly degrade performance.
  • Shadow Fading: The current SNR calculations did not account for shadow fading (temporary obstacles moving between the RIS and the user), which is a common real-world headache.
  • Quantization Effects: The study looked at 4-state and 8-state phase shifts. Future work could explore how extremely low-resolution hardware (e.g., 1-bit or 2-bit phase resolution) impacts the accuracy of these analytical beams.

Summary updated

Abstract

The reconfigurable intelligent surface is a promising technology for the manipulation and control of wireless electromagnetic signals. In particular, it has the potential to provide significant performance improvements for wireless networks. However, to do so, a proper reconfiguration of the reflection coefficients of unit cells is required, which often leads to complex and expensive devices. To amortize the cost, one may share the system resources among multiple transmitters and receivers. In this paper, we propose an efficient reconfiguration technique providing control over multiple beams independently. Compared to time-consuming optimization techniques, the proposed strategy utilizes an analytical method to configure the surface for multi-beam radiation. This method is easy to implement, effective and efficient since it only requires phase reconfiguration. We analyze the performance for indoor and outdoor scenarios, given the broadcast mode of operation. The aforesaid scenarios encompass some of the most challenging scenarios that wireless networks encounter. We show that our proposed technique provisions sufficient improvements in the observed channel capacity when the receivers are close to the surface in the indoor office environment scenario. Further, we report a considerable increase in the system throughput given the outdoor environment.
BibTeX
@article{taghvaee2022enabling,
  author = {Hamidreza Taghvaee and Akshay Jain and Sergi Abadal and Gabriele Gradoni and Eduard Alarcón and Albert Cabellos‐Aparicio},
  title = {{On the Enabling of Multi-Receiver Communications With Reconfigurable Intelligent Surfaces}},
  journal = {IEEE Transactions on Nanotechnology},
  year = {2022},
  doi = {10.1109/tnano.2022.3195116},
}
Figure