Odd-even effects in lead-iodide-based Ruddlesden–Popper 2D perovskites

Maryam Choghaei, Maximilian Schiffer, Viren Tyagi, Marcello Righetto, Jiaxing Du, Maximilian Buchmüller, Kai Oliver Brinkmann, Geert Brocks, Patrick Görrn, Laura M. Herz, Shuxia Tao, Thomas Riedl, Selina OlthofJournal of Materials Chemistry A 2025 · DOI

Abstract

Two-dimensional (2D) halide perovskites are a versatile material class, exhibiting a layered crystal structure, consisting of inorganic metal-halide sheets separated by organic spacer cations. Unlike their 3D counterparts, 2D perovskites have less strict geometric requirements, allowing for a wider range of molecules to be incorporated. This potentially offers a way to engineer the properties of a 2D perovskite through adequate selection of the organic spacer cations. Our study systematically analyzes the effect of spacer cation length on the electronic and optical properties of Ruddlesden-Popper lead-iodide-based 2D perovskites, using alkylammonium cations of varying chain lengths. Intriguingly, no linear correlation between interlayer distance and the optical gap or valence band position is observed in our measurements. Rather it matters whether the spacer cation contains an odd or even number of carbon atoms in the chain. Notably, these odd-even effects manifest in variations of ionization energy, optical gap as well as charge carrier mobility. Density functional theory calculations reproduce the changes in optical properties, allowing us to identify the underlying mechanism: while even-numbered carbon chains pack efficiently within the organic spacer layer, the shorter odd-numbered chains increase distortions. These distortions lead to variations in the Pb-I-Pb bond angle within the inorganic sheets, resulting in the observed odd-even effect in the (opto-)electronic properties. This understanding will be helpful to make more informed choices regarding the incorporated spacer molecules which can potentially help to enhance performance when integrating such 2D perovskite interlayers into devices.

Introduction

Two-dimensional (2D) halide perovskites have emerged as robust alternatives to their 3D counterparts, particularly in optoelectronic applications. These materials consist of inorganic semiconducting sheets—typically lead-iodide frameworks—sandwiched between layers of organic "spacer" molecules. The structural flexibility of these spacers allows for significant engineering potential. Historically, the prevailing wisdom suggested that increasing the length of these organic spacers would linearly increase the distance between inorganic sheets, thereby tuning the material's properties through quantum confinement. However, experimental inconsistencies have suggested a more complex relationship. This study investigates how the specific molecular architecture and packing of organic spacers influence the electronic and optical behavior of 2D Ruddlesden–Popper perovskites beyond simple chain length.

Methodology

The research team synthesized a comprehensive series of 2D lead-iodide perovskites using alkylammonium cations with chain lengths ranging from 1 to 10 carbon atoms ($C_1$ to $C_{10}$). The chemical formula for the primary series was $(C_xH_{2x+1}NH_3)_2PbI_4$ (for $x = 3$ to $10$), with 3D Methylammonium Lead Iodide ($MAPbI_3$) serving as a reference baseline.

To characterize the samples, a multi-modal approach was employed:

  • Structural Analysis: X-ray Diffraction (XRD) was used to measure the interlayer $d$-spacing.
  • Electronic Characterization: Ultra-violet Photoelectron Spectroscopy (UPS) determined ionization energy (IE) and valence band positions.
  • Optical Spectroscopy: UV-vis absorption and Photoluminescence (PL) measured the optical band gap.
  • Charge Dynamics: Optical-pump terahertz-probe (OPTP) spectroscopy assessed "in-plane" charge carrier mobility on an ultrafast timescale.
  • Computational Modeling: Density Functional Theory (DFT) was used to simulate molecular packing and bond angles.

Results and Discussion

The Odd-Even Effect in Optoelectronics

The study's most significant finding is that optoelectronic properties do not scale linearly with spacer length. Instead, they exhibit a distinct "odd-even" parity effect. While the interlayer $d$-spacing increased linearly by approximately 1.26 Å per carbon atom, the electronic properties fluctuated based on whether the carbon chain was odd or even.

Even-numbered spacers ($C_4, C_6, C_8$) displayed consistent, stable band gaps. In contrast, short odd-numbered spacers ($C_3, C_5, C_7$) showed a blue-shift in absorption onset of up to 72 meV. This parity also significantly affected charge transport: even-numbered spacers achieved higher in-plane mobilities (~5 cm²V⁻¹s⁻¹) compared to odd-numbered spacers (~2-3 cm²V⁻¹s⁻¹). Meanwhile, the valence band position remained relatively constant across the series (~6.0–6.3 eV), suggesting that the observed band gap changes are primarily driven by shifts in the conduction band.

Structural Origin of Electronic Shifts

DFT calculations provided a mechanistic explanation for these observations. Even-numbered carbon chains pack efficiently, interweaving in a manner similar to a zipper. This efficient packing maintains a more regular inorganic framework. Conversely, odd-numbered chains—especially shorter ones—pack inefficiently. This "clunky" packing forces the inorganic lead-iodide ($Pb-I-Pb$) bonds to tilt and distort. These microscopic distortions alter the orbital overlap within the inorganic sheets, which directly increases the band gap and impedes charge carrier movement.

Thermal Behavior

Interestingly, the odd-even effect in the photoluminescence spectra was found to be temperature-dependent. When the materials were heated to 50°C, the differences between odd and even spacers vanished. At this elevated temperature, the odd-numbered materials undergo a phase transition to a more symmetric structure, effectively matching the performance of the even-numbered counterparts.

Conclusion

This research demonstrates that the parity of organic spacer chains is a critical design parameter for 2D perovskites. By moving beyond simple chain length and considering molecular packing efficiency, researchers can minimize structural distortions in the inorganic framework. These insights provide a structural blueprint for engineering high-performance thin-film electronics and 2D/3D hybrid solar cells, emphasizing the importance of informed spacer selection to maximize charge transport and stability.

Summary updated

Abstract

Two-dimensional (2D) halide perovskites are a versatile material class, exhibiting a layered crystal structure, consisting of inorganic metal-halide sheets separated by organic spacer cations. Unlike their 3D counterparts, 2D perovskites have less strict geometric requirements, allowing for a wider range of molecules to be incorporated. This potentially offers a way to engineer the properties of a 2D perovskite through adequate selection of the organic spacer cations. Our study systematically analyzes the effect of spacer cation length on the electronic and optical properties of Ruddlesden-Popper lead-iodide-based 2D perovskites, using alkylammonium cations of varying chain lengths. Intriguingly, no linear correlation between interlayer distance and the optical gap or valence band position is observed in our measurements. Rather it matters whether the spacer cation contains an odd or even number of carbon atoms in the chain. Notably, these odd-even effects manifest in variations of ionization energy, optical gap as well as charge carrier mobility. Density functional theory calculations reproduce the changes in optical properties, allowing us to identify the underlying mechanism: while even-numbered carbon chains pack efficiently within the organic spacer layer, the shorter odd-numbered chains increase distortions. These distortions lead to variations in the Pb-I-Pb bond angle within the inorganic sheets, resulting in the observed odd-even effect in the (opto-)electronic properties. This understanding will be helpful to make more informed choices regarding the incorporated spacer molecules which can potentially help to enhance performance when integrating such 2D perovskite interlayers into devices.
BibTeX
@article{choghaei2025odd,
  author = {Maryam Choghaei and Maximilian Schiffer and Viren Tyagi and Marcello Righetto and Jiaxing Du and Maximilian Buchmüller and Kai Oliver Brinkmann and Geert Brocks and Patrick Görrn and Laura M. Herz and Shuxia Tao and Thomas Riedl and Selina Olthof},
  title = {{Odd-even effects in lead-iodide-based Ruddlesden–Popper 2D perovskites}},
  journal = {Journal of Materials Chemistry A},
  year = {2025},
  doi = {10.1039/d5ta01234a},
}
Figure