Correction: Formamidinium-based Ruddlesden–Popper perovskite films fabricated via two-step sequential deposition: quantum well formation, physical properties and film-based solar cells

Jing Lü, Tinghuan Yang, Tianqi Niu, Nuo Bu, Yalan Zhang, Shiqiang Wang, Junjie Fang, Xiaoming Chang, Tao Luo, Jialun Wen, Yingguo Yang, Zicheng Ding, Kui Zhao, Shengzhong LiuEnergy 2022 · DOI

This document serves as a formal correction to the research article titled "Formamidinium-based Ruddlesden–Popper perovskite films fabricated via two-step sequential deposition: quantum well formation, physical properties and film-based solar cells," originally published in Energy & Environmental Science (2022, 15, 1144–1155).

Overview

The original publication contained typographical errors regarding the units and specific numerical values of scattering vectors ($q$) used to characterize the crystal structures of formamidinium-based Ruddlesden–Popper (RP) perovskites. These corrections are essential for the accurate identification of phase purity and quantum well (QW) dimensions within the thin films.

The Importance of Precise GIWAXS Data

The primary research focused on overcoming the challenges of synthesizing high-quality RP perovskite films using a two-step sequential deposition method. RP perovskites are layered materials that offer enhanced stability compared to standard 3D perovskites, but controlling the layer thickness (the "$n$" value) is notoriously difficult.

To verify the success of their deposition method, the authors employed Grazing-Incidence Wide-Angle X-ray Scattering (GIWAXS). This technique measures the momentum transfer ($q$) of X-rays bounced off the film. The resulting diffraction peaks act as "fingerprints" for specific crystal orientations and phase dimensions. Incorrectly reported $q$ values or units prevent other researchers from replicating the work or verifying the structural claims.

Technical Adjustments

The correction provides three critical updates to the technical data:

  1. Unit Correction: The notation for diffraction peaks has been corrected from "A¹" to the standard crystallographic unit Å⁻¹ (inverse Angstroms).
  2. Phase Identification: The 3D-like phases in the 2:3 ratio film are now correctly identified by a peak at $q = 1.01\ Å⁻¹$.
  3. Quantum Well Fingerprinting: The $n=2$ quantum wells (specifically $PMA_2FA_{n-1}Pb_nI_{3n+1}$) are characterized by peaks at $q = 0.31$ and $0.62\ Å⁻¹$.

Additionally, the authors noted diffractions at $q = 0.48\ Å⁻¹$ and $0.76\ Å⁻¹$.

Conclusion

By rectifying these values, the authors ensure that the structural analysis of their formamidinium-based RP films is physically accurate and consistent with the laws of X-ray diffraction. These corrections maintain the integrity of the original study's conclusions regarding the effectiveness of two-step sequential deposition for controlling quantum well formation.

Summary updated

Abstract

Correction for ‘Formamidinium-based Ruddlesden–Popper perovskite films fabricated via two-step sequential deposition: quantum well formation, physical properties and film-based solar cells’ by Jing Lu et al. , Energy Environ. Sci. , 2022, 15 , 1144–1155, DOI: 10.1039/D1EE02851K.
BibTeX
@inproceedings{lu2022correction,
  author = {Jing Lü and Tinghuan Yang and Tianqi Niu and Nuo Bu and Yalan Zhang and Shiqiang Wang and Junjie Fang and Xiaoming Chang and Tao Luo and Jialun Wen and Yingguo Yang and Zicheng Ding and Kui Zhao and Shengzhong Liu},
  title = {{Correction: Formamidinium-based Ruddlesden–Popper perovskite films fabricated <i>via</i> two-step sequential deposition: quantum well formation, physical properties and film-based solar cells}},
  booktitle = {Energy},
  year = {2022},
  doi = {10.1039/d2ee90018a},
}
Figure