2D Organic-Inorganic Hybrid Perovskite Light-Absorbing Layer in Solar Cells

Meng Wang, Qunliang Song, Sam ZhangIntechOpen 2020 · DOI · OpenAlex

Abstract

With the rapid development of high-performance perovskite solar cells, instability has become an urgent problem. 2D perovskites are considered potential light-absorbing materials due to their excellent stability. However, preparing high-quality 2D films for photovoltaic devices remains a challenge. This paper summarizes the structural and photophysical properties of 2D perovskite materials, recent progress in 2D cells, and strategies for controlling film quality.

Introduction: The Stability Challenge

Perovskite solar cells (PSCs) have emerged as "rising stars" in photovoltaics, with power conversion efficiencies (PCE) jumping from 3.8% to over 25% in a decade. However, standard 3D perovskites are fragile, degrading rapidly under moisture, heat, and oxygen. 2D organic-inorganic hybrid perovskites offer a solution; their structure—inorganic sheets "sandwiched" between bulky organic spacer cations—is inherently more stable.

Structural and Photophysical Properties

The properties of 2D perovskites are primarily defined by the "n" value, representing the number of inorganic layers between organic spacers. As "n" increases, the material transitions from a purely 2D structure toward a 3D lattice.

Structural evolution of 2D perovskites from n=1 to 3D (n=∞).

Low-n phases are exceptionally stable but possess wider bandgaps, which limits light absorption. High-n phases behave more like efficient 3D materials. This relationship is clearly visible in the optical spectra, where decreasing "n" leads to a blue shift in both absorption and photoluminescence, indicating a wider bandgap.

Absorption and photoluminescence spectra showing the effect of layer thickness (n) on optical properties.

Engineering High-Quality 2D Films

The insulating nature of organic layers presents a hurdle: if the 2D "sandwiches" lie horizontally, they block charge transport. Achieving vertical crystal orientation is critical. Several strategies have been developed:

  • Hot-Casting: Preheating the substrate to favor vertical growth.
  • Additive Engineering: Using chemicals like $NH_4SCN$ to slow crystallization and induce preferred orientation.
  • Slow Post-Annealing (SPA): Allowing internal phases to reorganize into an efficient gradient.
  • Cation Engineering: Utilizing Dion-Jacobson (DJ) phases, which use divalent cations to eliminate weak van der Waals gaps, improving structural integrity.

Key Results and Performance

Recent advancements have pushed 2D RP-phase solar cells to efficiencies exceeding 19%. More importantly, these devices demonstrate remarkable durability, retaining 80–85% of initial efficiency after 900 hours of humidity exposure. Furthermore, techniques like SPA have enabled open-circuit voltages as high as 1.24 V, leveraging quantum confinement to minimize energy loss.

Future Outlook

Despite these gains, an efficiency gap remains compared to 3D PSCs. Future research must address the "obscure" kinetics of crystal growth and charge transport across phase interfaces. Achieving precise phase purity and scaling lab-scale techniques like hot-casting for industrial manufacturing are the next frontiers for 2D perovskite photovoltaics.

Summary updated

Abstract

With the rapid development of high-performance perovskite solar cell, its instability has become an urgent problem to be solved. 2D perovskite is considered as a potential light absorbing material for perovskite solar cells due to its excellent stability. However, the preparation of high quality 2D perovskite films suitable for photovoltaic devices remains a challenge. In this chapter, based on the structural and photophysical properties of 2D perovskite thin film materials, the latest progress in 2D perovskite cells in recent years and the strategy of controlling the film quality of 2D perovskite are summarized, which is of great significance for the further development of 2D perovskite photovoltaic devices.
BibTeX
@inproceedings{wang2020d,
  author = {Meng Wang and Qunliang Song and Sam Zhang},
  title = {{2D Organic-Inorganic Hybrid Perovskite Light-Absorbing Layer in Solar Cells}},
  booktitle = {IntechOpen},
  year = {2020},
  doi = {10.5772/intechopen.93725},
}
Figure