Abstract
This paper addresses the challenge of secure communication in wireless networks where a source must rely on an untrusted relay to reach its destination. Traditional Amplify-and-Forward (AF) schemes suffer from an "interference power dilemma," where the artificial noise required for secrecy consumes the relay's power budget, limiting transmission rates. We present a Modulo-and-Forward (MF) scheme based on nested lattice codes. By performing a modulo operation at the relay, the scheme effectively filters out destination-injected noise while preserving the message signal. Analytical results demonstrate that the MF scheme achieves a secrecy rate within 0.5 bits of the secrecy capacity and significantly outperforms AF in terms of secure degrees of freedom and diversity gain.
Introduction
In many wireless communication scenarios, a source ($S$) requires a relay ($R$) to transmit messages to a destination ($D$). However, if the relay is "untrusted," it must be prevented from decoding the confidential message. A common strategy involves the destination sending "artificial noise" (AN) to jam the relay during the source's transmission phase.
The standard approach, Amplify-and-Forward (AF), creates a fundamental trade-off known as the interference power dilemma. To ensure secrecy, the destination must transmit high-power noise. Since the relay has a finite power budget, it ends up retransmitting a signal dominated by this noise, leaving minimal power for the actual message. This leads to a severe bottleneck in the achievable secrecy rate.
The Modulo-and-Forward (MF) Scheme
To overcome these limitations, the authors propose an MF scheme utilizing nested lattice encoding. The process involves three key stages:
- Source Encoding: The source encodes the message using a nested lattice code, adding a "dither" signal known to all parties to ensure the transmitted signal is uniformly distributed.
- Relay Processing: Instead of simple amplification, the relay performs a modulo operation relative to the source's lattice. This operation "wraps" the received signal (message + noise) into a bounded region. Crucially, this strips away the massive power overhead of the destination's artificial noise. The relay's transmit power remains focused on the message signal, independent of the jamming intensity.
- Destination Decoding: The destination, having knowledge of its own artificial noise, cancels the interference and employs inflated lattice decoding to recover the original message.
Theoretical Performance and Insights
As a theoretical and analytical study, the performance of the MF scheme is evaluated through mathematical proofs and numerical simulations based on standard Gaussian and fading channel models. The scheme offers several advantages over existing methods:
- Near-Optimality: The scheme is proven to stay within 1/2 bit of the theoretical secrecy capacity for any channel realization.
- Robustness and Synchronization: While Decode-and-Forward (DF) requires perfect phase and amplitude synchronization, MF only necessitates symbol-level time synchronization, making it more practical for real-world hardware.
- Secure Degrees of Freedom (G-SDoF): In high-SNR regimes, MF achieves full generalized secure degrees of freedom. In contrast, AF performance collapses as noise power increases to maintain secrecy.
- Diversity Gain and Outage: In fading channels, MF achieves a full diversity gain (G-SDG) of order 1, whereas AF is limited to 0.5. Furthermore, numerical results show that the connection outage probability for MF is roughly half that of AF for the same target rate.
Conclusion
The Modulo-and-Forward scheme provides a powerful middle ground between the simplicity of AF and the efficiency of DF. By decoupling security requirements from relay power constraints, it offers a near-optimal solution for untrusted relay channels. Future work may explore the implementation of high-dimensional lattices on low-power devices and the extension of this framework to MIMO systems.
Summary updated