TL;DR
This paper introduces Time-Domain N-Continuous GFDM (TD-NC-GFDM), a novel GFDM variant designed to significantly reduce spectral leakage and improve sidelobe suppression. By adding a carefully constructed "smooth signal" to the GFDM symbol, TD-NC-GFDM achieves better spectral efficiency and performance compared to existing methods, with a low-interference version offering comparable performance to original GFDM.
What Problem Does This Paper Address?
Generalized Frequency Division Multiplexing (GFDM) is a promising candidate for 5G cellular networks due to its flexibility in time and frequency domain pulse shaping. However, a key limitation of GFDM, particularly with circularly shaped transmitter filters, is the discontinuity introduced at the boundaries of transmitted symbols. This discontinuity leads to spectral leakage and reduced sidelobe suppression, hindering spectral efficiency. While techniques like windowing exist, they often compromise spectral efficiency by requiring extended guard intervals. Existing N-continuous OFDM (NC-OFDM) approaches also face challenges with high interference or complexity. This paper aims to address these limitations by proposing a new GFDM scheme that enhances continuity and improves sidelobe suppression without sacrificing performance.
Methods
The core innovation is the introduction of a "smooth signal," denoted as $w_i(n)$, which is added to the original GFDM symbol $x_i(n)$ to create the N-continuous GFDM signal $\tilde{x}_i(n) = x_i(n) + w_i(n)$. This smooth signal is constructed using a linear combination of basis signals derived from the GFDM transmitter filter and its high-order derivatives.
Two main approaches are presented:
- TD-NC-GFDM with Signal Recovery: This method aims to reduce discontinuities by adding the smooth signal across the entire GFDM symbol. To mitigate the interference caused by this smooth signal, an iterative signal recovery algorithm is proposed at the receiver, which adds complexity.
- Low-Interference TD-NC-GFDM: To overcome the complexity of the signal recovery algorithm and reduce interference, this approach truncates the smooth signal and adds it only to the beginning of the GFDM symbol. This is achieved by redesigning the basis signals using a smooth window function. This method aims to maintain N-continuity while minimizing interference.
The paper also provides theoretical analysis of the Signal-to-Interference Ratio (SIR) for TD-NC-GFDM, demonstrating its superiority over TD-NC-OFDM under certain conditions.
Datasets
Not discussed in the paper. The evaluation relies on simulated channel models (9-path EVA channel model in 3GPP LTE) and AWGN/Rayleigh fading channels.
Key Insights and Ideas
- Continuity is Key: The paper reinforces the idea that improving the continuity of the transmitted signal (specifically, its higher-order derivatives) is crucial for reducing spectral leakage and improving sidelobe suppression.
- The Power of a "Smooth Signal": By strategically adding a designed "smooth signal," the authors demonstrate a novel way to achieve N-continuity in GFDM without relying on complex precoding or windowing techniques that degrade spectral efficiency.
- Trade-off Between Complexity and Interference: The paper presents two solutions that highlight a common trade-off: the full TD-NC-GFDM requires a complex receiver for signal recovery, while the low-interference version simplifies the receiver by carefully designing the smooth signal's placement and form.
- SIR Improvement: Theoretical analysis shows that TD-NC-GFDM offers a significantly higher SIR than TD-NC-OFDM when the number of GFDM subsymbols is greater than one, indicating better interference resilience.
- Low-Interference Version Achieves Original GFDM Performance: A key finding is that the low-interference TD-NC-GFDM can achieve the same Bit Error Rate (BER) performance as the original GFDM, while still providing substantial sidelobe suppression.
Key Results
- Significant Sidelobe Suppression: TD-NC-GFDM and its low-interference variant achieve much more rapid sidelobe decaying compared to TD-NC-OFDM.
- Comparable BER to Original GFDM: The low-interference TD-NC-GFDM achieves the same BER performance as the original GFDM, even in challenging Rayleigh fading channels.
- Improved SIR: For more than one GFDM subsymbol, TD-NC-GFDM exhibits a higher SIR than TD-NC-OFDM.
- Performance with Varying Parameters: Simulation results show that increasing the Higher-Order Derivative (HDO) significantly improves sidelobe suppression. The SIR performance is sensitive to roll-off factors and HDOs, with HDO having a dominant effect.
- Low-Interference TD-NC-GFDM as a Good Choice: The paper concludes that the low-interference TD-NC-GFDM is a practical and effective solution for sidelobe suppression in future communication systems.
Limitations and Future Work
- Receiver Complexity: The original TD-NC-GFDM approach requires an iterative signal recovery algorithm, which increases receiver complexity. The low-interference version addresses this, but the initial proposal has this limitation.
- Interference in Full TD-NC-GFDM: The smooth signal in the full TD-NC-GFDM, when added across the entire symbol, can cause high interference, necessitating the signal recovery.
- Future Work: The paper suggests that the low-interference TD-NC-GFDM is a good choice for future communications, implying its suitability for further development and deployment. The analysis of SIR and BER performance under various channel conditions and system parameters (roll-off factor, HDO) provides a strong foundation for future optimization.
Summary updated