Abstract
A novel movable-element simultaneously transmitting and reflecting surface (ME-STARS)-assisted near-field wideband communication framework is proposed. In particular, the position of each STARS element can be adjusted to combat the significant wideband beam squint issue in the near field instead of using costly true-time delay components. Four practical ME-STARS element movement modes are proposed, namely region-based (RB), horizontal-based (HB), vertical-based (VB), and diagonal-based (DB) modes. Based on this, a near-field wideband multi-user downlink communication scenario is considered, where a sum rate maximization problem is formulated by jointly optimizing the base station (BS) precoding, ME-STARS beamforming, and element positions. To solve this intractable problem, a two-layer algorithm is developed. For the inner layer, the block coordinate descent optimization framework is utilized to solve the BS precoding and ME-STARS beamforming in an iterative manner. For the outer layer, the particle swarm optimization-based heuristic search method is employed to determine the desired element positions. Numerical results show that ME-STARSs can effectively address the beam squint for near-field wideband communications compared to conventional STARSs with fixed element positions.
Introduction
As wireless communications evolve toward 6G, researchers are turning to millimeter-wave (mmWave) and Terahertz (THz) bands to unlock massive bandwidth. However, these high frequencies introduce two critical challenges: the near-field effect and beam squint.
In the near-field, signals do not behave as plane waves; they require precise "spotlight" focusing rather than simple directional steering. Simultaneously, in wideband systems, a fixed phase shift at a surface element only works perfectly for the center frequency. Other frequencies in the band "squint"—they focus at incorrect locations—leading to significant performance degradation. While Simultaneously Transmitting and Reflecting Surfaces (STARS) can provide 360-degree coverage, they are typically fixed-position arrays. To mitigate beam squint, traditional solutions rely on True-Time Delay (TTD) units, which are costly and energy-intensive. This paper proposes a mechanical alternative: Movable-Element STARS (ME-STARS).
The ME-STARS Framework
The core innovation of ME-STARS is the use of mechanical movement as a spatial delay mechanism. By physically adjusting the position of each STARS element via motors, the system can change the signal's travel time ($||p_k - s_m||/c$). This "spatial delay" can be precisely tuned to cancel out the frequency-dependent phase errors that cause beam squint, achieving high-performance beam focusing across large bandwidths without electronic TTD components.
Movement Modes
To balance performance gains with hardware complexity, the authors propose four distinct movement modes for the ME-STARS elements:
- Region-based (RB): Elements move freely in a 2D plane, offering the highest flexibility to eliminate beam squint.
- Horizontal-based (HB) / Vertical-based (VB): Elements are restricted to 1D tracks (horizontal or vertical), simplifying control.
- Diagonal-based (DB): Elements move along diagonal tracks. This mode provides a "virtual" 2D adjustment with 1D control complexity, capturing much of the benefit of the RB mode with lower overhead.
Optimization and Key Insights
Maximizing the system's sum rate is challenging because the base station (BS) precoding, STARS phase shifts, and physical element positions are all coupled. The authors developed a two-layer algorithm to address this:
- Outer Layer: Employs Particle Swarm Optimization (PSO) to search for the optimal physical coordinates for each element.
- Inner Layer: Uses Block Coordinate Descent (BCD) to alternate between optimizing BS precoding and STARS beamforming, utilizing Semidefinite Relaxation (SDR) to handle complex matrix constraints.
Numerical simulations demonstrate that ME-STARS significantly outperforms fixed-position STARS (FP-STARS). In a 10 GHz bandwidth scenario, while FP-STARS sees array gain drop toward zero at the band edges, the RB mode maintains near-perfect gain across the entire spectrum. Furthermore, the DB mode was identified as a "sweet spot," offering the best trade-off between performance gain and hardware complexity.
Conclusion and Future Work
ME-STARS represents a promising mechanical solution for the beam squint problem in 6G wideband near-field communications. While highly effective, the system currently faces limitations regarding mechanical latency, making it most suitable for semi-static environments. Future research will focus on improving channel state information (CSI) acquisition during element movement and extending the model to handle complex non-line-of-sight (NLoS) multi-path environments.
Summary updated