Abstract
A novel movable-element simultaneously transmitting and reflecting surface (ME-STARS)-assisted near-field wideband communication framework is proposed. In particular, the position of each STARS element can be adjusted to combat the significant wideband beam squint issue in the near field instead of using costly true-time delay components. Four practical ME-STARS element movement modes are proposed, namely, region-based (RB), horizontal-based (HB), vertical-based (VB), and diagonal-based (DB) modes. Based on this, a near-field wideband multiuser downlink communication scenario is considered, where a sum rate maximization problem is formulated by jointly optimizing the base station (BS) precoding, ME-STARS beamforming, and element positions. To solve this intractable problem, a two-layer algorithm is developed. For the inner layer, the block coordinate descent optimization framework is utilized to solve the BS precoding and ME-STARS beamforming in an iterative manner. For the outer layer, the particle swarm optimization-based heuristic search method is employed to determine the desired element positions. Numerical results show that: 1) the ME-STARSs can effectively address the beam squint for near-field wideband communications compared to conventional STARSs with fixed element positions; 2) the RB mode achieves the most efficient beam squint effect mitigation, while the DB mode achieves the best tradeoff between performance gain and hardware overhead; and 3) an increase in the number of ME-STARS elements or BS subcarriers substantially improves the system performance.
Introduction
As 6G networks transition toward higher frequencies (mmWave and THz) and wider bandwidths, two significant challenges emerge: the near-field effect and beam squint. In near-field conditions, signals behave as focused beams rather than planar waves. Simultaneously, wideband systems suffer from "beam squint," where a fixed phase shift across a wide frequency range causes beams to focus correctly only at the center frequency, leading to significant performance degradation at the band edges. While True-Time Delay (TTD) circuits can mitigate this, they are often prohibitively expensive and power-intensive.
Proposed ME-STARS Framework
This research introduces Movable-Element Simultaneously Transmitting and Reflecting Surfaces (ME-STARS). By physically adjusting the position of STARS elements, the system creates "spatial delays" that mimic the function of TTD circuits. This mechanical adjustment compensates for phase shifts across different frequencies, effectively focusing the wideband signal in the near field.
Movement Modes
The authors propose four distinct movement modes to balance performance and hardware complexity:
- Region-based (RB): Elements move freely in 2D, providing maximum flexibility.
- Horizontal-based (HB): Elements are restricted to 1D horizontal tracks.
- Vertical-based (VB): Elements move along 1D vertical tracks.
- Diagonal-based (DB): Elements move along diagonal tracks, offering a "virtual 2D" flexibility with 1D hardware.
Optimization Algorithm
To maximize the system sum rate, the paper develops a two-layer optimization algorithm. The inner layer employs Block Coordinate Descent (BCD) and Semidefinite Relaxation (SDR) to optimize electronic beamforming and BS precoding. The outer layer utilizes Particle Swarm Optimization (PSO)—a heuristic search inspired by biological swarming—to determine the optimal physical coordinates for each ME-STARS element.
Key Insights and Results
Numerical simulations at 40 GHz with a 10 GHz bandwidth demonstrate that ME-STARS significantly outperforms conventional fixed-position STARS (FP-STARS).
- Beam Squint Mitigation: The RB mode almost entirely eliminates beam squint, maintaining high array gain across the entire bandwidth.
- Efficiency vs. Complexity: While the RB mode offers the best performance, the Diagonal-based (DB) mode emerged as a highly effective alternative, achieving near-optimal performance with significantly reduced hardware overhead.
- Scaling: System performance improves substantially with an increased number of elements or subcarriers, highlighting the scalability of the ME-STARS approach.
Conclusion and Future Work
ME-STARS provides a cost-effective mechanical solution to the beam squint problem in 6G near-field wideband communications. Future research will address mechanical latency for highly dynamic environments, hardware implementation challenges, and the complexities of channel state information (CSI) acquisition for moving surfaces.
Summary updated