Abstract
Integrated sensing and communication (ISAC) is emerging as a pivotal technology for next-generation wireless networks. However, existing ISAC systems are based on fixed-position antennas (FPAs), which inevitably incur a loss in performance when balancing the trade-off between sensing and communication. Movable antenna (MA) technology offers promising potential to enhance ISAC performance by enabling flexible antenna movement. Nevertheless, exploiting more spatial channel variations requires larger antenna moving regions, which may invalidate the conventional far-field assumption for channels between transceivers. Therefore, this paper utilizes the MA to enhance sensing and communication capabilities in near-field ISAC systems, where a full-duplex base station (BS) is equipped with multiple transmit and receive MAs movable in large-size regions to simultaneously sense multiple targets and serve multiple uplink (UL) and downlink (DL) users for communication. We aim to maximize the weighted sum of sensing and communication rates (WSR) by jointly designing the transmit beamformers, sensing signal covariance matrices, receive beamformers, and MA positions at the BS, as well as the UL power allocation. We propose an efficient two-layer random position (RP) algorithm and an antenna position matching (APM) algorithm to minimize movement distance. Simulation results demonstrate substantial performance improvements and the effectiveness of the proposed algorithms.
Introduction
Integrated Sensing and Communication (ISAC) is a cornerstone of 6G, allowing a single system to simultaneously perform radar sensing and telecommunications. Traditional ISAC systems rely on Fixed-Position Antennas (FPAs), which limit the system's ability to adapt to spatial channel variations. This often results in a performance trade-off where optimizing for sensing degrades communication performance, and vice versa.
Movable Antennas (MAs) offer a paradigm shift by physically adjusting their positions to exploit the "sweet spots" of the wireless channel. However, to fully leverage MAs, a large moving region is required. This expansion pushes the system into the near-field region, where the traditional far-field assumption—that radio waves arrive as planar wavefronts—is no longer valid. In the near-field, waves must be modeled as spherical, introducing new degrees of freedom such as beamfocusing.
System Model
The proposed system considers a full-duplex base station (BS) equipped with separate transmit and receive MA arrays. These arrays operate within a large-size region to serve multiple downlink (DL) and uplink (UL) users while simultaneously sensing multiple targets in the near-field.
As shown in Figure 1, the BS utilizes the Uniform Spherical Wave (USW) model to account for phase differences across the large-aperture array. This modeling is crucial for enabling beamfocusing, where energy is concentrated at a specific 3D coordinate (distance and angle), rather than just a direction as in far-field beamsteering.
Methodology
The optimization of such a system is complex, involving the joint design of beamformers, power allocation, and physical antenna positions. The authors propose a multi-stage algorithmic approach:
1. Two-Layer Random Position (RP) Algorithm
To maximize the Weighted Sum Rate (WSR), the problem is tackled in two layers:
- Outer Layer: This layer randomly samples multiple candidate antenna positions within the designated moving regions to explore the spatial landscape effectively.
- Inner Layer: For each set of sampled positions, an Alternating Optimization (AO) framework is employed. It decomposes the joint problem into sub-problems—such as transmit beamforming, sensing signal covariance, and receive beamforming—which are solved iteratively using Successive Convex Approximation (SCA) and Semidefinite Relaxation (SDR).
2. Antenna Position Matching (APM) Algorithm
Moving antennas incurs mechanical energy costs and time delays. To address this, the authors developed the APM algorithm based on a greedy strategy. Once the optimal target positions are determined, the APM algorithm calculates the best mapping from the initial antenna positions to the target positions to minimize the total physical distance traveled.
Key Insights and Results
The integration of MAs into near-field ISAC systems yields several critical advantages:
- Beamfocusing vs. Beamsteering: In the near-field, MAs enable beamfocusing, allowing the BS to distinguish between users or targets located at the same angle but different distances. This significantly reduces multi-user interference.
- Virtual Aperture Expansion: By moving a limited number of antennas over a large area, the system effectively creates a "virtual" large aperture, extending the near-field region and improving spatial resolution.
- Performance Gains: Simulations at 30 GHz (mmWave) show that the MA-aided system achieves a 13.5% to 19% improvement in WSR compared to traditional FPA systems with the same aperture.
- Operational Efficiency: The APM algorithm successfully reduced the total antenna movement distance by 35% to 47% compared to random assignment baselines, enhancing the practical viability of the system for real-time deployment.
Conclusion
This research demonstrates that Movable Antennas can significantly enhance the performance of near-field ISAC systems. By exploiting the unique properties of spherical wave propagation and optimizing physical antenna placement, the proposed system achieves higher data rates and better sensing accuracy than fixed-antenna counterparts. Future work will focus on reducing the overhead of Channel State Information (CSI) acquisition and improving the robustness of the system against hardware latencies and sensing uncertainties.
Summary updated