Movable Antenna-Aided Near-Field Integrated Sensing and Communication

Jingze Ding, Zijian Zhou, Xiaodan Shao, Bingli Jiao, Rui Zhang

TL;DR

This paper explores how Movable Antennas (MAs) can revolutionize Integrated Sensing and Communication (ISAC) by dynamically reconfiguring the wireless channel. By moving antennas over a large area, a full-duplex base station can exploit "near-field" beamfocusing to significantly improve both sensing accuracy and communication rates while minimizing the physical energy cost of moving the hardware.

What Problem Does This Paper Address?

Integrated Sensing and Communication (ISAC) is a cornerstone of 6G, allowing a single system to "see" the world (radar) and "talk" to users (telecom) simultaneously. However, traditional systems use Fixed-Position Antennas (FPAs). Because the antennas can't move, the system is stuck with whatever spatial channel it gets, often leading to a "zero-sum game" where improving sensing hurts communication.

Movable Antennas (MAs) offer a way out by physically adjusting their positions to find the "sweet spots" in a local area. But there’s a catch: to get the most out of MAs, you need a large moving region. This pushes the system into the near-field, where the traditional "far-field" assumption (that radio waves arrive as flat planes) is no longer valid. Instead, waves must be modeled as spherical. This paper tackles the complex task of jointly optimizing antenna positions and signal processing in this spherical-wave environment.

Methods

The authors model a full-duplex base station equipped with transmit and receive MA arrays serving multiple downlink and uplink users while tracking multiple targets. Their approach involves three main components:

  1. Near-Field Modeling: They utilize the Uniform Spherical Wave (USW) model, which accounts for the phase differences across the antenna array that occur when targets/users are close to a large-aperture array.
  2. Two-Layer Random Position (RP) Algorithm:
    • Outer Layer: Randomly samples multiple candidate antenna positions to explore the spatial landscape.
  3. Inner Layer: For a given set of positions, it uses Alternating Optimization (AO). It breaks the problem into sub-problems (beamforming, power allocation, etc.) and solves them iteratively using Successive Convex Approximation (SCA) and Semidefinite Relaxation (SDR).
  4. Antenna Position Matching (APM) Algorithm: Once the "optimal" positions are found, the system must decide which physical antenna moves to which spot. The authors propose a greedy strategy to minimize the total physical distance traveled, reducing energy consumption and time delay.

Datasets

The paper relies on extensive numerical simulations rather than a static dataset. The environment is modeled at 30 GHz (mmWave) with a moving region of $100\lambda$ (about 1 meter). Path loss and channel coefficients are generated based on established near-field spherical wave models.

Key Insights and Ideas

  • Beamfocusing vs. Beamsteering: This is the "aha moment." In the far-field, you can only steer a beam in a direction. In the near-field, MAs allow for beamfocusing, where energy is concentrated at a specific point in 3D space (distance + angle). This allows the base station to serve users or sense targets that are in the same direction but at different distances with almost zero interference.
  • Virtual Aperture: Moving a few antennas over a large region effectively creates a "virtual" large aperture. This expands the near-field region, allowing the system to use beamfocusing over much larger distances than a compact fixed array could.
  • The Cost of Motion: The authors recognize that moving antennas isn't free. Their APM algorithm treats the transition from "initial" to "optimized" positions as a matching problem, proving that a greedy approach can significantly cut down on the mechanical overhead of the system.

Key Results

  • Significant Rate Gains: The MA-aided system achieved a 13.5% to 19% improvement in the Weighted Sum Rate (WSR) compared to fixed-antenna systems with the same aperture.
  • Interference Suppression: Near-field beamfocusing was shown to produce extremely narrow "main lobes" that precisely hit targets while leaving other areas in "darkness," drastically reducing multi-user interference.
  • Efficiency: The APM algorithm reduced the total antenna movement distance by 35% to 47% compared to a baseline random assignment, making the system much more viable for real-time deployment.
  • Convergence: The optimization algorithms are stable, typically converging within 10 iterations.

Limitations and Future Work

  • CSI Requirements: The study assumes perfect Channel State Information (CSI). In reality, estimating the channel for every possible antenna position is a massive overhead. Future work needs to explore "blind" or "codebook-based" position optimization.
  • Hardware Latency: While the APM algorithm minimizes distance, physical motors still move slower than electrons. The system is currently best suited for slow-fading environments where the geometry of the room doesn't change every millisecond.
  • Robustness: The authors suggest that future extensions should account for sensing channel uncertainty (e.g., not knowing the exact radar cross-section of a target beforehand).

Summary updated

Abstract

Integrated sensing and communication (ISAC) is emerging as a pivotal technology for next-generation wireless networks. However, existing ISAC systems are based on fixed-position antennas (FPAs), which inevitably incur a loss in performance when balancing the trade-off between sensing and communication. Movable antenna (MA) technology offers promising potential to enhance ISAC performance by enabling flexible antenna movement. Nevertheless, exploiting more spatial channel variations requires larger antenna moving regions, which may invalidate the conventional far-field assumption for channels between transceivers. Therefore, this paper utilizes the MA to enhance sensing and communication capabilities in near-field ISAC systems, where a full-duplex base station (BS) is equipped with multiple transmit and receive MAs movable in large-size regions to simultaneously sense multiple targets and serve multiple uplink (UL) and downlink (DL) users for communication. We aim to maximize the weighted sum of sensing and communication rates (WSR) by jointly designing the transmit beamformers, sensing signal covariance matrices, receive beamformers, and MA positions at the BS, as well as the UL power allocation. The resulting optimization problem is challenging to solve. Thus, we propose an efficient two-layer random position (RP) algorithm to tackle it. In addition, to reduce movement delay and cost, we design an antenna position matching (APM) algorithm based on the greedy strategy to minimize the total MA movement distance. Extensive simulation results demonstrate the substantial performance improvement achieved by deploying MAs in near-field ISAC systems. Moreover, the results show the effectiveness of the proposed APM algorithm in reducing the antenna movement distance, which is helpful for energy saving and time overhead reduction for MA-aided near-field ISAC systems with large moving regions.
BibTeX
@article{ding2025movable,
  author = {Jingze Ding and Zijian Zhou and Xiaodan Shao and Bingli Jiao and Rui Zhang},
  title = {{Movable Antenna-Aided Near-Field Integrated Sensing and Communication}},
  journal = {IEEE Transactions on Wireless Communications},
  year = {2025},
  doi = {10.1109/twc.2025.3584833},
}

Loading related content...

Figure